The Direct Electrochemical Oxidation of Ammonia in Propylene Carbonate: A Generic Approach to Amperometric Gas Sensors

The direct electrochemical oxidation of ammonia in propylene carbonate is reported for the first time. The voltammetric responses at glassy carbon, boron‐doped diamond, edge and basal plane pyrolytic graphite electrodes are explored and compared with the outcome indicating that the optimum electrode substrate for analytical purposes in this solvent is glassy carbon. Proof‐of‐concept is shown for the amperometric detection of ammonia using basal plane pyrolytic graphite electrodes abrasively modified with glassy carbon spheres. Given the significantly lower vapor pressure of propylene carbonate in comparison to water the implications for extending the life‐time of practical sensors are evident. Propylene carbonate shows a wide potential window with glassy carbon electrodes permitting this approach to be used for a potential diversity of gaseous analytes.     

Growth inhibition in animal cell culture

Eight independent cell lines accumulated ammonia in culture to concentrations between 1.3 and 2.9 mM. The growth inhibition of such concentrations of ammonium chloride when added to culture medium was variable. The cell lines tested could be divided into 3 groups depending on their growth response to 2 mM added NH4Cl. In the first group (293, HDF, Vero, and PQXB1/2) little (less than 14%) or no growth inhibition occurred. In the second group (McCoy and MDCK) a reduction in final cell yield of 50-60% was observed. The third group (HeLa and BHK) was most sensitive to the effects of NH4Cl with growth inhibition (greater than 75%) compared to controls. The growth inhibitory effect of added lactate up to 20 mM was negligible (less than 10%) for 3 cell lines, although one cell line (PQXB1/2) showed greater sensitivity. The interactive effects of ammonia and lactate were determined in a matrix experiment. At lactate (greater than 12 mM) and ammonia (1-4 mM), the growth inhibitory effects of the two components were synergistic. However, at low concentrations of lactate (less than 12 mM) the toxic effect of ammonia was reduced. A proposed mechanism for the sparing effect of lactate on ammonia toxicity is discussed. This may have importance in developing strategies for the optimal growth of ammonia-sensitive cell lines.     

Uranium association with corroding carbon steel surfaces

We investigated the association of uranium with clean and corroded surfaces of 1010 carbon steel. Studying steel contaminated by uranium species will have an important effect on the development of methods used to clean radioactively contaminated metal waste. X‐ray photoelectron spectroscopy, synchrotron infrared microspectroscopy and laboratory‐based Fourier transform infrared analysis of steel surfaces exposed to uranyl nitrate showed the presence of crystallized hydrated uranyl oxides, uranyl hydroxides, iron oxyhydroxides and iron oxides. In general, heavily corroded areas physically shield the uranium species, which tended to associate spatially with hydroxyl groups and lepidocrocite. Lightly corroded areas contained uranium species with stronger axial U–O bonding. Infrared spectroscopy, Rutherford backscattering spectroscopy and energy‐dispersive spectroscopy mapping analysis revealed that the uranium species are well distributed within the upper micron of the thick corrosion layer and associated more with areas of high hydroxide content. Parameters such as the concentration of uranyl nitrate solution used to expose the carbon steel coupons, the method of contamination (dipped or sprayed with dilute uranyl nitrate solution) and the degree of corrosion (accelerated corrosion before and/or after contamination) played significant roles in the distribution and nature of the uranyl hydroxide/iron oxyhydroxide corrosion products found on the surface of all coupons. These factors must be considered in the development and optimization of decontamination processes for metal waste. Copyright © 2003 John Wiley & Sons, Ltd.     

Polypyrrole-based sensor for hydrazine and ammonia

An ultra-thin layer of polypyrrole can be coated on non-conducting substrates, e.g., acrylic, by dip coating into a colloidal suspension of polypyrrole. This thin coating reversibly combines with low concentrations of ammonia or hydrazine with a concomitant reversible increase in resistance; 0.1 μg cm^?3 of ammonia can readily be detected with a 1 cm² area of sensor.     

Ab initio and density functional theory studies on the mechanism of nucleophilic vinylic substitution of 4<Emphasis Type="Italic">H</Emphasis>-pyran-4-one and 2-methyl-4<Emphasis Type="Italic">H</Emphasis>-pyran-4-one with ammonia

 Nucleophilic vinylic substitutions of 4H-pyran-4-one and 2-methyl-4H-pyran-4-one with ammonia were calculated by the B3LYP method using the 6-31G(d,p) basis set. Bulk solvent effects of aqueous solution were estimated by the polarized continuum and Poisson–Boltzmann self-consistent reaction field models using the 6-311+G(d,p) basis set. In the gas phase different mechanisms were found for the two reaction systems calculated. The reaction of 4H-pyran-4-one proceeds through enol, whereas a feasible path for the less reactive 2-methyl-4H-pyran-4-one is the mechanism through a keto intermediate. Addition of ammonia in concert with proton transfer is the rate-determining step ofthe reaction. The mechanism proceeding either by a bimolecular nucleophilic substitution (S_N2) or by one involving a tetrahedral zwitterionic intermediate is shown to be unlikely in the gas phase or nonpolar solution. The effects of bulk solvent not only consist in a reduction of the various activation barriers by about 25–40 kJ mol⁻¹ but also in a change in the reaction mechanism. Received 26 May 2002 / Accepted 26 July 2002 / Published online: 14 February 2003     

van der Waals corrections to density functional theory calculations: Methane,ethane, ethylene,benzene, formaldehyde,ammonia, water,PBE, and CPMD

