锌电极放电过程及失效机制数值分析

锌-空气电池是一种高能量的电池体系.实验表明, 在大功率工作条件下, 锌电极的材料利用率随电流密度的增加而急剧下降. 为探索其在大功率工作条件下的放电机理, 本文针对这一过程建立了一维数学模型, 通过数值求解模拟多个物理量如离子浓度、传递电流密度、电极孔隙度、固体氧化锌等在电极内部的分布变化情况, 在此基础上分析电极的性能. 数值结果分析表明, 固体氧化锌对电极内质量传输过程的限制是导致电极失效的根本原因. 其析出时间及在电极内部的集中分布位置对电极性能有显著影响; 而仅当其体积分数超过30%-35%的范围后才开始显著限制传质过程. 讨论了电极的优化措施, 模拟表明更高的溶液电导率,更大的电极孔隙度有利于增加大功率工作条件下电极的材料利用率. 但最重要的是保持电极内部氢氧根离子的浓度在一个较高的值,对于封闭式电极可以通过补液实现, 理想情况为设计一个电解液循环式的锌电极.     

N3/Al2O3/N749交替组装结构拓宽准固态染料敏化太阳能电池光响应范围和界面修饰效果

研究了染料敏化太阳能电池(DSCs)中N3/Al₂O₃/N749交替组装结构的作用. 该结构使用Al₂O₃作为介质层吸附第二层染料, 可以有效拓宽DSCs的光响应范围, 提高电池的光电转化效率. UV-Vis 吸收光谱和单色光转换效率(IPCE)谱测试结果表明, 相对于单一染料, 使用交替组装结构的电池光响应范围变宽. 电流-电压(I-V)曲线结果表明, 该结构有效增加了DSCs 电池的光电转化效率, 从单一N3 和N749 染料的4.22%和3.09%增加到了5.75%, 分别增加了36%和86%. 为了研究该结构的作用机理, 本文对其界面修饰作用及界面电子过程进行了讨论. 暗电流测试结果表明交替组装结构可以有效阻止电荷复合过程; 电化学阻抗谱(EIS)结果表明在黑暗条件下, N3/Al₂O₃/N749结构可以提高界面电阻, 从而抑制电荷复合过程; 本文建立了等效电路模型, 并使用该模型讨论了交替组装结构的界面电子过程; 调制强度光电流谱(IMPS)和调制强度光电压谱(IMVS)的结果表明该结构可以提高电子寿命和改善电子扩散.     

Start‐up of electrophoresis of an arbitrarily oriented dielectric cylinder

An analytical study is presented for the transient electrophoretic response of a circular cylindrical particle to the step application of an electric field. The electric double layer adjacent to the particle surface is thin but finite compared with the radius of the particle. The time‐evolving electroosmotic velocity at the outer boundary of the double layer is utilized as a slip condition so that the transient momentum conservation equation for the bulk fluid flow is solved. Explicit formulas for the unsteady electrophoretic velocity of the particle are obtained for both axially and transversely applied electric fields, and can be linearly superimposed for an arbitrarily‐oriented applied field. If the cylindrical particle is neutrally buoyant in the suspending fluid, the transient electrophoretic velocity is independent of the orientation of the particle relative to the applied electric field and will be in the direction of the applied field. If the particle is different in density from the fluid, then the direction of electrophoresis will not coincide with that of the applied field until the steady state is attained. The growth of the electrophoretic mobility with the elapsed time for a cylindrical particle is substantially slower than for a spherical particle.     

Joint Destruction of Cadmium and Copper at Alternating Current Electrolysis in Sodium Hydroxide Solution

The dependence of the metal oxidation rate on the current density and temperature of joint destruction in sodium chloride was studied. It is established that the dependence of the oxidation rate of copper is linear and generally do not differ from the dependencies established at individual oxidation of copper in the solution of sodium chloride with concentration 46.5% wt. In contrast to the oxidation rate of copper, the oxidation rate dependence of cadmium has extreme character and the oxidation rate of cadmium at its joint oxidation of copper increased in 2-3 times indicating that the mutual influence of electrodes at the electrochemical process with alternating current. Thus, the obtained dependences can predict operating electrolysis parameters a obtain copper-cadmium oxide system of the given composition.     

Activity of AC electrokinetically immobilized horseradish peroxidase

Dielectrophoresis (DEP) is an AC electrokinetic effect mainly used to manipulate cells. Smaller particles, like virions, antibodies, enzymes, and even dye molecules can be immobilized by DEP as well. In principle, it was shown that enzymes are active after immobilization by DEP, but no quantification of the retained activity was reported so far. In this study, the activity of the enzyme horseradish peroxidase (HRP) is quantified after immobilization by DEP. For this, HRP is immobilized on regular arrays of titanium nitride ring electrodes of 500 nm diameter and 20 nm widths. The activity of HRP on the electrode chip is measured with a limit of detection of 60 fg HRP by observing the enzymatic turnover of Amplex Red and H₂O₂ to fluorescent resorufin by fluorescence microscopy. The initial activity of the permanently immobilized HRP equals up to 45% of the activity that can be expected for an ideal monolayer of HRP molecules on all electrodes of the array. Localization of the immobilizate on the electrodes is accomplished by staining with the fluorescent product of the enzyme reaction. The high residual activity of enzymes after AC field induced immobilization shows the method's suitability for biosensing and research applications.     

