Vibrational Spectroscopic Study on Ion Solvation and Association of Lithium Perchlorate in 4-Methoxymethyl-ethylene Carbonate

Solvation interaction and ion association in solutions of lithium perchlorate/4-methoxymethyl-ethylene carbonate （MEC） have been studied by using Infrared and Raman spectra as a function of concentration of lithium perchlorate. The splitting of ring deformation band and ring ether asymmetric stretching band, and the change of carbonyl stretching band suggest that there should be a strong interaction between Li^＋ and the solvent molecules, and the site of solvation should be the oxygen atom of carbonyl group. The apparent solvation number of Li^＋ was calculated by using band fitting technique. The solvation number was decreased from 3.3 to 1.1 with increasing the concentration of LiClO4/MEC solutions. On the other hand, the band fitting for the ClO4^- band revealed the presence of contact ion pair, and free ClO4^- anion in the concentrated solutions.     

用T-jump/FTIR研究MnCP、NiCP和PbCP的快速热分解(英)

0IntroductionCarbohydrazideisahydrazinederivativewithwhitecrystalofstrongreducingbehaviors.Becauseithasmanycoordinationatoms(fournitrogenatomsandoneoxygenatom),carbohydrazidecan,therefore,beusedasmultidentateligand.Itscoordinationcom鄄poundiswidelyusedint…     

Preparation and characterization of spherical V2O3 nanopowder

V₂O₃ nanopowder with spherical particles was prepared by reducing pyrolysis of the precursor, (NH₄)₅[(VO)₆(CO₃)₄(OH)₉]·10H₂O, in H₂ atmosphere. The thermolysis process of the precursor in a H₂ flow was investigated by thermogravimetric analysis and differential thermal analysis. The results indicate that pure V₂O₃ forms at 620°C and crystallizes at 730°C. The effects of various reductive pyrolysis conditions on compositions of V₂O₃ products were studied. Scanning electron micrographs show that the particles of the V₂O₃ powder obtained at 650°C for 1 h are spherical about 30 nm in size with more homogeneous distribution. Experiments show that nanopowder has larger adsorption capacity to gases and is more easily reoxidized by air at room temperature than micropowder. Differential scanning calorimetry experiment indicates that the temperature of phase transition of nano-V₂O₃ powder is −119.5°C on cooling or −99.2°C on heating. The transition heats are −12.55 J g⁻¹ on cooling and 11.42 J g⁻¹ on heating, respectively.     

Establishment of traceability of ammonium nitrogen determination in wastewater

A case study is presented for the establishment of traceability for ammonium nitrogen determination in wastewater in a routine laboratory in order to fulfil the requirements of ISO/IEC standard 17025. The necessary relevant information was obtained from the method validation data, the quality control data and equipment calibration certificates. The method of measurement is described together with the measurement equation, selected traceable reference standards and the associated measurement uncertainty. The major sources of uncertainty of the result of measurement were identified and the combined uncertainty was calculated. Identification of the main uncertainty sources represents the basis for target operations for reducing the measurement uncertainty of this determination.     

Use of mobile phase 18-crown-6 to improve peak resolution between mono- and divalent metal and amine cations in ion chromatography

It is difficult to quantify NH4+ by ion chromatography in the presence of high concentrations of Na+ due to peak overlap. The Dionex IonPac CS15 column, which contains phosphonate, carboxylate, and 18-crown-6 functional groups, was originally developed to overcome this problem. We have found that the addition of 18-crown-6 to the eluent promotes improved peak resolution between Na+ and NH4+ even at concentrations as high as 60,000 to 1 using this column. Its use also improves the separation of alkali and alkaline earth metal and amine cations. Mobile phase 18-crown-6 increased the retention times of CH3NH3+, NH4+, and K+, and decreased the retention time of Sr2+. The retention times of Li+, Na+, Mg2+, Ca2+, (CH3)2NH2+, and (CH3)3NH+ were not affected. This method makes possible the direct analysis of ammonia from nitrogenase, the enzyme responsible for biological nitrogen fixation. The resolution of the NH4+ peak from the Na+ and Mg2+ peaks improved from zero resolution to values of 6.19 and 5.65, respectively. This technique considerably reduces the analysis time of NH4+ in the presence of high concentrations of Mg2+ and Na+ over traditional indophenol measurements.     

A new, efficient, and simple method for the synthesis of thiiranes from epoxides under solvent-free conditions

A simple, efficient, and new method has been developed for the synthesis of thiiranes from epoxides through a one-pot reaction of epoxides with diethyl phosphite in the presence of ammonium acetate or ammonium hydrogen carbonate/sulfur/ and acidic alumina under solvent-free conditions using microwave irradiation.     

f-Element/crown ether complexes: 21. Conformational changes in metal complexed versus hydrogen bonded benzo-15-crown-5 in the structure of [Y(OH2)3(NCMe)-(benzo-15-crown-5)][ClO4]3·benzo-15-crown-5·CH3CN

