茂锆载体催化剂下的乙烯／辛烯共聚及聚合物的^13C NMR研究

茂锆载体催化剂下的乙烯／辛烯共聚及聚合物的~（１３）ＣＮＭＲ研究刘胜生，于广谦，黄葆同（中国科学院长春应用化学研究所长春１３００２２）关键词茂锆载体催化剂，共聚，序列分布，~（１３）ＣＮＭＲ由于茂锆催化剂具有高活性，单一活性中心等特点［１，２］，并且能...     

La0.8Ca0.2MnO3纳米线的制备及表征

利用Sol-gel法结合氧化铝模板技术制备了La0.8Ca0.2MnO3纳米线, 并研究了两种热处理方法对 La0.8Ca0.2MnO3纳米线结构和形貌的影响. 快速升温到800 ℃得到的La0.8Ca0.2MnO3纳米线较粗, 其直径大于氧化铝模板的孔径, 而经过缓慢升温到400 ℃预处理再升温到800 ℃得到的La0.8Ca0.2MnO3纳米线, 其直径和氧化铝模板的孔径相当, 都约为35 nm. X射线衍射和透射电镜分析结果表明, 两种方法得到的 La0.8Ca0.2MnO3纳米线都是具有钙钛矿结构的属于单斜晶系的多晶材料.     

Ni2（OEt）2／SiO2催化二氧化碳与丙烯直接合成甲基丙烯酸的研究

 采用表面改性法制备了负载型Ni2（OEt）2／SiO2双核金属乙氧基配合物催化剂，利用示差量热、红外光谱和微反技术对催化剂的表面结构、热稳定性、化学吸附性质和催化活性进行了研究．结果表明，负载型双核金属乙氧基配合物Ni2（OEt）2／SiO2中的Ni2＋与载体SiO2表面的O2－以双齿配位形式键合；二氧化碳在催化剂表面存在桥式吸附态和碳酸单乙酯基物种两种吸附态，丙烯则只有一种分子吸附态；在适宜的反应条件下，二氧化碳和丙烯在Ni2（OEt）2／SiO2催化剂上的反应产物主要是甲基丙烯酸．根据实验结果，提出了二氧化碳和丙烯在Ni2（OEt）2／SiO2催化剂表面的反应机理，反应物分子共吸附于催化剂表面同一活性单元上，羧酸根和丙烯解离吸附态的形成是反应顺利进行的关键步骤．     

Counterpoise-corrected potential energy surfaces of simple H-bonded systems

Geometries and stabilization energies of various simple H-bonded complexes (water dimer, hydrogen fluoride dimer, formamide dimer, formic acid dimer) have been determined by a gradient optimization that eliminates the basis set superposition error (BSSE) by the counterpoise (CP) method in each gradient cycle as well as by the standard gradient optimization. Both optimization methods lead to different potential energy surfaces (PES). The difference depends on the theoretical level used and is larger if correlation energy is considered. Intermolecular distances from the CP-corrected PES are consistently longer, and this difference might be significant (∼0.1 ?); also angular characteristics determined from both surfaces differ significantly. Different geometries were obtained even when passing to larger basis sets (aug-cc-pVDZ). The standard optimization procedure can result in a completely wrong structure. For example, the “quasi-linear” structure of the (HF)₂ (global minimum) does not exist at the standard MP2/ 6-31G** PES (where only cyclic structure was detected) and is found only at the CP-corrected PES. Stabilization energies obtained from the CP-corrected PES are always larger than these from the standard PES where the BSSE is added only a posteriori for the final optimized structure; both energies converge only when passing to a larger basis set (aug-cc-pVDZ). Received: 11 March 1998 / Accepted: 19 June 1998 / Published online: 4 September 1998 RID=" ID=" <E6>Acknowledgements.</E6> The project was supported by the Grant Agency of the Czech Republic (Grant No. 203/98/1166). RID=" ID=" <E5>Correspondence to</E5>: P. Hobza     

