基于流函数模型的矢量海流生成方法

提出了一种基于海洋流函数模型的双站高频地波雷达径向流生成矢量流算法.该算法避免了传统矢量合成法将径向流进行插值带来的误差,而且符合海洋动力学原理,生成的流场更接近实际分布.通过计算机仿真发现,流函数算法的容错、容差能力比矢量合成法更强.在径向流探测标准误差为10 cm.s-1时,新算法反演结果的均方根误差减小了约5 cm.s-1.应用到雷达实测数据中,与海流计实测结果比较表明,新算法比传统算法的平均误差减小了2 cm.s-1.     

直流电机的数字同步锁相

在某高速摄影机中,我们采用了同步数字锁相环路,本文叙述该机中直流电机的数字同步锁相原理及其所用数字相位误差积分器线路的构成。     

Electrical and photoelectrical studies of plasma polymerized acrylonitrile

The electrical and photoelectrical properties of plasma polymerized acrylonitrile (PAN) are reported. The polymer films were studied in silver-PAN-silver systems. Electrical conductivity at room temperature was of the order of 10⁻¹¹ ohm⁻¹ cm⁻¹. The space charge limited current (SCLC) studies at room temperature and thermally stimulated current studies (TSC) over a temperature range of 290–500°K led to a clear understanding of carrier concentration, carrier mobility, trapping levels and activation energies. Photoelectric measurements were used to draw a band picture in plasma depositedPAN.     

基于虚拟中心电流法的HL-2M快控电源数学模型

针对中国环流器2号M(HL-2M)装置中用于核聚变物理实验等离子体的垂直不稳定性控制的快控电源拓扑结构,充分考虑线圈的自感与互感对输出的影响,构建出数学模型,首次提出并运用虚拟中心电流法,使得控制算法更加简单,采用多输入多输出的控制方法,利用2个参量控制3个变量。本文基于基本供电方案得到多线圈耦合电压,基于快控电源拓扑推导出快控电源电路方程,再将其合并得到最终的线圈电压数学模型,最后进行仿真验证。结果表明数学模型搭建正确,为今后进行进一步计算提供了坚实的基础。     

The electronic properties and electron transport of sawtooth penta-graphene nanoribbon under uniaxial strain: ab-initio study

ABSTRACT

The electronic properties and electron transport of a sawtooth penta-graphene nanoribbon (SSPGNR) under uniaxial strains are theoretically studied by density-functional theory (DFT) in combination with the non-equilibrium Green's function formalism. We investigated the electronic structures and the current–voltage (I–V) characteristics of the SSPGNRs under a sequence of uniaxial strains in range from 10% compression to 10% stretch. In this strained range, carbon atoms still keep a pentagon network, but with the changing bond lengths. The C–C bond lengths change almost linearly with the tolerable strain. The value of the band gap of SSPGNRs can be depicted as a parabola under uniaxial strain. Our calculations show that the current is monotonous increase with compressive strain at the same applied bias voltage. In case of tensile strain, the variable rule of the current is different that it increases at first and decrease later. The fundamental physical properties (band structure, I–V characteristic) of SSPGNRs seem to be more sensitive to compressive strain than the stretch strain. The current intensity of the compressive-SSPGNR is by 2 orders of magnitude compared to that of the tensile-SSPGNR at the same strain in range from 6% to 10%. The results obtained from our calculations are beneficial to practical applications of these strained structures in SSPGNRs-based electromechanical devices.     

一种超导重力仪磁悬浮力的等效计算

为实现超导重力仪磁悬浮力的精确计算,以GWR型超导重力仪为模型基础,采用有限元的思想,将超导球表面电流理想化为多个等高共轴电流环,计算出各个电流环与超导线圈的作用力,求和得到线圈与超导球间的磁悬浮力。利用MATLAB完成计算程序实现,通过改变下线圈电流和上、下线圈电流比,获得满足一定条件的磁悬浮力及其梯度。选取合适的模型参数,计算出线圈对质量为m=4.069 g超导球的磁悬浮力大小为:Ftotal=3.988×10^-2N,磁悬浮力梯度为:-9.699×10^-3N/m,此时悬浮力梯度合适,满足系统稳定性和灵敏度的要求。     

用于测量毫微秒脉冲电流的磁通计

磁通计是一个被低电感电阻短路的自积分单匝线圈。由于它具有时间响应快,抗干扰能力强,不影响束流传输等优点,主要用于测量脉冲电子束加速器的二极管发射电流。同时,也可做为电流探针,用来监测其它快速变化的电流。     

Charge storage and relaxation process of polymer film by thermally stimulated discharge current technique

Charge storage and relaxation process of the polymide film electret were investigated using the thermally stimulated discharge current technique. Homo- and heterocharges were mainly observed up to and above the polarization temperature.     

多路Marx并联高压脉冲电源研究

脉冲功率技术在工业和生物医学领域有着广泛的应用,很多应用场合要求输出数百安培的高压脉冲。固态Marx发生器虽已研究多年,但是被广泛采用直插封装的IGBT和MOSFET功率半导体开关管的额定电流通常都低于100 A,无法满足低阻抗负载的应用需求。为提高输出脉冲电流幅值,提出两种多路Marx发生器并联的脉冲电源的拓扑结构,第一种方案采用多路Marx发生器直接并联,第二种是共用一组充电开关管的多路Marx发生器并联。由FPGA提供充放电控制信号,采用串芯磁环隔离驱动方案实现带负压偏置的同步驱动,主电路选用开通速度快、通流能力强的IGBT为主开关的半桥式固态方波Marx电路。实验结果表明,6路16级Marx直接并联的脉冲发生器能输出重频100 Hz高压方波脉冲幅值可达10 kV,在30 Ω负载侧输出峰值电流可达300 A,上升时间230 ns。共用充电开关管的6路4级Marx并联发生器在5 Ω电阻负载上的输出电流峰值可达300 A,最大输出电流可达460 A,上升时间272 ns。表明多路Marx发生器并联可以有效地减小系统内阻,提高系统带载能力;改进后的并联方案实现大电流脉冲输出的同时,所采用的开关管数量减小近一半,提高了系统的抗干扰能力的同时,降低了脉冲电源的成本;且增加级间并联导线可进一步改善均流效果。

     

一种脉冲强电流条件下导线电阻测量方法

在超强激光辐照电容线圈靶产生强磁场实验中,在约50 ps时,线圈电流达到20 kA以上。通过该实验结果与磁场产生理论模型对比,可得出该导线电阻值比常温直流电阻高出3个量级。对导线材料电阻率与趋肤效应的分析结果表明,该电阻值在量级上是合理的。获得超快脉冲强电流条件下的导线电阻值,有助于更深入理解线圈靶产生强磁场过程。