Headgroup effect on drag reduction and rheological properties of micellar solutions of quaternary ammonium surfactants

Two sets of cationic surfactants each with essentially the same alkyl chains but different headgroup structures were studied to investigate the effects of surfactant headgroup structure on micelle microstructures, drag reduction (DR) and rheological properties at certain counterion and surfactant concentrations. Cetyldimethylethylammonium bromide (CDMEAB) was compared with alkyltrimethyl ammonium bromide (CnTAB) and benzyldimethyl(hydrogenated tallow)ammonium chloride (DMHTB) was compared with alkyltrimethylammonium chloride (CmTAC), respectively. Surfactants with larger headgroups showed lower high temperature limits for DR. CDMEAB systems have better DR abilities than CnTAB below room temperature but the opposite is true at higher temperatures. DMHTB has stronger counterion binding ability than CmTAC, giving better DR properties than CmTAC at low counterion concentration, but has a lower upper temperature limit for DR. These results provide further understanding of the self-assembly nature of threadlike micelles of cationic surfactants and guidance for design of effective surfactant structures to meet particular DR requirements.     

Degradation effects of dilute polymer solutions on turbulent drag reduction in pipe flows

An important practical problem in the application and study of drag reduction by polymer additives is the degradation of the polymer, for instance due to intense shearing, especially in recirculatory flow systems. Such degradation leads to a marked loss of the drag-reducing capability of the polymer.Three different polymer types were tested on degradation effects in a closed pipe flow system. The polymers used were Polyox WSR-301, Separan AP-273 and Superfloc A-110, dissolved in water in concentrations of 20 wppm each. The flow system consisted of a 16.3 mm pipe of 4.25 m length. Two different pumps were used: a centrifugal pump and a disc pump. Different solution-preparation procedures were tried and the experiments were performed at different flow rates.Superfloc A-110 proved to be both the most effective drag reducer and most resistant to degradation. Because of very fast degradation, Polyox WSR-301 was found to be unsuitable for being used as a drag reducer in re-circulatory systems. The disc pump proved to be much better suited for pumping the polymer solutions than the centrifugal pump. The degradation curve of the combination Superfloc/disc pump showed a plateau-like region with reasonable drag reduction, which makes it possible to perform (laser Doppler) measurements under nearly constant circumstances during a sufficient time.     

The mechanism of polymer thread drag reduction

One very effective method of reducing the drag of a turbulent fluid flow is through the use of soluble, viscoelastic, long-chain, high-molecular-weight polymer additives. These additives have produced drag reduction of up to 80% in pipe flows. Polymers are typically added by injecting high concentration solutions into an established Newtonian flow.This study investigated the mechanism of drag reduction that occurs when a long-chain, high-molecular-weight polymer is injected along the centerline of a pipe with a concentration high enough to form a single, coherent, unbroken thread. In the present experiments, the unbroken threads existed for more than 200 pipe diameters downstream of the injector and produced drag reductions on the order of 40%. Previous authors have contended that this type of drag reduction is caused by the interaction of the thread with the outer flow. However, it has been proven in cases where the polymer is mixed throughout the flow that drag reduction requires the existence of polymer in the near-wall region. The objective of this study was to test the hypothesis that drag reduction from a polymer thread is caused by transport of polymer molecules from the thread into the near-wall region of the pipe. The objective was realized through the measurement of the drag reduction, the radial location of the thread, and the polymer concentration in the near-wall region. The concentration was measured by laser-induced fluorescence utilizing fluorescein dye as the tracer. This study provides strong evidence that the drag reduction from a polymer thread is caused by the transport of very low concentrations of polymer from the thread into the near-wall region.     

Combination of HAADF‐STEM and ADF‐STEM Tomography for Core–Shell Hybrid Materials

Characterization of core–shell type nanoparticles in 3D by transmission electron microscopy (TEM) can be very challenging. Especially when both heavy and light elements coexist within the same nanostructure, artifacts in the 3D reconstruction are often present. A representative example would be a particle comprising an anisotropic metallic (Au) nanoparticle coated with a (mesoporous) silica shell. To obtain a reliable 3D characterization of such an object, a dose‐efficient strategy is proposed to simultaneously acquire high‐angle annular dark‐field scanning TEM and annular dark‐field tilt series for tomography. The 3D reconstruction is further improved by applying an advanced masking and interpolation approach to the acquired data. This new methodology enables us to obtain high‐quality reconstructions from which also quantitative information can be extracted. This approach is broadly applicable to investigate hybrid core–shell materials.     

