Synthesis of graphene oxide and graphene quantum dots from miscanthus via ultrasound-assisted mechano-chemical cracking method

Whilst graphene materials have become increasingly popular in recent years, the followed synthesis strategies face sustainability, environmental and quality challenges. This study proposes an effective, sustainable and scalable ultrasound-assisted mechano-chemical cracking method to produce graphene oxide (GO). A typical energy crop, miscanthus, was used as a carbon precursor and pyrolysed at 1200 °C before subjecting to edge-carboxylation via ball-milling in a CO₂-induced environment. The resultant functionalised biochar was ultrasonically exfoliated in N-Methyl-2-pyrrolidone (NMP) and water to form GOs. The intermediate and end-products were characterised via X-ray diffraction (XRD), Raman, high-resolution transmission electron microscopy (HR-TEM) and atomic force microscopy (AFM) analyses. Results show that the proposed synthesis route can produce good quality and uniform GOs (8–10% monolayer), with up to 96% of GOs having three layers or lesser when NMP is used. Ultrasonication proved to be effective in propagating the self-repulsion of negatively-charged functional groups. Moreover, small amounts of graphene quantum dots were observed, illustrating the potential of producing various graphene materials via a single-step method. Whilst this study has only investigated utilising miscanthus, the current findings are promising and could expand the potential of producing good quality graphene materials from renewable sources via green synthesis routes.     

Correlation of band electronic structure with efficiency in perovskite solar cells with vanadium (Ⅳ) oxide thin film buffers

Perovskite solar cells have been studied extensively in the area of perovskite solar cells because they have a comparatively free hysteresis. Through fabrication of a perovskite solar cell based on a vanadium oxide buffer, this study clarified the mechanism of electron and hole transport in the laminated layer upon irradiation with light. The power conversion efficiency (PCE) of the Vanadium (Ⅳ) oxide (VO₂) sputtering process device was approximately 13% and with the spin-coating process was 8.5%. To investigate the physicochemical origin of such PCE differences depending on the process type, comprehensive band alignment and band structure analyses of the actual cell stacks were performed using X-ray photoelectron spectroscopy depth measurements. Accordingly, it was found that the inconsistent valence band offset between the perovskite absorption layer and V₂O₅ layer as a function of the VO₂ process type caused a difference in the hole transport, resulting in the difference in the efficiency.     

Enhanced photocatalytic degradation of organic dyes by ultrasonic-assisted electrospray TiO2/graphene oxide on polyacrylonitrile/β-cyclodextrin nanofibrous membranes

Polyacrylonitrile (PAN)/β-cyclodextrin (β-CD) composite nanofibrous membranes immobilized with nano-titanium dioxide (TiO₂) and graphene oxide (GO) were prepared by electrospinning and ultrasonic-assisted electrospinning. Scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), and X-ray diffraction (XRD) confirmed that TiO₂ and GO were more evenly dispersed on the surface and inside of the nanofibers after 45 min of ultrasonic treatment. Adding TiO₂ and GO reduced the fiber diameter; the minimum fiber diameter was 84.66 ± 40.58 nm when the mass ratio of TiO₂-to-GO was 8:2 (PAN/β-CD nanofibrous membranes was 191.10 ± 45.66 nm). Using the anionic dye methyl orange (MO) and the cationic dye methylene blue (MB) as pollutant models, the photocatalytic activity of the nanofibrous membrane under natural sunlight was evaluated. It was found that PAN/β-CD/TiO₂/GO composite nanofibrous membrane with an 8:2 mass ratio of TiO₂-to-GO exhibited the best degradation efficiency for the dyes. The degradation efficiency for MB and MO were 93.52 ± 1.83% and 90.92 ± 1.52%, respectively. Meanwhile, the PAN/β-CD/TiO₂/GO composite nanofibrous membrane also displayed good antibacterial properties and the degradation efficiency for MB and MO remained above 80% after 3 cycles. In general, the PAN/β-CD/TiO₂/GO nanofibrous membrane is eco-friendly, reusable, and has great potential for the removal of dyes from industrial wastewaters.     

Extended phase diagram of La1-xCaxMnO3 by interfacial engineering

The interfacial enhanced ferromagnetism in maganite/ruthenate system is regarded as a promising path to broaden the potential of oxide-based electronic device applications. Here, we systematically studied the physical properties of LaLa_1-xCa_xMnO₃/SrRuO₃ superlattices and compared them with the LaLa_1-xCa_xMnO₃ thin films and bulk compounds. The LaLa_1-xCa_xMnO₃/SrRuO₃ superlattices exhibit significant enhancement of Curie temperature (T_C) beyond the corresponding thin films and bulks. Based on these results, we constructed an extended phase diagram of LaLa_1-xCa_xMnO₃ under interfacial engineering. We considered the interfacial charge transfer and structural proximity effects as the origin of the interface-induced high T_C. The structural characterizations revealed a pronounced increase of B-O-B bond angle, which could be the main driving force for the high T_C in the superlattices. Our work inspires a deeper understanding of the collective effects of interfacial charge transfer and structural proximity on the physical properties of oxide heterostructures.     

