PSt-b-PEO增容PA6/PS共混体系的研究

采用动态力学方法（ＤＭＡ），形态学方法（ＳＥＭ），研究了ＰＳｔ ｂ ＰＥＯ存在下尼龙６（ＰＡ６）／聚苯乙烯（ＰＳ）共混体系的相容性．研究表明，ＰＡ６和ＰＳ的简单共混体系，分散相相畴尺寸大，相界面清晰，断裂面光滑，呈脆性断裂，相容性极差，属不相容体系．而加入少量ＰＳｔ ｂ ＰＥＯ后分散相尺寸变小，界面层变厚，界面粘结力增强，表现出韧性特征．     

Surface characterization of macroporous glycidyl methacrylate based copolymers by inverse gas chromatography

Two samples of macroporous crosslinked poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate), PGME, with different porosity parameters were synthesized by suspension copolymerization and modified by ring-opening reaction of the pendant epoxy groups with ethylene diamine, EDA. Inverse gas chromatography at infinite dilution was used for the determination of adsorption properties of PGME, and copolymer modified with ethylene diamine, PGME-en. Thermodynamic parameters of adsorption, dispersive components of the surface free energies, and the acid/base constants for the copolymer samples were calculated. The calculated dispersive surface energy values, , for PGME and PGME-en are comparable with the literature data for nonconductive polymers.     

Synthesis of zwitterionic block copolymers via RAFT polymerization

A series of poly [2-(dimethylamino)ethyl methacrylate (DMA)-sodium acrylate (SA)] diblock copolymers were synthesized using reversible addition-fragmentation chain transfer (RAFT) polymerization. The polymerization exhibits controlled characters: well-controlled molecular weight, narrow molecular weight distribution, molecular weight increasing with polymerization time. The zwitterionic diblock copolymers show rich solution behaviors. Dynamic light scattering (DLS) indicated the formation of micelles and reverse micelles of copolymers is affected by net charge density of copolymers. Microcalorimetry studies showed that the lower critical solution temperature (LCST) increases with incorporation of hydrophilic segments in buffer.     

Graft copolymer of polymethyl methacrylate-g-polycarbonate urethane and the fully gelled grafted networks

We have synthesized and characterized the graft copolymer of polymethyl methacrylate (PMMA)-graft-polycarbonate urethane (PCU) (designated PMMA-g-PCU) and the fully gelled mutually crosslinked network composed of both PMMA and PCU (designated as PMMA-PCU-N). Unlike the previously synthesized one phase PCU/PMMA simultaneous interpenetrating polymer networks (IPN's), both of these new materials exhibited two distinct T_g's (from DSC and DMA studies) at all compositions which we have studied. The two-phase nature of the graft and network polymer was confirmed by TEM with domain sizes smaller than those found in the blends of the linear PCU and PMMA chains. In comparison with the corresponding IPN's, the PMMA-g-PCU and the PMMA-PCU-N were thermally less stable and had a lower ultimate strength. © 1992 John Wiley & Sons, Inc.     

Properties of block and graft copolymers of polybutadiene with small complexed poly(4-vinylpyridine) segments

Various diblocks, triblocks and a graft copolymer of butadiene with 4-vinylpyridine short blocks have been prepared. They were complexed with ZnCl₂ to give ionomer-like materials. For all copolymers, the T_g of the elastomeric block (?84°C to ?91°C) was unchanged by complexation. For all diblocks and triblocks with short blocks (DP _n ～ 3) the storage modulus was only slightly increased by comparison with uncomplexed materials. For the graft copolymer even with short blocks the material is less sensitive to temperature after complexation. For triblocks, when the DP _n of the vinylpyridine blocks was high enough (15 units), complexes were associated in multiplets of large size and the elastomeric properties were retained up to 200°C.     