Parameters are developed for a practical application of the empirical van der Waals (vdW) correction infrastructure available in the CPMD density functional theory (DFT) code. The binding energy, geometry, and potential energy surface (PES) are examined for methane, ethane, ethylene, formaldehyde, ammonia, three benzene dimer geometries, and three benzene–water geometries. The vdW corrected results compare favorably with MP2 and CCSD(T) calculations near the complete basis set limits, and with experimental results where they are available.     

The first example of anodic corrosion of Pd in aqueous ethylenediamine with formation of colloidal palladium

For the first time, corrosion of a Pd anode was detected during electrolysis in a weakly alkaline aqueous solution of ethylenediamine. The kinetics and mechanism of the process were investigated by the methods of cyclic voltammetry and gravimetry. Scanning electron microscopy showed corrosion of the Pd anode and deposition of Pd on the cathode surface, while the formation of colloidal Pd in the working solution was identified by transmission electron microscopy.     

Novel test method to estimate bound rubber formation of silica-filled solution styrene-butadiene rubber compounds

Bound rubber formation was investigated in detail by applying various extraction temperatures (at room temperature, 90°C, and 180°C) and novel treatment methods (ammonia bubbling and sonication). Bound rubbers could be divided into three major components of core shell, primary layer including tightly primary layer and occluded rubber, and secondary layer including connecting filament. Bound rubber content of the core shell was measured by four successive procedures of extraction at room temperature, ammonia bubbling, extraction at 180°C and sonication. Bound rubber content of the tightly primary layer was measured by three successive procedures of extraction at 90°C, ammonia bubbling and sonication. Bound rubber content of the primary layer was measured by two successive procedures of extraction at 90°C and sonication.     

Coconut coir dust extract: a novel eco-friendly corrosion inhibitor for Al in HCl solutions

Abstract

Corrosion inhibition of aluminium in 1 M HCl by coconut coir dust extract (CCDE) was studied using weight loss and hydrogen evolution techniques at 30 and 60°C. It was found that the studied extract exhibits a very good performance as inhibitor for aluminium corrosion in 1 M HCl. Results show that the inhibition efficiency increases with increasing temperature and concentration of the extract. Inhibitive effect was afforded by adsorption of the extracts' components which was found to accord with Langmuir adsorption isotherm. Inhibition mechanism is deduced from the temperature dependence of the inhibition efficiency and was further corroborated by the values of activation parameters obtained from the experimental data.     

Polymer complexes. LXXVI. Synthesis,characterization, CT‐DNA binding,molecular docking and thermal studies of sulfoxine polymer complexes

Novel polymer complexes of 8‐hydroxyquinoline‐5‐sulfonic acid hydrate ( H ₂ L ) with Cu²⁺, Co²⁺ and Ni²⁺ chloride were prepared and characterized. Microanalysis, magnetic susceptibility, IR spectra, electron spin resonance, mass spectra, X‐ray, molar conductance, thermal, and UV–Vis spectra studies have been used to confirm the structure of the prepared polymer complexes. The molecular and electronic structures of the hydrogen bond conformers for ligand ( H ₂ L ) were optimized theoretically and the quantum chemical parameters were calculated. On the basis of elemental and IR data, the chemical structure of metal chelates commensurate that the tri‐dentate (H₂L) coordinate to metal chlorides through oxygen atom of phenolic OH and oxygen atom of SO₃‐H group by replacing H atoms and nitrogen of the quinoline ring. The magnetic studies suggested the octahedral geometrical structure for all produced polymer complexes with general formula {[ML (OH₂)₃] .xH₂O}_n (M = Cu²⁺, x = 1.; Co²⁺, x = 2 and Ni²⁺, x = 2) in molar ratio (1:1). Coats–Redfern and Horowitz–Metzger methods have been used for calculating the activation thermodynamic parameters of the thermal decomposition for H ₂ L and its polymer complexes. The interaction between H ₂ L and its transition metal complexes with the calf thymus DNA (CT‐DNA) was determined by UV–Vis spectra. Binding efficiency between H ₂ L with the receptors of the prostate cancer (PDB code 2Q7L Hormone) and the breast cancer (PDB code 1JNX Gene regulation) was studied by molecular docking. The inhibition behaviour of H ₂ L against the corrosion of carbon steel / HCl (2 M) solution was studied by weight loss, Tafel polarisation, electrochemical impedance spectroscopy (EIS) and electrochemical frequency modulation (EFM) techniques. The adsorption isotherm was found to be Friendlish isotherm. The morphology of inhibited carbon steel? s surface was studied using scanning electron microscope (SEM) and energy dispersive X‐ray spectroscopy (EDS).