Insight into influence of thermodynamic coefficients on transient negative capacitance in Zr-doped HfO2 ferroelectric capacitors

We study the influence of the thermodynamic coefficients on transient negative capacitance for the Zr-doped HfO₂ (HZO) ferroelectric capacitors by the theoretical simulation based on the Landau-Khalatnikov (L-K) theory and experimental measurement of electrical properties in the resistor-ferroelectric capacitor (R-FEC) circuit. Our results show that the thermodynamic coefficients α, β and γ also play a key role for the transient NC effect besides the viscosity coefficient and series resistor. Moreover, the smaller coefficients α and β, the more significant the transient NC effect. In addition, we also find that the thermodynamic process of transient NC does not obey the generally accepted viewpoint of Gibbs free energy minimization.     

Impaired pulmonary blood flow distribution in congestive heart failure assessed using synchrotron radiation microangiography

Synchrotron radiation microangiography is a powerful tool for assessing adverse changes in pulmonary vessel density associated with primary pulmonary hypertension (PH). Congestive heart failure (CHF) leads to a `secondary' onset of PH, yet it is unknown whether secondary PH is also associated with reduced vessel density. This study utilized synchrotron radiation to assess both pulmonary vessel density and endothelial function in a Dahl rat model of CHF with secondary PH. High salt‐fed Dahl salt‐sensitive (Dahl‐S) and salt‐resistant (Dahl‐R) rats were anesthetized and microangiography was performed to assess the pulmonary vessel density and vascular responses to (i) sodium nitroprusside (5.0 µg kg^?1 min^?1), (ii) acetylcholine (3.0 µg kg^?1 min^?1) and (iii) ET‐1_A receptor blockade, BQ‐123 (1 mg kg^?1). Dahl‐S rats developed CHF and secondary PH as evident by endothelial dysfunction, impaired vasodilatory responses to acetylcholine, enhanced vasodilatory responses to BQ‐123 and extensive pulmonary vascular remodeling. Consequently, the pulmonary vessel density was adversely reduced. Interestingly, the etiology of secondary PH manifests with structural and functional changes that are comparable with that previously reported for primary PH. One important discrepancy, however, is that ET‐1 modulation of pulmonary vessels is most striking in vessels with a diameter range of 100–200 µm in secondary PH, in contrast to a range of 200–300 µm in primary PH. Such discrepancies should be considered in future studies investigating primary and secondary forms of PH.     

X‐ray absorption study of the local structure at the NiO/oxide interfaces

This work reports an X‐ray absorption near‐edge structure (XANES) spectroscopy study at the Ni K‐edge in the early stages of growth of NiO on non‐ordered SiO₂, Al₂O₃ and MgO thin films substrates. Two different coverages of NiO on the substrates have been studied. The analysis of the XANES region shows that for high coverages (80 Eq‐ML) the spectra are similar to that of bulk NiO, being identical for all substrates. In contrast, for low coverages (1 Eq‐ML) the spectra differ from that of large coverages indicating that the local order around Ni is limited to the first two coordination shells. In addition, the results also suggest the formation of cross‐linking bonds Ni—O—M (M = Si, Al, Mg) at the interface.     

电场诱导氧化石墨烯的极化动力学特性研究

本文通过外加电场改变氧化石墨烯团簇分子的共振能量,利用激光激发氧化石墨烯产生的共振荧光特性测量氧化石墨烯在电场作用下的极化动力学特性. 发现存在外加电场使得荧光共振峰的半高全宽趋于饱和的时间特性,而不同的氧化石墨烯团簇分子的荧光共振峰的暂态特性同时反映了电场对氧化石墨烯产生定向极化和变形极化的动力学特性. 关键词： 氧化石墨烯 团簇分子 电场 极化动力学     

Synthesis of Fluorinated Graphene Oxide and its Amphiphobic Properties

The richly functionalized basal plane bonded to polar organic moieties makes graphene oxide (GO) innately hydrophilic. Here, a methodology to synthesize fluorinated graphene oxide by oxidizing the basal plane of fluorinated graphite, allowing for tunable hydrophobicity of GO, is reported. Fluorine exists as tertiary alkyl fluorides covalently bonded to graphitic carbons, and using magic‐angle spinning (MAS) ¹³C NMR as a primary tool chemical structures for the two types of synthesized fluorinated graphene oxides (FGOs) with significantly different fluorine contents are proposed. The low surface energy of the C–F bond drastically affects GO's wetting behavior, leading to amphiphobicity in its highly fluorinated form. Ease of solution processing enables the fabrication of inks that are spray‐painted on various porous/non‐porous substrates. These coatings maintain amphiphobicity for solvents with surface tensions down to 59 dyn/cm, thus bypassing existing lithographic means to create similar surfaces. The approach towards fluorinating GO and fabricating graphene‐based surfaces with tunable wettability opens the path towards unique, accessible, carbon‐based amphiphobic coatings.