镉（Ⅱ）－2－（2－苯并噻唑偶氮）－5－二甲氨基苯甲酸配合物的吸附伏安法研究及应用

镉（Ⅱ）－２－（２－苯并噻唑偶氮）－５－二甲氨基苯甲酸配合物的吸附伏安法研究及应用徐素君，施清照，张培敏，吴念慈（杭州大学化学系３１００２８）关键词：２－（２－苯并噻唑偶氮）－５－二甲氨基苯甲酸（ＢＴＡＭＢ），镉，吸附伏安法杂环偶氮试剂的极谱性质及其...     

Eastman-Kodak AQ膜修饰电极阴极溶出伏安法测定痕量铁

本文用热处理法成功地制备了性能稳定的Eastman-Kodak AQ/GC修饰电极,对Fe~(3+)/Fe~(2+)及其络合阳离子在该电极上的行为进行了研究。表明AQ膜对Fe~(3+)和Fe~(2+)具有相近的交换能力,可用于Fe~(3+)或Fe~(2+)及其总量的阴极溶出伏安法测定。线性范围分别为2.0×10~(-7)～2.2×10~(-5)mol/L(Fe~(3+))和5.0×10~(-7)～2.0×10~(-5)mol/L(Fe~(2+)),检出限为1.0×10~(-7)mol/L(Fe~(3+))。文中对电极反应和再生进行了探讨。     

吸附溶出伏安法测定普罗帕酮的研究

在pH 6.47的磷酸盐缓冲溶液中,可得到普罗帕酮的吸附溶出峰。峰电位为-1.38V(vs.Ag/AgCl),富集1min,溶出峰电流与普罗帕酮浓度在8.0x10~(-9)～7.0x10~(-7)mol/L范围内呈线性关系。富集4min检测下限为3.0×10(-10)mol/L。该法用于测定普罗帕酮制剂及人血清中的痕量普罗帕酮,均得到了满意的结果,并探讨了电极反应过程机理。     

溶出伏安法测定水中痕量钴

在０．０１ｍｏｌ／ＬＮＨ．Ｈ２Ｏ－ＮＨ４Ｃｌ和３．０×１０＾－５ｍｏｌ／Ｌ安息香缩氨基硫脲体系中，钴产生一灵敏的还原波，其峰电位是－０．９４Ｖ（ｖｓ．ＳＣＥ），峰电流与钴的浓度在２．０×１０－８－１．０×１０＾－６ｍｏｌ／Ｌ范围内成直线关系，检测限为５．０×１０＾－９ｍｏｌ／Ｌ，该法测定水中痕量钴结果令人满意。     

Underpotential deposition studies of copper on glassy carbon

Studies on the deposition and dissolution of copper from 0·5 M sulphuric acid solutions onto glassy carbon (GC) using potential sweep techniques indicated that an additional peak occurs at higher positive potentials than the bulk stripping peak. This peak is identified as due to the stripping of underpotential deposited (UPD) copper. Results of investigations on the effect of sweep rate, deposition potential and time of deposition on the peak characteristics of UPD and bulk deposited copper are also reported.     

微分方法在聚苯骈咪唑修饰电极溶出伏安分析研究中的应用

本文推导了聚苯骈咪唑修饰电极溶出伏安分析中电流对电位的二次方程，并以Ｆｅ（Ｃ２Ｏ４）＾２－３为研究对象，对该方程进行了实验验证，实验结果与理论相吻合。     

Unique solvent effects on selective electrochemical fluorination of organic compounds

Recent studies on solvent effects on electrochemical partial fluorination are reviewed. At first, the historical background and some problems of electrochemical fluorination in organic solvents like acetonitrile (MeCN) are briefly mentioned. Ethereal solvents like dimethoxyethane (DME) and a mixture of DME and MeCN were found to improve both the yield and current efficiency for electrochemical fluorination since these solvent systems effectively suppress anode passivation and overoxidation of fluorinated products once formed during the electrolysis. It was also found that DME stabilizes radical cationic intermediates of 4-arylthio-1,3-dioxolan-2-ones and 3-phenylthiophthalide leading to α-fluorination while dichloromethane (CH₂Cl₂) destabilizes them leading to fluorodesulfurization. On the other hand, imidazolium ionic liquids and liquid fluoride salts like Et₄NF·4HF and Et₃N·5HF exhibited similar effects to CH₂Cl₂. Selective fluorination of hardly oxidizable phthalide was also achieved using a combination of two kinds of ionic liquids (imidazolium triflate and liquid fluoride salts).     

Selenium speciation in foods: Preliminary results on potatoes

The present paper deals with the speciation of selenium in potatoes (enriched or not in selenium). The study was carried out by using differential pulse cathodic stripping voltammetry (DPCSV) for quantifying selenium. Results obtained provide evidence that the selenium content in the protein fraction is rather independent from the selenium added to the plants during their growth. On the contrary, the amount of Se in the non-protein fraction (water and starch) in Se-enriched sample is significantly higher than in non-enriched one, suggesting that it is the main selenium-storing site. In this fraction the Se(VI)/Se(IV) ratio seems independent from selenium application but it may be related to the redox conditions. The accumulation of selenium in the non-protein fraction is tentatively ascribed to the “Se–starch interaction” that should be able to modulate both the Se absorption into proteins and, possibly, its toxic effect for the plant itself.     

Resolving the copper interference effect on the stripping chronopotentiometric response of lead(II) obtained at bismuth film screen-printed electrode

As copper(II) is a common ion in a variety of analytical samples, its effect on the stripping response of lead(II) at bismuth film screen-printed carbon electrode (BFSPCE) was investigated. The study was conducted using a screen-printed three-electrode system (working, counter and reference electrodes), with the carbon-working electrode plated in situ with bismuth film. Copper present at significant concentration level in samples was found to affect the sensitivity of the electrode by reducing the constant current stripping chronopotentiometric (CCSCP) response of lead(II). Recovery of the lead stripping response at the BFSPCE in the presence of copper was obtained when 0.1 mM ferricyanide was added to the test solution. The ferricyanide added circumvents the detrimental effect of copper(II) by selectively masking the copper ions by forming a complex. The analytical utility of the procedure is illustrated by the stripping chronopotentiometric determinations of lead(II) in soil extracts.