Synthesis of Amphoteric Surfactants via Esterification Process

This article describes the synthesis of a novel amphoteric surfactant through esterification of 2‐hydroxy‐N,N,N‐trimethylethanaminium chloride with maleic acid alkyl ester of C₈, C₁₀, and C₁₂ chain length in the presence of base. Maleic acid alkyl esters were synthesized by the reaction of maleic anhydride with alkyl alcohol. Surface‐active properties were studied by different techniques such as surface tension and foaming property. Critical micelle concentrations (CMCs) were found by using surface tension values to learn the effect of chain length on CMC of synthesized surfactants. The best result obtained has minimal coproducts, an environmentally safer route, and a very good CMC value of surfactants.     

Skin Constituents as Cosmetic Ingredients. Part II: A Study of Bio‐Mimetic Monoglycerides Behavior at the Squalene‐Water Interface by the “Pendant Drop” Method in a Dynamic Mode

This work aims at presenting the viscoelastic behavior of bio‐mimetic monoglycerides used as emulsifier in a mixture made of two non‐miscible liquids, squalene and water. The measurement of the interfacial tension, carried out by the “pendant drop” method in “dynamic” mode, made it possible to characterize these amphiphilic molecules according to the value of their elastic modulus, ?, as well as their relaxation time, τ_R.

The analysis of these parameters, as well as those developed in the previous publication [L. Blasco et al. (2006) Skin constituents as cosmetic ingredients. Part I: A Study of bio‐mimetic monoglyceride behavior at the squalene‐water interface by the “pendant drop” method in a static mode. J. Dispers. Sci. Technol., 27(6).] shows that the hydrocarbon chain structure, such as its length, the presence of one or more unsaturations, hydroxyl function, affects the behavior of surfactant molecules at the squalene/water interface.     

Adsorption of Nonionic Surfactant from Its Aqueous Solution onto Commercial Rubber

Adsorption of Ethoxylated Nonyl Phenol (ENP) surfactant from its aqueous solution onto a commercial tire cutting from different sites. Outer Peristalitic (O.P.), Outer Smouth (O.S.), and Internal Tire (I.T.) is studied after different immersion times, 24, 48, 72, and 144 hrs at 30° C. The adsorption isotherms are determined by a surface tension method. A two stepped L-type isotherm is characteristic below the CMC of ENP; above this concentration the isotherm deviates from the L-type and the slope of the isotherm increases sharply. A Langmuir fit has been found below the CMC of ENP. From the maximum amounts adsorbed at pseudo-plateau (T_max of the tested samples it was found that the efficiency of adsorption onto the rubber surface decreases in the order, O.P. > O.S. > I.T.     

悬浮聚合制备大尺寸梭形聚苯乙烯粒子新方法及机理研究

利用氢氧化钾对苯乙烯-马来酸酐交替共聚物(SMA)进行水解,所得中等皂化程度的SMA水解产物(SMAA)在水溶液中具有刚性棒状直链构型;将此特殊结构的大分子作为分散剂用于苯乙烯悬浮聚合,通过控制搅拌速度和油水比,可得到梭形聚苯乙烯粒子;在优化条件下,粒子平均长度6.8 mm,宽度1.4 mm,厚度0.5 mm,长径比约5.0.其可能的机理为,中等皂化程度的刚棒直链型SMAA在聚合物"软粒子"表面能形成难以"回复"的有效保护层,使由剪切形成的变形聚合物"软粒子"在聚合过程中能保持形状和尺寸的稳定,从而得到梭形聚合物粒子.     

Effect of Experimental Variables on the Combustion Characteristics of Water-in-Diesel Emulsion Fuels

Water-in-diesel (W/D) emulsion fuels were prepared through an ultrasonic processor by using high energy emulsification method. Accordingly, the physical and chemical properties were analyzed. A decrease in viscosity was found in the emulsion fuel in contrast to the neat diesel which signifies the enhanced fluidity of the fuel. The emulsion fuel was then used to carry combustion tests in an internal combustion engine. A decrease in exhaust temperature was observed when a high surfactant to water ratio was used, which lead to minimal heat loss. As water is emulsified with diesel, effectiveness of combustion is improved rather than neat diesel fuel. It was also explored that the addition of water-in-diesel is influential in terms of reduction in exhaust gas emission such as carbon dioxide, carbon monoxide, ammonia from the internal combustion engine. Therefore, this type of emulsion fuel would be a useful contribution in the fuel economy, but also in making it environmentally friendly since diesel fuel is now considered one of the leading fuels causing ecological contamination.     

