三氯化钛存在下碘酸钾滴定法测定锡

提出了采用铝加铁混合还原剂还原,三氯化钛存在下碘酸钾滴定法测定锡的绝对测量方法,研究了三氯化钛抑制氧的作用效果及作用机理。应用于巴氏合金中锡含量的测定,方法简便、快速,结果准确可靠。     

Al-Mg MMH溶胶和钠土悬浮体的相互作用机理

通过流变参数、电泳淌度和pH值的测定,研究了无机盐(CaCl₂、KCl、NaCl)和pH值对铝镁混合金属氢氧化物与钠土悬浮体间相互作用的影响。发现随着混合金属氢氧化物含量的增加,钠土体系的pH值逐渐降低,而动切力(YP)先上升,经最大值后逐渐下降;当钠土体系为NaCl所饱和时,相同混合金属氢氧化物加量下YP的上升幅度明显减小,在实验混合金属氢氧化物浓度范围内,YP未出现峰值。混合金属氢氧化物/钠土体系的YP随pH值的变化曲线呈抛物线形,加入相同浓度的无机盐,△YP、△pH(绝对值)按CaCl₂KCl～NaCl次序递减。     

Synthesis,characterization, and antitumour studies of some curcuminoid analogues and their aluminum complexes

Aluminum(III) complexes of three curcuminoid analogues [1,7-diphenyl-1,6-heptadiene-3,5-dione, HL¹; 1,7-bis(2-hydroxyphenyl)-1,6-heptadiene-3,5-dione, HL²; and 1,7-bis(4-ethoxyphenyl)-1,6-heptadiene-3,5-dione, HL³] of [AlL₃] stoichiometry were synthesized and characterized by UV, IR, ¹H NMR, and mass spectral data. The compounds were investigated for cytotoxic and antitumor activities. The aluminum chelates are remarkably active compared to free curcuminoid analogues. The aluminum complex of HL² with hydroxyl in the phenyl ring was most active towards Ehrlich ascites carcinoma cells (concentration needed for 50% inhibition of 5?μg/mL) and cultured L929 cells (1?μg/mL produced 60?+?3% cell death). Increase in lifespan and reduction of solid tumor volume in mice were also largest for the aluminum complex of HL². The study reveals that the antitumor activities of curcuminoids are more enhanced by complexation with aluminum than with transition metal ions.     

Nickel pentacyanonitrosylferrate film modified aluminum electrode for electrocatalytic oxidation of hydrazine

The electrocatalytic oxidation of hydrazine at the aluminum electrode, modified by electroless deposition of nickel pentacyanonitrosylferrate (NiPCNF) on the surface of the electrode has been studied by cyclic voltammetry, chronoamperometry and rotating disk electrode voltammetry and the kinetics of the catalytic reaction were investigated. The results were explained using the theory of electrocatalytic reactions at chemically modified electrodes. It was found that a one-electron charge-transfer process is rate limiting and that the average values of the rate constant for the catalytic reaction and the diffusion coefficient, evaluated by different approaches, are 5.2×10³ M^–1s^–1 and 8.5×10^–6 cm²s^–1, respectively. Further examinations of the modified electrodes show that the modifying layers (NiPCNF) on the aluminum substrate have reproducible behavior and a high level of stability, after exposing them in air and hydrazine solutions for a long time. Electronic Publication     

Electroactive conducting polymers for corrosion control

There is an intensive effort underway to develop new corrosion control coatings for structural metals. In part, this effort has been motivated by the desire to replace chromium(VI)-containing coatings currently used for corrosion control of iron and aluminum alloys. Cr(VI) has been shown to be hazardous to the environmental and to human health, and its use in many countries will be sharply curtailed in the coming years. Electroactive conducting polymers (ECPs) represent a class of interesting materials currently being explored for use in corrosion control coating systems, possibly as a replacement for Cr(VI)-based coatings. The electroactivity and the electronic conductivity (or semiconductivity) of ECPs set them apart from traditional organic coatings. As with chromate, interesting and potentially beneficial interactions of ECPs with active metal alloys such as steel and aluminum are anticipated, with concomitant alteration of their corrosion behavior. A review of this active research area will be presented in two parts. Here in Part 1, a general introduction to the topic of corrosion control by ECPs will be presented, including an overview of corrosion and its control by traditional methods, an introduction to ECPs and their properties, and a discussion of the processing issues surrounding the use of ECPs as coatings. Part 1 also includes a review of the literature on the use of ECPs as coatings (or components of coatings) on non-ferrous active metals, principally aluminum and aluminum alloys, although some work on zinc, copper, silver, titanium and silicon will also be described. In Part 2 of this review (to be published in the next issue of this journal), the rather extensive literature on the use of ECPs for the corrosion control of ferrous alloys (steels) will be reviewed. Electronic Publication     

