Effect of silica-type sol-gel carrier’s structure and morphology on a supported Ziegler-Natta catalyst for ethylene polymerization

Silica xerogels with different structures and morphology, synthesized using a sol-gel procedure, were used as a carrier of vanadium catalysts (VOCl₃/AlEt₂Cl) for ethylene polymerization. Two techniques of catalyst synthesis were applied: slurry impregnation and gas-phase adsorption and the relevant polymerization methods were then employed. The effect of the carrier structure and morphology on the vanadium loading in the catalysts, the catalyst’s activity and kinetic stability were investigated.     

Formatation of pore structure in tape-cast alumina membranes – effects of binder content and firing temperature

Disc type ceramic aluminium oxide membrane has been prepared by tape casting technique. Thickness of this single layer membrane is in the range 200–300 μm. Porosity and pore size distribution have been determined by mercury porosimetry. Polymeric binder content of the green tape and the firing temperature are found to have strong influence on the average pore size, pore size distribution and overall porosity. Higher binder content promotes agglomeration of the ceramic particles, which on firing leads to wider pore size distribution and formation of closed pores. Pore coarsening is observed with increasing firing temperature.     

膦化聚2,6—二甲基1,4—苯醚负载钯催化剂的表征及其催化性能

报道了四种不同P/Pd摩尔比的膦化聚2,6-二甲基1,4-苯醚负载把催化剂的加氢和异构化性能;通过XPS、电镜和远红外对催化剂进行了表征;并考察了溶剂和温度对催化剂活性的影响.     

A new approach for fluorine determination by solid sampling graphite furnace molecular absorption spectrometry

This work deals with the determination of fluorine by solid sampling graphite furnace molecular absorption spectrometry. The molecular absorbance of aluminum monofluoride (AlF), which is produced in the vapor phase in the presence of Al³⁺, is measured at 227.5 nm, a non-resonant platinum line. A conventional graphite furnace program has been used with pyrolysis and vaporization temperatures of 800 and 2300 °C, respectively. Solutions of Ba²⁺ and Al³⁺ have been used to avoid fluorine losses during the pyrolysis stage and to produce AlF in the vaporization stage, respectively. Certified coal and alumina samples were analyzed using aqueous standards for calibration. The agreement between the found concentration and the certified value, or the value obtained by another method ranged from 92 to 105%, with a relative standard deviation less than 8.5%. The limit of detection and the characteristic mass was 0.17 μg g^− 1 and 205 pg, respectively.     

Ethylene polymerization over supported MAO/(nBuCp)2ZrCl2 catalysts: Influence of support properties

The catalytic system methylaluminoxane (MAO) and bis(n-butylcyclopentadienyl)zirconium dichloride ((nBuCp)₂ZrCl₂) was immobilized on commercial silica, silica-alumina and aluminophosphate calcined at different temperatures. The properties of the supports were determined by using N₂ adsorption-desorption isotherms at 77 K, FT-IR spectroscopy and SEM. After aluminium and zirconium impregnation, the catalysts were analyzed by ICP-AES, FT-IR and UV-vis spectroscopy. Ethylene polymerizations were carried out in a Schlenk tube at 70 °C and 1.2 bar of ethylene pressure. The polyethylene obtained was characterized by GPC, DSC and SEM.Catalysts supported on silica-alumina exhibited higher polymerization activity than those supported on silica and aluminophosphate. Besides, the activity of MAO/(nBuCp)₂ZrCl₂ catalytic system supported on silica-alumina and aluminophosphate decreased strongly with support calcination temperature, while remained almost constant when silica was employed as support. All these experimental features suggest a role of the support acid properties and hydroxyl group population in the generation of active polymerization species.     

负载型TiO2-聚酰亚胺亲水复合膜的制备与分离性能

采用溶解－流涎法，湿相转换法和干湿相转换法制轩了负载型ＴｉＯ２－聚酰亚胺亲水复合膜，采用扫描电镜，红外光谱，压汞和透气性实验等手段对该膜的孔径分布，表面结构及扩散性能进行了表征，并讨论了制备亲水对膜孔结构的影响，实验结果表明，三种膜均具有很好的亲水性能，而干湿相转换膜具有良好的孔径分布和分离性能。     

Role of carbonate-carboxylate species during alumina coking

The role of carbonate-carboxylate species on alumina surface has been studied during alumina coking. The species are intermediates poisoning the active sites. Little O₂ added to the hydrocarbon feedstock causes further oxidation of the species and promotion of the active sites.     

A practical synthesis of carbamates using an ‘in-situ’ generated polymer-supported chloroformate

A versatile method for the synthesis of carbamates from an ‘in-situ’ generated polymer-supported chloroformate resin is presented. BTC (bis-trichloromethyl carbonate) is used as phosgene equivalent to afford a supported chloroformate, which, by sequential ‘one-pot’ reaction with a variety of alcohols and amines, furnishes the corresponding carbamates in high yields and purities.     

用钛系载体高效催化剂进行乙烯-丙烯-1-丁烯三元共聚合的研究 Ⅰ.聚合条件对共聚合反应的影响

用多组份改性钛系载体催化剂TiCl_4,Ti(OBu)_4/MgCl_2/Ethylbenzeate(EB)/φ_2SiCl_2/AlEt_3进行了乙烯-丙烯-1-丁烯三元共聚合的研究。考察了单体进料比、聚合温度,烷基铝浓度和催化剂浓度等条件对共聚合的影响。发现本催化剂对乙丙丁三元共聚合有极高的催化效率,聚合1h达8.6×10~4g共聚物/g-Ti。共聚合速率衰减符合动力学方程:R_s=R_s+(R_0—R_s)_e~(βs)。     

La0.8Ca0.2MnO3纳米线的制备及表征

利用Sol-gel法结合氧化铝模板技术制备了La0.8Ca0.2MnO3纳米线, 并研究了两种热处理方法对 La0.8Ca0.2MnO3纳米线结构和形貌的影响. 快速升温到800 ℃得到的La0.8Ca0.2MnO3纳米线较粗, 其直径大于氧化铝模板的孔径, 而经过缓慢升温到400 ℃预处理再升温到800 ℃得到的La0.8Ca0.2MnO3纳米线, 其直径和氧化铝模板的孔径相当, 都约为35 nm. X射线衍射和透射电镜分析结果表明, 两种方法得到的 La0.8Ca0.2MnO3纳米线都是具有钙钛矿结构的属于单斜晶系的多晶材料.