Manganese detection in marine sediments: anodic vs. cathodic stripping voltammetry

Three different electroanalytical techniques for the detection of manganese in marine sediments are evaluated. The anodic stripping voltammetry of manganese at an in situ bismuth-film-modified boron-doped diamond electrode and cathodic stripping voltammetry at a carbon paste electrode are shown to lack the required sensitivity and reproducibility whereas cathodic stripping voltammetry at a bare boron-doped diamond electrode is shown to be reliable and selective with a limit of detection, from applying a 60 s accumulation period of 7.4 × 10⁻⁷ M and a sensitivity of 0.24 A M⁻¹. The method was used to evaluate the manganese content of marine sediments taken from Šibenik, Croatia.     

Simultaneous Determination of Iron,Copper, and Cadmium by Adsorptive Stripping Voltammetry in the Presence of Thymolphthalexone

A novel, sensitive and selective adsorptive stripping procedure for simultaneous determination of iron, copper and cadmium is presented. The method is based on the adsorptive accumulation of thymolphthalexone (TPN) complexes of these elements onto a hanging mercury drop electrode, followed by reduction of adsorbed species by voltammetric scan using differential pulse modulation. The influences of control variables on the sensitivity of the proposed method for the simultaneous determination of iron, copper and cadmium were studied using the Derringer desirability function. The optimum analytical conditions were found to be TPN concentration of 2.0 μM, pH of 9.5, and accumulation potential at ?0.4 V vs. Ag/AgCl with an accumulation time of 60 s. The peak currents are proportional to the concentration of iron, copper and cadmium over the 1–80, 0.5–100 and 1–100 ng mL^?1 ranges with detection limits of 0.5, 0.4 and 0.9 ng mL^?1_, respectively. The R.S.D. at a concentration level of 20 ng mL^?1 of iron, copper and cadmium were 2.5%, 0.9% and 1.5% (n=6), respectively. The procedure was applied to the simultaneous determination of iron, copper and cadmium in the tap water and some synthetic samples with satisfactory results.     

Electrocatalytic oxidation and detection of hydrazine at gold electrode modified with iron phthalocyanine complex linked to mercaptopyridine self-assembled monolayer

Electrocatalytic oxidation and detection of hydrazine in pH 7.0 conditions were studied by using gold electrode modified with self-assembled monolayer (SAM) films of iron phthalocyanine (FePc) complex axially ligated to a preformed 4-mercaptopyridine SAMs. The anodic oxidation of hydrazine in neutral pH conditions with FePc-linked-mercaptopyridine-SAM-modified gold electrode occurred at low overpotential (0.35 V versus Ag|AgCl) and the treatment of the voltammetric data showed that it was a pure diffusion-controlled reaction with the involvement of one electron in the rate-determining step. The mechanism for the interaction of hydrazine with the FePc-SAM is proposed to involve the Fe^(III)Pc/Fe^(II)Pc redox process. Using cyclic voltammetry (CV) and Osteryoung square wave voltammetry (OSWV), hydrazine was detected over a linear concentration range of 1.3 × 10⁻⁵ to 9.2 × 10⁻⁵ mol/L with low limits of detection (ca. 5 and 11 μM for OSWV and CV, respectively). At concentrations higher than 1.2 × 10⁻⁴ mol/L the anodic peak potential shifted to 0.40 V (versus Ag|AgCl), and this was interpreted to be due to kinetic limitations resulting from the saturation of hydrazine and its oxidation products onto the redox-active monolayer film. This type of metallophthalocyanine-SAM-based electrode is a highly promising electrochemical sensor given its ease of fabrication, good catalytic activity, stability, sensitivity and simplicity.     

Analytical Aspects of Photoelectron Spectroscopy

Photoelectron spectroscopy is a new technique for experimentally measuring the binding energies of electrons in molecules. The basic principles of the method are outlined and simple guidelines for the interpretation of u.v.-excited photoelectron spectra are laid down. The analytical potential and possible development of the method are briefly surveyed.     