SBS与甲基丙烯酸丁酯本体接枝反应的研究

本文研究了以过氧化苯甲酰(BPO)为引发剂,甲基丙烯酸丁酯(BMA)既作溶剂又作为单体与苯乙烯-丁二烯嵌段共聚物(SBS)进行接枝共聚反应。用红外光谱、核磁共振谱及透射电镜表征了接枝共聚物(SBS-g-BMA)的组成及结构,讨论了时间、温度及SBS和BPO的用量对接枝的影响。     

Grafting of maleic anhydride to hydrocarbons below the ceiling temperature

Maleic anhydride has been grafted to eicosane and squalane at 60–80°C using 1,2-dichlorobenzene as solvent and benzoyl peroxide as initiator. These hydrocarbons are low molecular weight models for hydrocarbon polymers containing secondary and tertiary hydrogen atoms. In the absence of the hydrocarbon and with monomer concentrations of the order of 1M, low molecular weight poly(maleic anhydride) is formed. On addition of the hydrocarbon, the main product is grafted material and very little homopolymer is formed. The grafts consist primarily of single succinic anhydride units but some of them are short poly(maleic anhydride) chains. Ceiling temperature considerations control the formation of homopolymer in the absence of hydrocarbon substrate. In the presence of eicosane or squalane, initiation of grafting proceeds by hydrogen abstraction from the hydrocarbon. The main factor controlling graft length is then the ratio of the rates of intramolecular hydrogen abstraction and of monomer addition to succinic anhydride radicals © 1995 John Wiley & Sons, Inc.     

Highly hydrophobically modified polyelectrolytes: Field variables to control emulsion type

Highly hydrophobically modified (with n-dodecylamide chain) linear poly(acrylic acid)s (HHMPAAH) and poly(sodium acrylate)s (HHMPAANa) with various degrees of grafting (τ) were synthesized and used as emulsifiers of the n-dodecane/water system. The type of emulsion, oil in water (O/W) or water in oil (W/O), was investigated as a function of the polymer chemical structure (τ, salt or acid form of the copolymer) and aqueous phase electrolyte concentration (NaNO₃). Increasing τ and/or salt concentration was found to favor the formation of inverse emulsions. Direct liquid–liquid dispersions are more likely to form with poly(sodium acrylate)s than with poly(acrylic acid)s. Hence, field variables such as τ, pH and ionic strength are relevant parameters to control emulsion type. Moreover, a balanced polyelectrolyte neither soluble in oil nor in water was synthesized for the first time. With this original emulsifier, the dispersion type was found to change from O/W to W/O with polymer salting out. The work provides convenient model system for fundamental studies of polymer conformation at liquid–liquid interfaces. Received: 31 March 1998 Accepted: 30 April 1998     

双亲半柔性两嵌段共聚物在溶液中自组装形态的模拟退火研究

针对一系列疏溶剂嵌段与溶剂间的相互作用,用模拟退火方法研究了双亲半柔性两嵌段共聚物在溶液中的自组装形态.模拟结果显示共聚物在溶液中均形成核-壳聚集体,其中疏溶剂嵌段形成聚集体的核,亲溶剂嵌段形成聚集体的壳.当上述相互作用较小时,核呈球形,而壳如同长在核上的刺.随着上述相互作用的增大,核逐渐增大.在较大的相互作用时,核呈柱形;而随着相互作用的加大,长在核上的刺逐渐伏贴于核表面.在更大的相互作用时,核又呈球状,壳伏贴于核表面.     

Quantitative aspects of gradient HPLC of copolymers from styrene and ethyl methacrylate

Summary Prerequisite of quantitative evaluation in chromatography is equivalence of sample composition and detector signal. This includes complete retention and proper elution of all sample constituents. In polymer HPLC, complete retention requires a poor starting eluent, a sufficiently active column, and a low ratio of injection volume to column volume. On small pore columns, insufficient retention caused the polymer to elute either in the interstitial volume (sample exclusion), together with the sample solvent, or immediately after the solvent plug.Stat-copoly(styrene/ethyl methacrylate) samples are more difficultly retained thanstat-copoly(styrene/acrylonitrile) specimes. With the former copolymer it could be shown that incomplete retention did not cause sample demixing. In order to gain complete retention, non-exclusion HPLC of polymers should be performed with columns whose solvent volume is at least 50 times as large as the injection volume. This consequence is of practical importance in chromatographic cross-fractionation where rather large volumes of SEC eluate are injected into the apparatus for gradient HPLC.