Preparation of fluorine compounds of groups 13 and 14: a study case for the diagonal relationship of aluminum and germanium

The synthesis of carbaalanes of composition [(AlF)₆(AlNMe₃)₂(CR)₆] containing terminal fluorine atoms is described. The clusters have in common that the central core consists of eight aluminum and six carbon atoms. Six of the eight aluminum atoms are bearing six terminal fluorine atoms. The fluorination of (t-BuNCH₂AlH)₄ results in the formation of the aggregate (t-BuNCH₂AlF)₄. In group 14, the fluorine containing unsaturated compounds LGeF, LGeS(F), LGeSe(F), and LGeNSiMe₃(F) were prepared (LHC(CMeNAr)₂), Ar = 2,6-iPr₂C₆H₃ and Ar = 2,6-Me₂(C₆H₃)).     

Flow Injection Analysis of Aluminum Chlorohydrate in Antiperspirant Deodorants Using a Built‐in Three‐in‐one Screen‐Printed Silver Electrode

A screen‐printed silver strip with a built‐in three‐in‐one electrode (SPAgE) configuration of Ag‐working, Ag‐counter and Ag/Ag_xO (silver oxides) pseudoreference electrodes has been developed for sensitive and selective electrochemical flow injection analysis (FIA) of aluminum chlorohydrate (ACH) present in antiperspirants, through the free Cl^? ion liberated from ACH in aqueous medium, as a redox signal at Ag‐working electrode in pH 6 phosphate buffer solution (PBS). The solution phase and instrumental parameters were systematically optimized. The calibration graph was linear in the window 1–200 ppm concentration of ACH and the lowest detection limit (S/N=3) was 295 ppb with a slope of 0.0989 μA/ppm and regression coefficient of 0.998. Calculated relative standard deviation (RSD) values for the detection of 5 and 50 ppm ACH by this method are 2.21 % and 2.16 %, respectively. Four different antiperspirant deodorants real samples with and without ACH content were successfully analyzed and the detected values obtained were found to be in good agreement with the product labeled values.     

硼酸铝纳米棒的制备、结构及生长机理

以仲丁醇铝和硼酸为原料, 葡萄糖作模板剂, 在水介质中120 ℃形成淡黄色干凝胶, 再于750 ℃焙烧得到尺寸均一的硼酸铝纳米棒. 通过改变仲丁醇铝/硼酸的摩尔比实现了对产物形貌及长径比的控制合成. 采用X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)对产物结构和形貌进行表征. 结果表明产物为Al4B2O9纳米棒, 直径为15-45 nm, 长度为100-300 nm. 根据表征结果对葡萄糖参与的硼酸铝纳米棒的生长机理进行了探讨. 结果表明, 葡萄糖与硼酸反应产生网状结构的配合物, 同时释放质子, 促使铝源均匀地分散在网格间, 为硼酸铝的生成提供一有利的反应空间. 纳米棒的生长为自催化生长过程, 在750 ℃热处理时沿着(100)面方向生长.     

8-羟基喹啉动态有序介孔SiO_2涂层毛细管微萃取与ICP-MS在线联用分析天然水中铝的形态

本文采用溶胶-凝胶方法合成SiO_2溶胶,制备了8-羟基喹啉改性的有序介孔SiO_2涂层毛细管,建立了毛细管微萃取-电感耦合等离子体质谱(CME-ICP-MS)在线联用技术分析铝形态的新方法.选择游离态铝和Al-柠檬酸络合物为不同铝形态的代表物,详细探讨了不同实验参数对铝形态分离的影响.结果表明:8-羟基喹啉改性的有序介孔SiO_2涂层毛细管在pH为5.0～8.0的范围内可以有效地分离试样中的稳定态单核铝(柠檬酸铝)和非稳定态无机单核铝(游离态铝).方法的富集倍数为10,检出限为0.34 ng·mL~(-1).该法应用于湖水、池塘水和长江水中铝的组形态分析,所得结果与8-羟基喹啉负载硅胶微柱分离所得结果吻合很好.     

化学/电化学腐蚀法快速制备超疏水金属铝

提出一种金属铝超疏水表面的快速制作方法. 先以化学腐蚀在铝表面形成微米级粗糙结构, 再通过电化学腐蚀构筑纳米结构, 在20 min内完成了超疏水表面所需粗糙结构的制备. 这种化学腐蚀/电化学腐蚀两步法比单独化学或电化学腐蚀方法在时间上缩短了1~2个数量级, 且不受铝材晶形限制, 同时电化学腐蚀所用电流密度也降低了1个数量级, 降低了对电源设备的要求, 可望大规模应用于工业生产和其它金属的超疏水表面制备.