6—磺酰氯香豆素用作发光标记物的初探

过量C6SCl与丙氨酸在pH 9.11(H_3BO_3-NaOH)缓冲体系中,40℃反应40min,经乙酸乙酯萃取分离后,点样在层析聚酰胺膜上,用甲酸+水(1+1)展开,衍生产物得到很好的分离。斑点经1 mol·L~(-1)NaOH喷雾,紫外灯预光照10 min和干燥后,荧光强度与在4～60×10~(-11)mol范围内的丙氨酸量呈良好线性关系。在滤纸基质上,以Pb(AC)_2作重原子微扰剂,标记产物还能产生较强的室温磷光发射。研究表明,C6SCl不仅能作为氨基酸等的荧光标记物,而且可望作为其室温磷光的标记物。     

Solubility of α-amino acids in water under high pressure: glycine, -alanine, -valine, -leucine, and -isoleucine

The solubility of glycine, -alanine, -valine, -leucine, and -isoleucine in water was measured at 298.15 K and pressures up to 400 MPa. The standard deviation of the logarithm of the solubility is 0.001–0.003, equal to or better than the accuracy of atmospheric pressure measurement in the literature (0.001–0.05). A variety of solubility phenomena were observed. The solubility of glycine decreased with increasing pressure, whereas that of -alanine increased. The -valine and -isoleucine have a solubility maximum at around 100 MPa, and -leucine seems to exhibit a solid-phase phase transition at around 200 MPa. Pressure coefficient of the solubilities at 0.10 MPa is compared with that thermodynamically estimated in reference to aqueous density measurements of glycine and -alanine at 298.15 K and 0.10 MPa, supporting a reliability of our high-pressure measurements.     

双羟基极性键合固定相在氨基酸分析上的应用

我们曾报道了一类新型双羟基键合固定相(GDSB)的合成,研究表明这类固定相具有键合相浓度高,热和化学稳定性好的特点,可用于性质相似的有机化合物的分离。 本文以GDSB为色谱柱填料,含Cu~(2+)离子和烷基磺酸盐的HAc-NaAc缓冲溶液作流动     

各种氨基酸衍生物在Chirasil—Val固定相上的气相色谱分离

本文叙述氨基酸及其对映体的全氟酰基烷基脂(O-异丙基、-异丁基、-正丁基;N(O,S)-三氟乙酰基,TFA、-七氟丁酰基,HFB)在Chirasil-Val上的洗脱特性。随烷基取代增大,保留时间增加;用HFB代替TFA,对映体的分离因子降低。此外,DL-氨基酸与另丁醇衍生,生成的对映及非对映衍生物在Chirasil-Val上可拆分成四个色谱峰。     

氨基酸电位波谱分析机理的研究

本文研究了镍与酪氨酸、胱氨酸、脯氨酸、亮氨酸形成的四组络合物,在pH=10的Na_2B_4O_7·10H_2O-CH_3CHO-NaOH体系中,应用示波极谱进行电位扫描,出现四组灵敏度和分率辨均很高的电位波谱,为同时连续测定多组份共同存在的氨基酸分析方法提出一条新的途径。     

Equilibrium Studies of Binary and Ternary Complexes Involving Tricine and Some Selected α-Amino Acids

Summary. The formation equilibria for the binary complexes of Co^II, Ni^II, Cu^II, Zn^II, Cd^II, Mn^II, Pb^II, Th^IV, UO₂^II, and Ce^III with tricine and for the ternary complexes involving some -amino acids (glycine, -alanine, proline, serine, asparagine, and aspartic acid) were investigated using pH-metric technique. The formation of binary and ternary complexes was inferred from the pH-metric titration curves. It was deduced that tricine acts as a primary ligand in the ternary complexes involving the monocarboxylic amino acids (glycine, -alanine, proline, serine, and asparagine), whereas it behaves as a secondary ligand in the ternary systems containing the dicarboxylic aspartic acid. The ternary complex formation was found to take place in a stepwise manner. The stability constants of the complexes formed in aqueous solutions were determined potentiometrically under the experimental conditions (t=25°C, I=0.1moldm^–3 NaNO₃). The order of stability of the ternary complexes in terms of the nature of the amino acids is investigated and discussed. The values of log K for the ternary complexes have been evaluated and discussed. Evaluation of the effects of ionic strength and temperature of the medium on the stability of the ternary system M^II-tricine--alanine (M^II=Co^II, Ni^II, and Cu^II) has been studied. The thermodynamic parameters were calculated and discussed.     

Synthesis of amino acid-containing polyacids and their application in self-cured glass-ionomer cement

Six methacrylate or acrylate derivatives of natural amino acids were synthesized and characterized. Based upon these monomers, six terpolymers [poly(acrylic) acid-co-itaconic acid-co-amino acid] were prepared and characterized. The synthesized polymers were used to formulate glass-ionomer cements (GICs) using Fuji II glass filler. The effects of the molecular weight (MW) and powder/liquid (P/L) ratio were evaluated. Scanning electron microscopy (SEM) was used to examine the fracture surfaces of the selected cement specimens. Results show that all the amino acid modified GICs exhibited higher compressive strengths (CS, 193-236 MPa) and much higher flexural strengths (FS, 55-71 MPa) as compared to commercial Fuji II GIC (191 in CS and 16 in FS). Both MW and P/L ratio affected the strength of the formed cement. It was important to find the optimal MW and P/L ratio to obtain the highest FS. In this study, optimized MW (number average) of the polyacids and P/L ratio were around 50,000 and 2.7/1, respectively. The microstructures of the fracture surfaces helped to explain the strength differences among the materials tested in the study. SEM analysis suggests that more integrated microstructures and fewer defects can lead to higher FS.     

Effect of Mobile Phase pH* on Chromatographic Behaviour in Chiral Ligand-Exchange Thin-Layer Chromatography (CLETLC) of Amino Acid Enantiomers

The enantiomers of some amino acids have been separated on commercial chiral TLC plates in reversed-phase mode. The effect of the pH* of the aqueous-organic mobile phase on the retention and mobility of the enantiomers and on selectivity was investigated. It was shown that for most of the amino acids investigated the highest enantioselectivity was obtained at pH* 3–4 or 6–7. The drift and disturbance of the baseline on the chromatograms were also much smaller at pH* 3–4 and 6–7.     

A facile synthesis of (S)-gizzerosine, a potent agonist of the histamine H2-receptor

A simple and direct approach for the synthesis of (S)-gizzerosine, an amino acid responsible for the disease, black vomit, and a potent histamine H₂-receptor, has been developed in 10 steps and in 31% overall yield from l-aspartic acid. The key steps involved a two-carbon homologation of an l-aspartic acid semi-aldehyde and direct alkylation of unprotected histamine with a 6-hydroxynorleucine derivative.