Fe-Co-Ni合金纳米线有序阵列的模板合成与磁性

以二次阳极氧化的氧化铝膜为模板，用电化学沉积的方法成功地合成了Fe-Co-Ni三组份有序纳米线阵列.扫描电子显微镜（SEM）和透射电子显微镜(TEM)观察表明纳米线表面光滑、有序、高长径比；磁性测量表明,其矫顽力较同组份的膜材料有较大的提高.将样品在惰性气体氛围中不同温度下退火，随着退火温度增加，其纵向矫顽力有一个极值，而对应的横向矫顽力没有类似的变化，关于这一现象的机理,本文进行了初步的讨论. 图5参15     

乙醇羰化反应负载型催化剂的研究

本文由七种负载型催化剂中选出两种比较好的乙醇羰化催化剂,研究了影响反应转化率和选择性的因素,考察了活性组份的价态和载体的酸性。此外,还对催化剂进行了能量色散X射线分析。从其结果看,谱图上只有活性中心铑的谱峰而没有氯的谱峰,说明铑是以离子形式进入载体,而不是以化合物形式被吸附于载体上。     

Role of the solvent in thin-layer chromatography of steroids on alumina

The effects of different binary solvents on the retention behaviour of some steroids in thin-layer chromatography on alumina were studied. The slope of the linear relationship between the retention constant of the steroid and the logarithm of the volume fraction fo the polar component in the binary solvent mixture depends predominantly on the diluent. Linear relationships between the axis intercepts and slopes of particular steroids exists for all chromatographic systems examined. The slope of this relationships is a function of the retention constant of the steroid hydroxyl group.     

用脉冲D2反应研究CeO2在Co-CeO2/SiO2费托合成催化剂中的促进作用机理

 采用脉冲D2反应研究了CeO2在Co-CeO2/SiO2费托合成催化剂中的作用机理. 通过比较在Co-CeO2/SiO2和Co/SiO2催化剂上的脉冲D2反应实验结果发现, CeO2可以提高载体表面 Si-OH 的H-D同位素交换活性和 Si-OH 中H参与CO加氢反应的活性; CeO2不仅增加了催化剂表面活性碳物种的总量,而且活性碳物种以链增长单体-CH2-为主,因而有利于增加费托合成反应速率和链增长几率; CeO2的加入明显提高了催化剂表面碳原子的加氢反应速率,从而减少了碳沉积.     

STUDY ON 1-HEXENE POLYMERIZATION BASED ON ZIEGLER-NATTA CATALYSTS WITH DOPED SUPPORT

A series of Ti/Mg supported catalysts are prepared by using ball-milled mixtures of MgCl2-ethanol adducts and NaCl as supports, and 1-hexene polymerizations catalyzed by the novel catalysts are studied. It is found that the molecular weight distribution of poly(1-hexene) becomes apparently narrower when catalysts with doped supports are used, indicating that changing the structure of the support is an effective way to regulate the active center distribution of heterogeneous Ziegler-Natta catalyst.     

Establishment of de facto standard catalysts in the polypropylene industry

Polypropylene (PP) has become an indispensable material in our daily lives. Annual worldwide production of PP is now more than 30000000 tons and is predicted to grow at an annual rate of about 6% during the first decade of the 21st century. Commercial production of PP began in 1957 with the use of TiCl(3) catalysts established by Ziegler and Natta. However, the low activities and low stereospecificities of the catalysts resulted in large amounts of catalyst residue and atactic PP in the product, necessitating steps for their removal in commercial production. As a means of finding appropriate catalysts, we developed MgCl(2)-supported TiCl(4) catalysts, which basic concept was introduction of organic compounds onto the inorganic crystal catalyst surface. This addition led to remarkable enhancements in stereospecificity with extremely high activity. Use of the new catalysts enlarged and simplified the PP production process by eliminating the steps previously required for removal of catalyst residue and atactic PP. In addition, it greatly improved the properties of the PP, enabling a much wider range of PP applications by replacing metal and engineering plastics with the highly stereoregular PP. Therefore, these catalysts helped the rapid establishment of the current PP industry and now play a major role in production. The latest MgCl(2)-supported TiCl(4) catalyst is providing precise control of the isotactic PP structure. Future expectations for this type of catalyst are to acquire a single-site nature and to contribute to the creation of a new class of hybrid materials.