Crystalline [Y(OH₂)₃(NCMe)(benzo-15-crown-5)][ClO₄]₃·benzo-15-crown-5-CH₃CN can be obtained by slowly cooling a reaction mixture of Y(ClO₄)₃·n H₂O with benzo-15-crown-5 in a solution of acetonitrile and methanol (3 : 1) from 60°C to room temperature. The crystal structure of this complex has been determined at –150 and 20°C. The complex is triclinic,P . At –150°C the cell parameters area = 11.986(4),b = 12.071(7),c = 16.364(5) Å, = 93.56(3), = 98.68(3), = 109.68(4)°, vol = 2187 ų, andD _calc = 1.61 g cm^–3 forZ = 2 formula units. 3633 independently observed [F _o 5(F _o)] reflections were used in the final least-squares refinement leading to an agreement index ofR = 0.048. The Y(III) ion coordination geometry approximates a tricapped trigonal prism with three water molecules and three benzo-15-crown-5 oxygen atoms forming the prism, with the two remaining benzo-15-crown-5 oxygen atoms and the acetonitrile molecule completing the coordination as capping atoms. The three water molecules hydrogen bond a second crown ether molecule and two of the perchlorate anions. The two acetonitrile molecules have contacts with perchlorate oxygen atoms close enough for some weak interaction. One perchlorate is ordered, one is partially disordered as is the coordinated solvent molecule, and the third anion is totally disordered. The two unique crown ether molecules have distinctively different conformations.For Part 20, see reference [1].     

Hydrothermal synthesis, structural characterization and magnetic studies of the new pillared microporous ammonium Fe(III) carboxyethylphosphonate: [NH4][Fe2(OH){O3P(CH2)2CO2}2]

The preparation by hydrothermal reaction and the crystal structure of the iron(III) carboxyethylphosphonate of formula [NH₄][Fe₂(OH){O₃P(CH₂)₂CO₂}₂] is reported. The green-yellow compound crystallizes in the monoclinic system, space group Pc(n.7), with the following unit-cell parameters: a=7.193(3) Å, b=9.776(3) Å, c=10.17(4) Å and β=94.3(2)°. It shows a typical layered hybrid organic-inorganic structure featuring an alternation of organic and inorganic layers along the a-axis of the unit cell. The bifunctional ligand [O₃P(CH₂)₂CO₂]³⁻ is deprotonated and acts as a linker between adjacent inorganic layers, to form pillars along the a-axis. The inorganic layers are made up of dinuclear Fe(III) units, formed by coordination of the metal ions with the oxygen atoms originating from the [O₃P−]²⁻ end of the carboxyethylphosphonate molecules, the oxygen atoms of the [−CO₂]⁻ end group of a ligand belonging to the adjacent layer and the oxygen atom of the bridged OH group. Each Fe(III) ion is six-coordinated in a very distorted octahedral environment. Within the dimer the Fe-Fe separation is found to be 3.5 Å, and the angle inside the [Fe(1)-O(11)-Fe(2)] dimers is ∼124°. The resulting 3D framework contains micropores delimited by four adjacent dimers in the (bc) planes of the unit cell. These holes develop along the a-direction as tunnel-like pores and [NH₄]⁺ cations are located there. The presence of the μ-hydroxo-bridged [Fe(1)-O(11)-Fe(2)] dimers in the lattice is also responsible for the magnetic behavior of the compound at low temperatures. The compound contains Fe³⁺ ions in the high-spin state and the two Fe(III) ions are antiferromagnetic coupled. The J/k value of −16.3 K is similar to those found for other μ-hydroxo-bridged Fe(III) dimeric systems having the same geometry.     

Facile and efficient synthesis of fluorinated fullerene-fused 1,3-dioxolanes: reaction of C60 with fluorinated aromatic aldehyde mediated by lithium perchlorate

A series of fluorinated fullerene-fused 1,3-dioxolanes have been facilely and efficiently synthesized in the presence of easily available LiClO₄·3H₂O. The influences of the number of fluoro-substituents and their positions linked to the phenyl ring on the isolated yield of fullerene-fused 1,3-dioxolanes have been studied in detail. Based on reaction facts, a possible reaction mechanism for the formation of fluorinated fullerene-fused 1,3-dioxolanes has been proposed. Furthermore, detailed ultraviolet absorption spectra, fluorescence emission spectra, and cyclic voltammogram further explain the optical properties and electronic transmission capabilities of the products.     

Electrochemical detection of nitrate,nitrite and ammonium for on-site water quality monitoring

This review examines the most recent electrochemical developments for nitrate, nitrite and ammonium detection for on-site water monitoring. There remains a high demand for effective field-based detection of the dissolved inorganic nitrogen (DIN) analytes to aid in mitigating nitrogen loading. Electrochemical approaches show increasing potential to fill this role as advancements in nanotechnology continually improve analytical performance and on-site applicability. However, translating these improvements into the field still faces the resonating challenges of reaching analytical proficiency (selectivity, sensitivity, robustness, stability), practical end-user functionality, minimal matrix interferences and cost effectiveness. Herein, we elaborate on these challenges via a critical evaluation of current studies and examine how realistic the prospects of on-site nitrate, nitrite and ammonium are. We also present recommendations in addressing these gaps to conclude the review.