Adsorption and Corrosion Inhibition Behavior of Schiff Base-Based Cationic Gemini Surfactant on Mild Steel in Formic Acid

The adsorption and corrosion inhibition behavior of synthesized Schiff base-based cationic gemini surfactant bis[p-(N,N,N-tetradecyldimethylammonium bromide)benzylidene]thiourea (14-S-14) on mild steel in 20% formic acid in the temperature range of 30°C to 60°C was evaluated using weight loss measurements, solvent analysis of iron ions and potentiodynamic polarization measurements. The synthesized inhibitor was characterized using Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR), and thin layer chromatography (TLC). The surface morphology of the corroded mild steel specimen was evaluated using scanning electron microscopy (SEM), energy dispersive x-ray analysis (EDAX), and atomic force microscopy (AFM). Thermodynamic/kinetic parameters were calculated to elaborate the adsorption and corrosion inhibition mechanism of the inhibitor. The inhibition efficiency of the compound was found to vary with inhibitor concentration, immersion time, and temperature. The adsorption of the compound on the steel surface was found to obey Langmuir adsorption isotherm.      

Different Distributions of Counterions in the Surface Layer of Cationic Surfactant Solutions

We have separately determined the surface tension of pure aqueous solutions of cetyltrimethylammonium chloride and cetyltrimethylammonium bromide and their surface potentials by a Kelvin probe system. With the help of Gibbs equation, the surface excess has been determined through approximating the chemical activity of the surfactant by their dilute bulk concentration. In the following, the surface potential—surface excess isotherms were established. Those potential isotherms evidence that cetyltrimethylammonium chloride solution has a higher value compared to that of cetyltrimethylammonium bromide under equal surface excess. This phenomenon is supposed to be owed to the different distributions of chloride and bromide ions within the adsorption layer of the solutions, which can be attributed to the different properties of those two anions.     

Dynamic Interfacial Behavior of Poly(oxyethylene) Lauryl Ether Based Surfactant Mixtures

The adsorption behavior of binary mixtures comprising nonionic surfactants at the air–water interface has been studied by bubble pressure tensiometry at concentrations above and below their critical micelle concentrations. Surfactants with the same hydrocarbon chains but different degree of ethoxylations were chosen as the components to understand their mixing behavior at equilibrium and dynamic conditions. At short times, the adsorption is found to be diffusion limited for individual components as well as for the mixtures, as predicted by the Ward and Tordai model. The effective diffusion coefficient of the monomers in the mixed state displays a dynamic synergism, consistent with the molecular thermodynamic model for dynamic surface tension. However, the equilibrium surface tension and micellar diffusion coefficient of the mixtures exhibit ideal behavior.     

表面活性剂修饰ZnIn2S4光催化甲苯选择性氧化

采用溶剂热合成法,借助十六烷基三甲基溴化铵（CTAB）和十八烷基三甲基溴化铵 （STAB）的修饰合成了富含硫缺陷的ZnIn2S4-CTAB和ZnIn2S4-STAB光催化剂. 通过透射电镜、X射线衍射、紫外可见漫反射光谱、电子顺磁共振和光电化学性能测试对所有样品进行了表征,并通过光催化甲苯氧化反应测试样品的催化活性. 活性结果表明ZnIn2S4-CTAB和ZnIn2S4-STAB上甲苯转化速率分别达到795 μmol gcat-1 h-1和1053 μmol gcat-1 h-1,是未修饰ZnIn2S4-Blank催化剂的4倍和5倍,同时目标产物苯甲醛选择性均大于92%. 机理研究发现,表面活性剂修饰后的ZnIn2S4-CTAB和ZnIn2S4-STAB较ZnIn2S4-Blank,具有更高浓度的硫缺陷. 硫缺陷通过捕获电子促进了光生载流子的分离与利用,显著提高了ZnIn2S4-CTAB和ZnIn2S4-STAB的光催化甲苯选择性氧化制苯甲醛活性.