Inorganic Elements in Mytilus galloprovincialis Shells: Geographic Traceability by Multivariate Analysis of ICP-MS Data

The international seafood trade is based on food safety, quality, sustainability, and traceability. Mussels are bio-accumulative sessile organisms that need regular control to guarantee their safe consumption. However, no well-established and validated methods exist to trace mussel origin, even if several attempts have been made over the years. Recently, an inorganic multi-elemental fingerprint coupled to multivariate statistics has increasingly been applied in food quality control. The mussel shell can be an excellent reservoir of foreign inorganic chemical species, allowing recording long-term environmental changes. The present work investigates the multi-elemental composition of mussel shells, including Al, Cu, Cr, Zn, Mn, Cd, Co, U, Ba, Ni, Pb, Mg, Sr, and Ca, determined by inductively-coupled plasma mass-spectrometry in Mytilus galloprovincialis collected along the Central Adriatic Coast (Marche Region, Italy) at 25 different sampling sites (18 farms and 7 natural banks) located in seven areas. The experimental data, coupled with chemometric approaches (principal components analysis and linear discriminant analysis), were used to create a statistical model able to discriminate samples as a function of their production site. The LDA model is suitable for achieving a correct assignment of >90% of individuals sampled to their respective harvesting locations and for being applied to counteract fraud.     

A Metabolomic Approach to Beer Characterization

The consumers’ interest towards beer consumption has been on the rise during the past decade: new approaches and ingredients get tested, expanding the traditional recipe for brewing beer. As a consequence, the field of “beeromics” has also been constantly growing, as well as the demand for quick and exhaustive analytical methods. In this study, we propose a combination of nuclear magnetic resonance (NMR) spectroscopy and chemometrics to characterize beer. ¹H-NMR spectra were collected and then analyzed using chemometric tools. An interval-based approach was applied to extract chemical features from the spectra to build a dataset of resolved relative concentrations. One aim of this work was to compare the results obtained using the full spectrum and the resolved approach: with a reasonable amount of time needed to obtain the resolved dataset, we show that the resolved information is comparable with the full spectrum information, but interpretability is greatly improved.     

Development of a Wine Metabolomics Approach for the Authenticity Assessment of Selected Greek Red Wines

Wine metabolomics constitutes a powerful discipline towards wine authenticity assessment through the simultaneous exploration of multiple classes of compounds in the wine matrix. Over the last decades, wines from autochthonous Greek grape varieties have become increasingly popular among wine connoisseurs, attracting great interest for their authentication and chemical characterization. In this work, 46 red wine samples from Agiorgitiko and Xinomavro grape varieties were collected from wineries in two important winemaking regions of Greece during two consecutive vintages and analyzed using ultra-high performance liquid chromatography-quadrupole time-of-flight mass spectrometry (UHPLC-QToF-MS). A targeted metabolomics methodology was developed, including the determination and quantification of 28 phenolic compounds from different classes (hydroxycinnamic acids, hydroxybenzoic acids, stilbenes and flavonoids). Moreover, 86 compounds were detected and tentatively identified via a robust suspect screening workflow using an in-house database of 420 wine related compounds. Supervised chemometric techniques were employed to build an accurate and robust model to discriminate between two varieties.     

Analytical Modelling of Electron-coupled Ion Transfers with Immobilized vs Soluble Redox Transducer at Thick Film-modified Electrodes

Analytical theoretical solutions are deduced for the current-potential response, concentration profiles and interfacial potentials of electron-coupled ion transfers in the cyclic voltammetry with thick film-modified electrodes. The theory covers a wide variety of possible situations, namely, the redox transducer can be either immobilized on the working electrode or freely diffusing in the organic film, and the ion transfer can be either simple or complicated by homogeneous chemical processes. A comparative and comprehensive study of each case is performed, establishing the key parameters that define the behaviour of the system, as well as guidelines to analyse its electrochemical signal.     

New solutions for charge distribution on conductor surface

In the paper, a problem of electrostatics for charge distribution on a conductor surface is analytically solved for three new particular cases of conducting surfaces with complicated shape and specified value of electrostatic potential. The exact analytical expressions for surface charge density for the bodies are obtained. All the solutions are represented in a clear view of 3D graphs. It is shown that the proposed method of electrostatic problem for conductors allows to obtain infinitely many numerical solutions for the problem but only several special cases can be solved analytically.     