Stripping Analysis of Trace Metals at a Flow-Through Reticulated Vitreous Carbon Electrode after the Preconcentration by Supported Liquid Membrane Technique

Abstract

The performance of a flow-through mercury coated reticulated vitreous carbon (RVC) electrode in the potentiometric stripping analysis (PSA) of trace metals has been examined. A wall-jet glassy carbon cell was used for the comparative experiments. Experimental parameters influencing the stripping signals have been optimised in order to use the stripping analysis after the preconcentration and matrix isolation by supported liquid membrane (SLM) technique. The SLM with di-2-ethylhexyl-phosphoric acid (DEHPA) as the extractant in the membrane liquid for proton driven transport of trace metals across the membrane has been chosen. Results presented for lead determination in river water demonstrate the analytical advantages of coupled technique SLM-PSA.     

Influence of aspect ratio and anisotropy distribution in ordered CoNi nanowire arrays

The size effects on magnetic properties of nanowires arrays were studied varying the nanowires diameter and maintaining the same periodicity among them, for two different nominal compositions of Co and Ni in the alloy form. The competition among magnetocrystalline and shape anisotropies changes drastically from smallest to biggest diameters altering the easy axis direction. In the case of 75% of Co in alloy, experimental values of the effective anisotropy constant (K_eff) vary from positive to negative depending on the diameter, which means a reversal of the easy axis direction. For 50% of Co the shape anisotropy dominates over the magnetocrystalline for all studied diameters.     

Extraction and separation of lanthanides from aqueous chloride and nitrate media using mixtures of binary extractants based on secondary and tertiary amines

1. Download : Download high-res image (97KB)
2. Download : Download full-size image

     

Electroanalytical Techniques for the Detection of Selenium as a Biologically and Environmentally Significant Analyte—A Short Review

This short review deals with the properties and significance of the determination of selenium, which is in trace amounts an essential element for animals and humans, but toxic at high concentrations. It may cause oxidative stress in cells, which leads to the chronic disease called selenosis. Several analytical techniques have been developed for its detection, but electroanalytical methods are advantageous due to simple sample preparation, speed of analysis and high sensitivity of measurements, especially in the case of stripping voltammetry very low detection limits even in picomoles per liter can be reached. A variety of working electrodes based on mercury, carbon, silver, platinum and gold materials were applied to the analysis of selenium in various samples. Only selenium in oxidation state + IV is electroactive therefore the most of voltammetric determinations are devoted to it. However, it is possible to detect also other forms of selenium by indirect electrochemistry approach.     

Asymmetric electrosynthesis: Recent advances in catalytic transformations

Asymmetric synthesis is one of the most important and valuable research fields in modern organic chemistry. Since the use of electricity as a traceless oxidant or reductant under electrochemical conditions, highly reactive intermediates can selectively generate under mild reaction conditions through more environmentally benign conditions compared with the reactions using common chemical oxidants or reductants. Thus, the merging electrochemistry with asymmetric catalysis would provide a unique and powerful approach for the synthesis of optically active compounds under oxidative or reductive conditions. Selected recent (2018–2020) examples of enantioselective electro-organic synthesis using transition metal catalysts or organocatalysts are summarized in this short review. These examples are divided to oxidative and reductive transformations and described together with brief reaction mechanisms.     

A Microcell for Stripping Analysis with Glassy Carbon and Mercury-Plated Glassy Carbon Electrodes

Abstract

A microcell has been constructed for stripping analysis in solution volumes as low as 5 μl, employing a glassy carbon or mercury-plated glassy carbon working electrodes and a three electrode system. Using normal d.c. stripping techniques, as little as 100 picograms of mercury and 10 picograms of lead can be determined. With the more sensitive second harmonic a.c. voltammetric technique, this limit is lowered to 10 picograms of mercury and 1 picogram of lead.