阳极氧化TiN薄膜制备N掺杂纳米TiO2薄膜及其可见光活性

室温下通过电泳沉积(EPD)的方法在Ti片表面制备TiN薄膜, 然后对TiN薄膜进行阳极氧化得到N掺杂多孔纳米结构的TiO2薄膜. 利用X射线衍射(XRD), X射线光电子能谱(XPS), 扫描电子显微镜(SEM)及光电化学方法对得到的薄膜进行表征. XRD测试结果表明, 经过阳极氧化并在350 ℃空气气氛中退火1 h的薄膜中存在锐钛矿晶型的TiO2. XPS的结果表明, 样品中的N元素取代部分O, 且N的摩尔分数为0.95%. SEM显示, 经阳极氧化后薄膜表面出现多孔纳米结构. 光电化学测试结果显示, 阳极氧化提高了N掺杂TiO2薄膜在可见光下的光电响应. 经阳极氧化并热处理的薄膜在0 V电位及可见光照射下光电流密度为2.325 μA·cm-2, 而单纯热处理的薄膜在相同条件下光电流密度仅为0.475 μA·cm-2. 阳极氧化得到纳米多孔结构提高了N掺杂纳米TiO2薄膜的表面积, 从而对可见光的响应增大.     

对映选择性亲电氟化反应研究进展

含氟有机化合物, 特别是手性氟化物在医药、农药及功能性材料等相关领域的作用备受注目. 尽管在分子中有立体选择性地引入一个氟原子一直是有机化学家面临的一个挑战性问题, 近年来在化学家们的不断努力下, 对映选择性氟化反应研究取得重要进展. 高光学活性的手性氟化物可通过手性亲电氟化试剂诱导的立体选择性氟化反应, 基于底物的手性氟化反应以及手性催化剂诱导的不对称催化氟化反应等来制备. 特别是, 手性金属配合物和有机催化剂诱导的不对称催化氟化反应被广泛应用于各类手性氟化物的合成, 已成为不对称氟化反应研究的热点. 全面介绍对映选择性亲电氟化反应研究概况和最新进展, 讨论各种不对称氟化反应的特点及应用范围.     

An optimized digestion method coupled to electrochemical sensor for the determination of Cd, Cu, Pb and Hg in fish by square wave anodic stripping voltammetry

An optimized digestion method coupled to electrochemical detection to monitor lead, copper, cadmium and mercury in fish tissues was developed. Square wave anodic stripping voltammetry (SWASV) coupled to disposable screen-printed electrodes (SPEs) was employed as fast and sensitive electroanalytical method for heavy metals detection. Different approaches in digestion protocols were assessed. The study was focused on Atlantic hake fillets because of their wide diffusion in the human nutrition. Best results were obtained by digesting fish tissue with hydrogen peroxide/hydrochloric acid mixture coupled to solid phase (SP) purification of the digested material. This combined treatment allowed quantitative extraction from fish tissue (muscle) of the target analytes, with fast execution times, high sensitivity and avoiding organic residues eventually affecting electrochemical measurements. Finally, the method has been validated with reference standard materials such as dogfish muscle (DORM-2) and mussel tissues (NIST 2977).     

Synthesis of immobilized TiO2 nanowires by anodic oxidation and their gas phase photocatalytic properties

In this paper, anodic oxidation method was successfully employed to the direct growth of immobilized TiO₂ nanowires on titanium foil in ethylene glycol electrolyte solution contained HF and water. The morphologies of the TiO₂ nanowires could be tuned by changing the content of HF and water. The structures, morphologies and optical properties of TiO₂ nanowires were characterized by SEM, XRD, UV–vis and PL. It was found that the nanowires originally grew from the splitting of TiO₂ nanotubes. The gas phase photocatalytic activities were investigated by photodegradation of gaseous toluene under UV irradiation, and irregular TiO₂ nanowires showed the best photocatalytic ability.     

Electroanalytical Determination of Cadmium(II) and Lead(II) Using an Antimony Nanoparticle Modified Boron‐Doped Diamond Electrode

We report the simultaneous electroanalytical determination of Pb²⁺ and Cd²⁺ by linear sweep anodic stripping voltammetry (LSASV) using an antimony nanoparticle modified boron doped diamond (Sb‐BDD) electrode. Sb deposition was performed in situ with the analytes, from a solution of 1 mg L^?1 SbCl₃ in 0.1 M HCl (pH 1). Pb²⁺ inhibited the detection of Cd²⁺ during simultaneous additions at the bare BDD electrode, whereas in the presence of antimony, both peaks were readily discernable and quantifiable over the linear range 50–500 μg L^?1.     