Anisotropic compressive behavior of rigid PVC foam at strain rates up to 200 s−1

The elevated strain rate compressive response of closed-cell polyvinyl chloride (PVC) foam at various densities is investigated. Two loading directions, (i.e., parallel and perpendicular to foam rise direction) were considered to investigate structural anisotropy. The elevated strain rates tests (up to 200 s⁻¹) were performed using a customized drop tower device. Engineering stress/strain behavior, energy dissipation, and maximum stress capacity were obtained for each density and compared against each other. Except for the lowest density of 45 kg/m³, strain rate effects were clearly observed through increased compressive strength and plateau stress when loading in the foam rise direction. The strain rate effect is more evident at higher densities. However, no significant strain rate effect was observed when loading perpendicular to the foam rise direction. Scanning electron microscopy (SEM) analysis showed that plastic hinges are the primary deformation mechanism for PVC foam cells. An analytical model has been calibrated using the experimental results and successfully predicted the mechanical response of the foam. Shape anisotropy has been measured employing the SEM images. The analytical approach was also able to predict the foam's anisotropic mechanical response.     

北京大学分析化学系列小班阅读讨论课的教学实践

简介了北京大学化学与分子工程学院分析化学系列基础课(定量分析化学、仪器分析、中级分析化学)开展小班阅读讨论课教学的实践。     

化学计量学二阶校正方法结合高效液相色谱用于蜂蜜中10种酚酸类物质的快速定量分析

利用化学计量学二阶校正方法结合高效液相色谱对枣花蜜中10种酚酸类物质的快速定量分析进行了研究。首先通过验证样本研究了所建立模型的准确性。结果显示：10种酚酸类物质的线性相关系数（R）为0.9982~0.9999,平均回收率为97.6%~101.1%,说明所建立的模型稳定可靠。其次,通过模拟蜂蜜试验,确定了固相萃取柱的种类及操作条件（HLB柱,酸化水淋洗,甲醇洗脱）。最后,利用模拟蜂蜜得到的最优条件结合化学计量学二阶校正方法,测定了枣花蜜中10种酚酸类物质的含量,并测得其加标回收率为62.1%~93.8%,考虑到目标分析物的种类较多,且蜂蜜基质极为复杂,该结果基本满足要求。另外,还利用统计与品质因子验证了试验方法的可靠性,结果令人满意。该方法具有简单、快速等优点,可用于复杂基质中多种目标分析物的同时定量分析。     

An overview of emerging pollutants in air: Method of analysis and potential public health concern from human environmental exposure

Air pollutants are perhaps the largest cause of diseases and death in the world today. Increasing urbanization and industrialization have caused an increase in number of diverse forms and types of new pollutants, which are difficult to detect and characterize due to their stench behaviour and complex sources of production. Such pollutants have been called emerging pollutants (EPs) and their list is ever increasing. Therefore, the understanding of the method of analysis and health implication of (EPs) in air is critical to providing a more robust understanding of exposure routes, regulations and mitigation. EPs in air discussed in this study are not in any way exhaustive but limited to emerging VOCs (including acrylonitrile, 1−3-butadiene, chloroform, dichloromethane, ethylene oxides, formaldehyde, toluene, trichloroethylene, 1,4-Dioxane) and metals (arsenic, manganese, and vanadium), ultrafine particles, micro- and nano- plastics, engineered nanoparticles, diesel/black carbon and bioaerosols. Occurrence, detection and health implications of these EPs in air are still unfolding due to limited monitoring studies, lack of standard methodology and regulations. To address this knowledge gap, authors conducted an in-depth review of available information. Their spatial distribution, analytical methods and health implications are discussed including the novel coronavirus (COVID-19) as a potential EP in air. The study concluded with highlights of gaps in knowledge and suggestions to key areas for future research. This information is of general interest to environmental scientists and of specific interest to both health and sanitation workers and policymakers at private, government and international organizations.     

Analytical theory for ion transfer–electron transfer coupled reactions at redox layer–modified/thick film–modified electrodes

Electrodes modified by liquid films or plasticized polymeric membranes containing a redox species offer valuable alternatives for the study of ion transfers and bimolecular electron transfers at liquid–liquid interfaces with conventional electrode arrangements and stable interfaces. The ion-to-electron (or electron-to-electron) transducer affects the electrochemical signal, complicating the accurate analysis of experimental data. This can be reduced through the use of an electrode surface-attached redox species of well-defined electrochemical behaviour. As will be demonstrated, the voltammetry of these systems show significant deviations with respect to individual charge transfers, which must be considered for appropriate diagnosis and quantitative analysis. For this, a simple analytical theory is presented here, deducing mathematical expressions for the current–potential response, as well as for the potential difference at the two polarized interfaces, the surface excess of the redox species and the ion interfacial concentrations.