Interplay of Hückel and Möbius Aromaticity in Metal-Metal Quintuple Bonded Complexes of Cr,Mo, and W with Amidinate Ligand: Ab initio DFT and Multireference Analysis**

The aromaticity of metal-metal quintuple bonded complexes of the type M₂L₂ (M=Cr, Mo, and W; L=amidinate) are studied employing gauge including magnetically induced ring current (GIMIC) analysis and electron density of delocalized bonds (EDDB). It is found that the complexes possess two types of aromaticity: i) Hückel aromaticity through delocalization of ligand π electrons with metal-metal δ-bond-forming 6 conjugated electrons (4π and 2δ) ring; ii) Craig-Möbius aromaticity through delocalization of π electrons of both the ligands with metal d-orbitals in Craig type orientation forming 10π electrons ring with a double twist. Extended transition state natural orbital chemical valence (ETS-NOCV) and canonical molecular orbital natural chemical shielding (CMO-NCS) analysis confirm the Craig-Möbius type arrangement of the orbitals. Furthermore, the unprecedented Hückel and Möbius type aromaticity is confirmed from the plot of the current pathways using 3D line integral convolution (3D-LIC) plots. The metal-metal bond order also increases down the group as justified from the complete active space self-consistent field (CASSCF) analysis. Due to an increase in the π and δ electron conjugation, both the Hückel and Möbius aromaticity increase down the group.     

Recent progress in separation prediction of counter‐current chromatography

As a liquid‐liquid partition chromatography, counter‐current chromatography has advantages in large sample loading capacity without irreversible adsorption, which has been widely applied in separation and purification fields. The main factors, including partition coefficient, two‐phase solvent systems, apparatus, and operating parameters greatly affect the separation process of counter‐current chromatography. To promote the applications of counter‐current chromatography, it is essential to develop theoretical research to master the principles of counter‐current chromatographic separations so as to achieve predictions before laborious trials. In this article, recent progress about separation prediction methods are reviewed from a point of the steady and unsteady state of the mass transfer process of counter‐current chromatography and its mass transfer characteristics, and then it is divided into three aspects: prediction of partition coefficient, modeling the thermodynamic process of counter‐current chromatography, and modeling the dynamic process of counter‐current chromatography.     

直流电晕充电下环氧树脂表面电位衰减特性的研究

介质材料表面电荷的积累和衰减行为是制约众多高压直流电力设备研制的关键因素. 薄片状介质试样的表面电荷密度与表面电位近似呈线性关系, 因此常通过表面电位衰减行为研究表面电荷的衰减特性. 基于电晕充电、表面电荷沉积和脱陷、介质体内单极性电荷输运等3个物理过程, 建立表面电位动态响应的物理模型. 通过计算环氧树脂的表面电位衰减行为, 得到栅极电压、相对介电常数和体电导率等对其表面电位衰减特性的影响. 栅极电压越高, 表面电位的衰减速度越快; 环氧树脂材料参数典型值(相对介电常数3.93, 体电导率10^-14 S· m^-1)下, 归一化表面电位的衰减速率随时间变化的曲线可拟合为分段幂函数, 其中, 分段幂函数的特征时间、指数系数与栅极电压分别呈幂函数和线性变化关系. 相对介电常数越大, 表面电位的衰减速度越慢; 环氧树脂相对介电常数典型范围(3–4)内, 表面电位衰减时间常数由1720 s增大到2540 s, 两者呈线性关系. 体电导率越大, 表面电位的衰减速度越快; 环氧树脂体电导率典型范围(10^-15–10^-13 S· m^-1)内, 表面电位衰减时间常数由24760 s 减小到260 s, 两者呈幂函数变化关系.     

太赫兹波段Smith-Purcell辐射的介质加载光栅高频特性

提出了一种用于Smith-Purcell效应器件的介质加载光栅慢波结构,通过研究该结构的注-波互作用过程,推导出带电子注的色散方程,并数值求解出波的线性增长率.利用色散方程,结合电磁场传播的边界条件,推导出Smith-Purcell效应振荡器工作所需的起振电流.详细研究了高频结构长度、电子注主要参数和介质相对介电常数对起振电流的影响,并与普通金属光栅结构进行了比较.结果表明:保持其他参数不变时,高频结构长度越短,起振电流越大;保持高频结构参数不变时,起振电流随电子注厚度和注-栅距离的增大而增大,随电子注电压的增大而减小;与金属光栅相比,介质的引入提高了注-波互作用的增长率,有效减小了振荡器的起振电流.理论计算结果与软件CHIPIC的模拟结果比较符合.     

硅单粒子位移损伤多尺度模拟研究

本文结合分子动力学方法和动力学蒙特卡罗方法, 研究了单个粒子入射硅引起的位移损伤缺陷的产生和演化过程; 基于Shockley-Read-Hall理论计算了单个粒子入射引起的位移损伤缺陷导致的泄漏电流增加及其演化过程, 比较了缺陷退火因子与泄漏电流退火因子之间的差异, 并将计算结果与实验值进行了对比. 结果表明, 计算泄漏电流时, 仅考虑一种缺陷的情况下缺陷退火因子与泄漏电流退火因子相同, 考虑两种缺陷类型情况下二者在数值上有所区别, 但缺陷退火因子仍能在一定程度上反映泄漏电流的退火行为. 分子动力学模拟中采用Stillinger-Weber势函数和Tersoff势函数时缺陷退火因子和泄漏电流退火因子与实验结果一致, 基于Stillinger-Weber势函数的计算结果与实验值更为接近.