基于变压红外光谱研究离子液体[MPIM][I]与石墨烯氧化物之间的相互作用

本研究利用红外光谱研究不同压力下离子液体1-Methy1-3-propylimidazolium iodide([MPIM][I])与石墨烯及其氧化物的相互作用.结果表明,[MPIM][I]对压力的变化具有高敏感度,咪唑环与烷基链在0.4 GPa时产生相变化,可明显观察到吸收峰的裂解,且连续加压会导致咪唑环与烷基链的振动频率蓝移.[MPIM][I]与石墨烯作用时加压至2.5 GPa也未观测到相变化的产生,且咪唑环与烷基链的振动频率蓝移趋势也不明显;[MPIM][I]与石墨烯氧化物作用时咪唑环与烷基链的结果与添加石墨烯时几乎相同.石墨烯氧化物具有羟基、羧基、环氧基等共价键结在其表面,这些羟基会扰动[MPIM][I]中的咪唑环与烷基链,导致在常压下振动频率发生蓝移,进而表明石墨烯表面的官能基团会与离子液体产生相互作用.     

紫外光电材料ZnO的反应溅射制备及研究

采用直流反应溅射法分别在Si(111),Si(001),及K4玻璃衬底上制备ZnO薄膜,研究了氧氩比、衬底温度以及退火处理对于晶体结晶质量的影响,发现生长过程中的退火处理提高了薄膜质量和晶面取向.通过优化生长条件,在衬底温度为350℃,氧氩比为1:2的条件下生长出了XRD半高宽为01°、C轴取向高度一致的ZnO薄膜.     

MgO在Mg-hBN体系中对合成cBN晶体的影响

 以金属镁粉为触媒，以六角氮化硼为原料，其中加入适量比例的氧化镁，在国产六面顶压机上，在约5.0 GPa压力、1 500～1 800 K温度条件下，合成出了颜色均匀、晶形完整的黄色立方氮化硼单晶体。实验结果表明，在Mg-hBN体系中，氧化镁对合成cBN晶体的颜色及合成温度有很大的影响。     

Luminescence properties of green emission of SiO2/Zn2SiO4:Mn nanocomposite prepared by sol–gel method

Green light emitting Mn²⁺ doped Zn₂SiO₄ particles embedded in SiO₂ host matrix were synthesized by a sol–gel method. After the incorporation of ZnO:Mn nanoparticles in a silica monolith using sol–gel method with supercritical drying of ethyl alcohol in two steps, it was heat treated in air at 1200 °C for 2 h in order to obtain the SiO₂/α-Zn₂SiO₄:Mn nanocomposites. The microstructure of phosphor crystals was characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). XRD results indicate that the pure phase α-Zn₂SiO₄ with rhombohedral structure was obtained after thermal treatment at 1200 °C. The SiO₂/α-Zn₂SiO₄:Mn nanocomposites with a Mn doping concentration of 1.5 at% exhibit two broadband emissions in the visible range: a strong green emission at around 525 nm and a second one in the range between 560 and 608 nm. This nanocomposite with a Mn doping concentration of 0.05 shows the highest relative emission intensity. Upon 255 nm excitation, the luminescence decay time of the green emission of Zn₂SiO₄:Mn around 525 nm is 11 ms. The luminescence spectra at 525 nm (⁴T₁–⁶A₁) and lifetime of the excited state of Mn²⁺ ions-doped Zn₂SiO₄ nanocrystals are investigated.     

Vibrational Structure of the B—X System of Isotopic Ago Molecules

Spectra of ¹⁰⁷Ag¹⁸O and ¹⁰⁷Ag¹⁶O molecules have been obtained in a low-pressure arc in oxygen atmosphere, and recorded with medium dispersion. Vibrational assignments for the bands of B ²π —X²π system were verified by the study of the oxygen isotope effect, and the vibrational constants were obtained for the states involved in transitions.     

