Relation between interfacial shear strength and compressive strength of carbon fiber/epoxy resin composite strands

The mechanism with which the fiber-matrix interfacial strength exerts its influence on the compressive strength of fiber reinforced composites has been studied by measuring the axial compressive strength of carbon fiber/epoxy resin unidirectional composite strands having different levels of interfacial shear strength. The composite strands are used for experiments in order to investigate the compressive strength which is not affected by the delamination taking place at a weak interlayer of the laminated composites. The interfacial strength is varied by applying various degrees of liquid-phase surface treatment to the fibers. The efficiency of the compressive strength of the fibers utilized in the strength of the composite strands is estimated by measuring the compressive strength of the single carbon filaments with a micro-compression test. The compressive strength of the composite strands does not increase monotonically with increasing interfacial shear strength but showes lower values at higher interfacial shear strengths. With increasing interfacial shear strength, the suppression of the interfacial failure in the misaligned fiber region increases the compressive strength, while at higher interfacial shear strengths, the enhancement of the crack sensitivity decreases the compressive strength.     

共振二胺结构的鳌合树脂对铂、钯把吸附性的研究

具有共振二胺结构的螯合树脂,在pH1—2时能对铂、钯离子进行定量吸附,而且在Fe,Cu,Ni,Zn,Cd离子共存下有很好的选择性,该树脂吸附Pt,Pd的容量分别为374.3毫克/克、233.4毫克/克.从树脂含氮量分析及螯合容量算得螯合比均为2:1     

环氧改性水性聚氨酯乳液的制备及其膜性能

以聚己内酯二元醇(CAPA)为软段,异佛尔酮二异氰酸酯(IPDI)和六亚甲基二异氰酸酯(HDI)为硬段,环氧树脂E-44为大分子交联剂,经相转化法合成了一系列环氧树脂改性负离子水性聚氨酯(EPPU)自乳化乳液,并制备了改性水性聚氨酯的固化膜.通过FTIR、TGA及接触角、力学性能测试对聚合物结构及其膜性能进行了研究.通过原子力显微镜(AFM)观察膜表面形态和表面粗糙度.乳液粒径及粒径分布通过动态激光光散射法(DLLS)测定.FTIR分析表明环氧树脂的羟基和环氧基都参与了发应.TGA表明,环氧树脂的加入可以提高聚氨酯的热稳定性.随着w(E-44)增大,改性聚氨酯膜的拉伸强度得到改善,断裂伸长率减小.随着w(E-44)增大,乳液粒径增大,薄膜的接触角增大,改性后的PU膜表面光滑度下降,拒水性增强.     

电感耦合等离子体质谱(ICP-MS)法测定土壤中的碘

通过电感耦合等离子体质谱法(ICP-MS)测定土壤中的碘。样品预处理采用艾斯卡试剂熔融、热水提取和阳离子树脂静态交换,试验加入了不同剂量的阳离子交换树脂在不同程度上降低了溶液中Na+ 和Zn2+^{等阳离子的盐效应干扰。研究了乙醇在}ICP-MS中对碘元素的增强效应,用3%的氨水溶液清洗进样系统,有效减少的碘的记忆效应和清洗时间。该方法线性范围宽,方法灵敏度高,检出限低,试剂用量少,环境友好。对苏州及周边区域若干非污染土壤点位进行采样、制备和测试,碘平均含量为2.7μg.g_-1^;同步测试国家有证标准物质,精密度和准确度良好。     

磁性功能化酚醛树脂的合成及对金属离子的吸附性能

磁性功能化酚醛树脂的合成及对金属离子的吸附性能;环氧酚醛树脂;螯合;金属离子;溶胀;吸附容量;吸附动力学     

SYNTHESIS, STRUCTURE AND PROPERTIES OF INTERPENETRATING SULFONIC ACID RESINS WITH HIGH CAPACITY

Two series of interpenetrating sulfonic acid resins (ISAR), 10×n and n×10, were prepared by means of the wet method, and the physicochemical, thermodynamic and kinetic properties of the ISAR were measured. The results show: 10×n resins exhibit better properties than n×10 ones, mainly in higher apparent degree of crosslinking and larger conformational entropy effect, among which, 10×1 resin exhibits the best thermodynamic and kinetic properties. In the DTA graphs of n×10 resins, there are two T_g and two T_(ox), but in those of 10×n, only one T_g and one T_(ox). This result well supports the conclusion that 10×n resins have much better interpenetrating structural aspects.     

大孔树脂-高速逆流色谱分离纯化薇甘菊中的黄酮类化合物

该文建立了大孔树脂-高速逆流色谱分离薇甘菊中黄酮类物质的方法。分离条件为:采用大孔树脂AB-8,洗脱液为50%（v/v）乙醇水溶液,高速逆流色谱溶剂体系为正丁醇-乙酸-水（4：1：5,v/v）。从薇甘菊中分离到4种黄酮类物质:槲皮素-3-O-芸香糖苷（纯度90.2%）、山奈酚-3-O-芸香糖苷（纯度98.55%）、木犀草苷（纯度98.33%）和紫云英苷（纯度99.23%）。建立的大孔树脂-高速逆流色谱方法简单、高效,可扩展应用于从其他植物中分离黄酮类物质。     

阴离子对RhCl（CO）（TPPTS）2催化1—己烯氢甲酰化反应的影响

在烯烃氢甲酰化反应两相催化体系中,为提高催化剂活性及选择性,有采用外加无机盐的报道［１～３］．从这些文献可以看出,某些无机盐在反应中起到催化助剂的作用．我们曾经研究了硫酸钠及其它金属硫酸盐中的阳离子对反应的影响［４,５］．在引入这些阳离子的同时,还有...     

Two Thiourea-based Colorimetric Sensors for Anions: Structure and Binding Study

Two colorimetric thiourea-based chemsensors with two relatively rigid arms, 2A and 2B, were synthesized. Their binding abilities with halide anions, AcO^?, [Formula: See Text] were studied by UV-Vis spectroscopy in DMSO. The two sensors showed a notable selective color response to F^? anion from colorless to green-yellow in recognition. The structures of the two sensors and their binding behaviors are discussed. The association constants were calculated by nonlinear fittings of 1:1, 1:2 or 1:1 to 1:2.