高聚物减阻溶液对壁湍流输运过程的影响

基于相同雷诺数下清水和高分子聚合物溶液壁湍流的高时间分辨率粒子图像测速技术(time-resolved particle image velocimetry, TRPIV)的对比实验, 从高聚物溶液对湍流边界层动量能量输运影响的角度分析其减阻的机理. 对比两者的雷诺应力发现高聚物的存在抑制了湍流输运过程. 这一影响与高聚物对壁湍流中占主导地位的涡旋运动和低速条带等相干结构的作用密切相关. 运用条件相位平均、相关函数和线性随机估计(linear stochastic estimation, LSE)等方法, 分析提取了高聚物溶液流场中的发卡涡和发卡涡包等典型相干结构的空间拓扑形态. 相比于清水, 高聚物溶液中相干结构的流向尺度增大, 涡旋运动的发展及低速流体喷射的强度受到削弱, 表明了添加的高聚物阻碍了湍流原有的能量传递和自维持的机理. 正是通过影响相干结构, 高聚物抑制了湍流边界层中近壁区与外区之间的动量和能量输运, 使得湍流的无序性降低, 从而减小了湍流流动的阻力.     

A non-aggregation colorimetric assay for thrombin based on catalytic properties of silver nanoparticles

In this paper, we developed a simple and rapid colorimetric assay for protein detection based on the reduction of dye molecules catalyzed by silver nanoparticles (AgNPs). Aptamer-modified magnetic particles and aptamer-functionalized AgNPs were employed as capture and detection probes, respectively. Introduction of thrombin as target protein could form a sandwich-type complex involving catalytically active AgNPs, whose catalytic activity was monitored on the catalytic reduction of rhodamine B (RhB) by sodium borohydride (NaBH₄). The amount of immobilized AgNPs on the complex increased along with the increase of the thrombin concentration, thus the detection of thrombin was achieved via recording the decrease in absorbance corresponding to RhB. This method has adopted several advantages from the key factors involved, i.e., the sandwich binding of affinity aptamers contributed to the increased specificity; magnetic particles could result in rapid capture and separation processes; the conjugation of AgNPs would lead to a clear visual detection. It allows for the detection limit of thrombin down to picomolar level by the naked eye, with remarkable selectivity over other proteins. Moreover, it is possible to apply this method to the other targets with two binding sites as well.     

氢气还原制备高电容多孔Mn3O4/rGO复合材料

Mn3O4资源丰富、结构稳定,具有较高的理论电容,是一种较有潜力的超级电容器材料,但其较差的导电性却阻碍了其在这方面应用。本论文以实心ε-MnO2微米粉体和具有亲水性的GO粉体为原料,在去离子水中通过磁力搅拌和冷冻干燥制备出具有良好接触的MnO2/GO复合粉体。然后经一步氢气还原处理,使实心ε-MnO2和GO同步转化为具有纳米多孔结构的多孔Mn3O4和RGO,从而获得分散均匀、具有高比表面积和优良导电性的高性能Mn3O4/RGO复合粉体。经电化学测试可知,Mn3O4/RGO复合粉体在2 mV/s的扫描速率下的比电容为25.2 F/g且具有较好的电容留存率。     

Mild generation of selenolate nucleophiles by thiol reduction of diselenides: convenient syntheses of selenyl-substituted aryl aldehydes

Various selenyl-substituted aryl aldehydes were obtained using dithiothreitol (DTT) as a reducing agent for diselenides in the presence of a base. For electron-deficient haloaryl aldehydes, a weak base, such as K₂CO₃, performed well. However, for electron-rich haloaryl aldehydes, a stronger base, such as 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU), was required for successful substitution. The selenyl-substitution of heteroaryl substrates were also investigated to obtain satisfactory yields of the desired products.     

Novel acid-mediated reactions of phenyl-substituted lactams

Treatment of 3-phenylazetidin-2-one and 7-phenylazepin-2-one with triflic acid in benzene gave a novel, high yielding conversion to 3,3-diphenylpropionamide and 6,6-diphenylhexanoic acid amide, respectively. However, with AlCl₃, 7-phenylazepin-2-one was converted into 3-phenylazepin-2-one via a retro-Beckman rearrangement.     

Infrared laser-produced carbon-phase shield to oxidation of nanosized titanium monoxide

Pulsed infrared laser-irradiation of titanium monoxide leads to ablation and when carried out in gaseous benzene (1-5 Torr) to simultaneous dielectric breakdown of benzene into low molecular carbonaceous species which allow carbothermal reduction of ablated TiO_x particles and their protection by carbonaceous shell. The deposited particles are characterized by Fourier transform infrared Raman and X-ray photoelectron spectroscopy and by electron microscopy and shown to be stable towards oxidation in air. The reported process can find use in protection of gas-phase produced reactive nanoparticles by carbon phase.