Development of direct fluorination technology for application to materials for lithium battery

Direct fluorination of 1,3-dioxolan-2-one with elemental fluorine was successfully carried out to provide 4-fluoro-1,3-dioxolan-2-one, which was expected as an additive for lithium ion secondary battery. 4-Fluoro-1,3-dioxolan-2-one was also further fluorinated with elemental fluorine to give three isomers of difluoro derivatives by the same methodology. Another topic is the preparation of trifluoromethanesulfonyl fluoride, an intermediate of lithium battery electrolyte, by the reaction of methanesulfonyl fluoride with elemental fluorine. The use of perfluoro-2-methylpentane as a solvent gave satisfactory selectivity of trifluoromethanesulfonyl fluoride.     

DNA在纳米金标上的组装、杂交、检测与银增强

利用电化学方法进行DNA的杂交检测.将目标ss-DNA固定在玻碳电极表面, 使其与纳米金标记的互补DNA发生杂化反应, 通过银增强试剂（该种试剂可以使银在纳米金表面沉积, 达到信号增强的效果）在纳米金上沉积银, 形成银包金的核壳结构.在酸性介质中沉积的银被氧化释放, 以离子状态存在于溶液中.用阳极溶出伏安法(ASV)检测银离子从而达到间接检测目标DNA的目的.测定结果表明，ss-DNA的浓度在100～1 000 pmol•L－1 范围内有非常好的线性关系, 检测限为10 pmol•L－1.     

贫水电解质体系制备多孔阳极氧化铝模板的研究

在有机溶剂为主的含草酸电解质中,研究了大孔径有序度高的阳极氧化铝(AAO)的一步法电化学制备.实验证实,电解质中水含量的降低能够有效抑制铝的电氧化速率和溶解速率,使得其氧化膜孔道的生长能够稳定进行,所得到的六方孔道排列有序度明显高于纯水溶剂制备的电解质体系下的产物.考察了水含量、有机溶剂种类以及电解质浓度对AAO模板孔道形貌的影响.结果表明,有机溶剂贫水电解质体系使得电氧化电压的选取范围比水溶液电解质体系更宽,孔径连续可调,反应条件温和.该方法适合于制备均匀大孔径的AAO模板.     

Antimony Film Electrode Prepared In Situ in Hydrogen Potassium Tartrate in Anodic Stripping Voltammetric Trace Detection of Cd(II), Pb(II), Zn(II), Tl(I), In(III) and Cu(II)

An antimony film electrode (SbFE) was prepared in situ on a glassy carbon support and in a new supporting electrolyte, a saturated solution of hydrogen potassium tartrate in which Sb(III) ions were complexed using tartrate. Its performance in anodic stripping voltammetric (ASV) determination of Cd(II), Pb(II), Zn(II), Tl(I), In(III) and Cu(II) traces was examined. It was found that 1.2 mg/L of Sb(III) yields the finest quality SbFE for analytical purposes. The procedure with in situ SbFE ensures well‐defined anodic stripping voltammetric curves of the investigated elements, low detection limits (0.5–3.8 µg/L), good reproducibility (1–5 %) and satisfactory sensitivity (32–184 nA/(µg/L)).     

Determination of arsenate in natural pH seawater using a manganese-coated gold microwire electrode

Direct electrochemical determination of arsenate (As^V) in neutral pH waters is considered impossible due to electro-inactivity of As^V. As^III on the other hand is readily plated as As⁰ on a gold electrode and quantified by anodic stripping voltammetry (ASV). We found that the reduction of As^V to As^III was mediated by elemental Mn on the electrode surface in a novel redox couple in which 2 electrons are exchanged causing the Mn to be oxidised to Mn^II. Advantage is taken of this redox couple to enable for the first time the electrochemical determination of As^V in natural waters of neutral pH including seawater by ASV using a manganese-coated gold microwire electrode. Thereto Mn is added to excess (∼1 μM Mn) to the water leading to a Mn coating during the deposition of As on the electrode at a deposition potential of −1.3 V. Deposition of As⁰ from dissolved As^V caused elemental Mn to be re-oxidised to Mn^II in a 1:1 molar ratio providing evidence for the reaction mechanism. The deposited As^V is subsequently quantified using an ASV scan. As^III interferes and should be quantified separately at a more positive deposition potential of −0.9 V. Combined inorganic As is quantified after oxidation of As^III to As^V using hypochlorite. The microwire electrode was vibrated during the deposition step to improve the sensitivity. The detection limit was 0.2 nM As^V using a deposition time of 180 s.