High temperature gas chromatography: The development of new aluminum clad flexible fused silica glass capillary columns coated with thermostable nonpolar phases: Part 1

With the simultaneous development of blank aluminum clad flexible fused silica glass capillary tubing capable of withstanding temperatures up to 500°C, coincident with a series of special high temperature methyl polysiloxane polymers, it was possible to produce for the first time, long lived fused silica capillary columns containing thin films of thermostable stationary phases which could be maintained isothermally at 400425°C and temperature programmed to 425–440°C. The “bleed rate” here for a well conditioned column was 5 picoamperes or less. Under these circumstances, alkanes with carbon numbers in the C-90 to C-100 area were rapidly and efficiently eluted from these columns. By extrapolation here, one can easily detect certain compounds with boiling points in the 750°C range. Since this type of capillary column was found to possess certain favorable properties, it was thought that it will soon replace the packed column and will probably be more popular than the borosilicate capillary column for many high temperature applications. Moreover, evidence has now accumulated which leads us to further believe that the majority of analyses of “high molecular weight” compounds performed by Supercritical Fluid Chromatography (SFC), utilizing very narrow bore fused silica capillary columns at several hundred atmospheres, can be much more simply, much more rapidly, much more economically, and much more efficiently accomplished by gas chromatography utilizing this new generation of high temperature capillary columns.     

Cationic polymerization of dienes VII. New electron donors in the polymerization of 1,3-pentadiene initiated by aluminum trichloride in non-polar solvent

The aim of this research was to investigate new bulky electron donors (EDs) generating hindered active species in the cationic polymerization of 1,3-pentadiene initiated by AlCl₃ in pentane, in order to avoid or strongly reduce the reaction between the active species and the double bonds of the polymer which are responsible for side reactions. At room temperature, the polymerization in the presence of new ED, such as OPh₂, N(PhBr)₃, NPh₃ and SPh₂, allowed to obtain higher conversions and lower insoluble fractions than without electron donor. The formation of a complex ED/AlCl₃ was shown for each electron donor. However, in the case of NPh₃ and SPh₂, variations of the polymer microstructure demonstrated an interaction between active species and these EDs. Similar results were obtained at lower temperature (−10 °C). The beneficial effect of the presence of electron donors such as NPh₃ and SPh₂ demonstrated the validity of the concept of sterically hindered active species, but the polymerization was still uncontrolled.     

低浓度HPAM/AlCit交联体系的27Al NMR研究

用27Al NMR谱研究了高分子量低浓度的部分水解聚丙烯酰胺(HPAM)与柠檬酸铝(AlCit)体系交联反应过程中Al的化学位移和Al的自旋-晶格弛豫时间的变化. 结果表明, HPAM与AlCit反应后, 与HPAM分子链上的羧基发生配位交联的Al的化学位移向低场移动, 而不参与交联反应的AlCit分子结构中Al的化学位移基本不变. HPAM/AlCit交联体系中存在三种形态的Al, 分别对应三种不同的自旋-晶格弛豫时间. 当HPAM的质量浓度≤200 mg/L时, HPAM与AlCit反应过程中交联态Al的自旋-晶格弛豫时间τ13随反应进行变小, HPAM与AlCit主要发生分子内交联反应. 当HPAM的质量浓度≥250 mg/L时, HPAM与AlCit反应过程中交联态Al的自旋-晶格弛豫时间τ13随反应进行变大, HPAM与AlCit主要发生分子间交联反应.     

Microchip electrophoretic protein separation using electroosmotic flow induced by dynamic sodium dodecyl sulfate-coating of uncoated plastic chips

Separation of sodium dodecyl sulfate (SDS)-protein complexes is difficult on plastic microchips due to protein adsorption onto the wall. In this paper, we elucidated the reasons for the difficulties in separating SDS-protein complexes on plastic microchips, and we then demonstrated an effective method for separating proteins using polymethyl methacrylate (PMMA) microchips. Separation difficulties were found to be dependent on adsorption of SDS onto the hydrophobic surface of the channel, by which cathodic electroosmotic flow (EOF; reversed flow) was generated. Our developed method effectively utilized the reversed flow from this cathodic EOF as a driving force for sample proteins using permanently uncoated but dynamic SDS-coated PMMA microchips. High-speed (6 s) separation of proteins and peptides up to 116 kDa was successfully achieved using this system.     