氧化亚氮3000—0200和1001—0110跃迁带在高温下的线强度

采用乘积近似法计算了氧化亚氮分子的总配分函数，其中转动配分函数考虑了离心扭曲修正，振动配分函数采用谐振子近似. 利用计算所得的配分函数和实验振动跃迁矩平方及Herman-Wallis因子系数，计算了氧化亚氮3000—0200和1001—0110跃迁带在常温和高温下的线强度. 结果显示，当温度高达3000K时，计算所得线强度与实验值及HITRAN数据库提供的结果仍符合较好. 这表明高温下的分子配分函数和线强度的计算是可靠的. 还进一步计算了氧化亚氮3000—0200和1001—0110跃迁带在更高温度(40 关键词： 氧化亚氮 配分函数 线强度 高温     

三维多孔花状ZnO微纳结构的合成及光催化性能

采用电沉积及后续的热处理技术,在Ti衬底上合成了一种三维多孔花状ZnO微纳结构薄膜. 这种ZnO结构是由包含大量纳米颗粒和孔洞的纳米薄片组成,纳米颗粒的大小可以通过调节电沉积时间和煅烧温度控制. 光催化性能的测试表明这种多孔ZnO薄膜是一种理想的光催化剂.     

Characterization and chemical behavior of submonolayer coverages of titania on a Pt foil

The interaction between submonolayer titania coverages and Pt foil has been studied by Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS), temperature programmed desorption (TPD) and high-resolution electron energy loss spectroscopy (HREELS). The submonolayer titania can be fully oxidized to TiO₂ at 923 K under 10⁻⁸ Torr O₂, and partially oxidized to TiO_x at lower oxidation temperatures. The oxidized surface can be reduced by annealing to 1000 K or higher, or by heating in H₂ at 823 K, or by interacting with surface carbon formed from acetone decomposition. Under certain conditions (e.g., hydrogen reduction at 923 K), the surface titania can be fully reduced to metallic Ti which diffuses into bulk Pt readily. The reduced metallic Ti can resurface when the surface is oxidized at 923 K. Both XPS and HREELS data indicate the existence of subsurface oxygen, which plays an important role for the diffusion of Ti into and out of the Pt foil. Although no special interfacial active sites were revealed by HREELS studies of adsorbed acetone and CO, some TPD and XPS data suggest the presence of sites active for acetone decomposition.     

煅烧温度对Cu掺杂ZnO纳米粉体的制备及发光性能的影响

在PVA溶液中制备ZnO∶Cu纳米粉体的前驱体,经过煅烧获得ZnO∶Cu纳米粉体,考察煅烧温度对制备过程及发光性能的影响。利用XRD、TEM分析了产物的结构和形貌,XRD分析结果表明,当煅烧温度高于500℃时,可以使PVA完全分解,制备出具有六角纤锌矿结构的ZnO∶Cu粉体。TEM结果表明,粉体呈球形,大小均匀,分散性好,平均粒径为20～25 nm。在342 nm波长光的激发下,在ZnO∶Cu的室温PL光谱中可以观察到两个中心波长位于458 nm和486 nm的较强的蓝光发射峰,经400℃煅烧处理的ZnO∶Cu纳米粉体的蓝光发射最强。煅烧后的ZnO∶Cu只有微弱的绿光发射(510～530 nm),Cu的掺杂使ZnO的绿光发射变为蓝光发射。蓝紫光的发射波长随煅烧温度的升高产生明显的红移,由300℃时的404 nm红移至600℃时的422nm,发射强度随温度升高先增大后减小。     

A three‐dimensional surface‐enhanced Raman scattering substrate: Au nanoparticle supramolecular self‐assembly in anodic aluminum oxide template

A three‐dimensional surface‐enhanced Raman scattering (SERS) substrate via the self‐assembly of properly sized Au nanoparticles in anodic aluminum oxide templates was designed and prepared. Au nanoparticles first underwent hydrophobic surface modification. Then, the hydrophobic Au nanoparticles self‐assembled, aggregated and formed many hot spots in the anodic aluminum oxide templates through a supramolecular interaction. We chose thiophenol as a probe molecule to evaluate the SERS enhancement ability of this three‐dimensional substrate. The enhancement factor was calculated to be 4.6 × 10⁶ under the radiation of a 785‐nm laser. By further comparing SERS signals from different points on the same substrate, we confirmed that this substrate possessed good reproducibility and could be applied for SERS detection. Copyright © 2011 John Wiley & Sons, Ltd.