The Additive Influence of Propane-1,2-Diol on SDS Micellar Structure and Properties

Micellar systems are colloids with significant properties for pharmaceutical and food applications. They can be used to formulate thermodynamically stable mixtures to solubilize hydrophobic food-related substances. Furthermore, micellar formation is a complex process in which a variety of intermolecular interactions determine the course of formation and most important are the hydrophobic and hydrophilic interactions between surfactant–solvent and solvent–solvent. Glycols are organic compounds that belong to the group of alcohols. Among them, propane-1,2-diol (PG) is a substance commonly used as a food additive or ingredient in many cosmetic and hygiene products. The nature of the additive influences the micellar structure and properties of sodium dodecyl sulfate (SDS). When increasing the mass fraction of propane-1,2-diol in binary mixtures, the c.m.c. values decrease because propane-1,2-diol is a polar solvent, which gives it the ability to form hydrogen bonds, decreasing the cohesivity of water and reducing the dielectric constant of the aqueous phase. The values of ΔGm0 are negative in all mixed solvents according to the reduction in solvophobic interactions and increase in electrostatic interaction. With the rising concentration of cosolvent, the equilibrium between cosolvent in bulk solution and in the formed micelles is on the side of micelles, leading to the formation of micelles at a lower concentration with a small change in micellar size. According to the ¹H NMR, with the addition of propylene glycol, there is a slight shift of SDS peaks towards lower ppm regions in comparison to the D₂O peak. The shift is more evident with the increase in the amount of added propane-1,2-diol in comparison to the NMR spectra of pure SDS. Addition of propane-1,2-diol causes the upfield shift of the protons associated with hydrophilic groups, causing the shielding effect. This signifies that the alcohol is linked with the polar head groups of SDS due to its proximity to the SDS molecules.     

Ultra-slow Relaxation Dynamics in Triglycine Sulfate and D-Sorbitol Studied by Time-resolved Spectroscopy

The ultra-slow modes with a relaxation time much longer than 1 ns are discovered by a time-resolved spectroscopy in uniaxial ferroelectric (NH₂CH₂COOH)₃H₂SO₄ (TGS) and in glass-former HOCH₂(CHOH)₄CH₂OH (D-sorbitol). A mode discovered in TGS is a thermal relaxational mode and is proved to be the physical origin of the central peak found by Brillouin scattering. Two modes are discovered in D-sorbitol. One is a thermal relaxational mode. The other is a mode characterized by the Kohlraush-Williams-Watts function with a relaxation time _R. A remarkable result is that _R indicates a critical behavior not at the liquid-glass transition temperature T_g =–7°C but at the ergodic to nonergodic transition temperature T_c=33°C.This revised version was published online in November 2005 with corrections to the Cover Date.     

FIA-ICP/AES法分析茶叶浸取液中多元素的形态

本文报道了分析茶叶浸取液中[Zn、Mn、Fe、Al及Mg]形态的新方法。研究了以C-18柱为分离柱的流动注射与ICP/AES的联用技术。     

离子色谱法测定电镀锡溶液中的SO42-

采用络合反应，消除电镀锡溶液中金属离子对分离柱的污染，应用离子色谱法检测电镀液中SO4^2-的含量，回收率为95％－104％。     

Hygrometric Determination of Water Activities, Osmotic and Activity Coefficients, and Excess Gibbs Energy of the System MgSO4–K2SO4–H2O

Ternary aqueous solutions of MgSO₄ and K₂SO₄ have been studied by the hygrometric method at 25°C. The relative humidity of this system is measured at total molalities from 0.35 mol-kg^–1 to about saturation for three ionic-strength fractions (y = 0.25, 0.50, and 0.80 of MgSO₄. The data allow calculation of water activities and osmotic coefficients. From these measurements, the Pitzer ionic mixing parameters are determined and used to predict the solute activity coefficients in the mixture. The results are used to calculate the excess Gibbs energy at total molalities for ionic-strength fraction y.     

Effect of Sulfate on an Iron Manganese Catalyst for Fischer-Tropsch Synthesis

The effect of sulfate on Fischer-Tropsch synthesis performance was investigated in a slurry- phase continuously stirred tank reactor(CSTR)over a Fe-Mn catalyst.The physiochemical properties of the catalyst impregnated with different levels of sulfate were characterized by N_2 physisorption,X-ray photoelectron spectroscopy(XPS),H_2(or CO)temperature-programmed reduction(TPR),Mφssbauer spectroscopy,and CO_2 temperature-programmed desorption(TPD).The characterization results indicated that the impregnated sulfate slightly decreased the BET surface area and pore volume of the catalyst, suppressed the catalyst reduction and carburization in CO and syngas,and decreased the catalyst surface basicity.At the same time,the addition of small amounts of sulfate improved the activities of Fischer- Tropseh synthesis(FTS)and water gas shift(WGS),shifted the product to light hydrocarbons(C_1-C_(11)) and suppressed the formation of heavy products(C_(12 )).Addition of SO_4~(2-)to the catalyst improved the FTS activity at a sulfur loading of 0.05-0.80 g per 100 g Fe,and S-05 catalyst gave the highest CO conversion(62.3%),and beyond this sulfur level the activity of the catalyst decreased.