Geometric and operational optimization of 20-kHz probe-type sonoreactor for enhancing sonochemical activity

The use of a 20-kHz probe-type sonicator irradiating downward in a 500 mL vessel was optimized for the enhancement of the sonochemical activity in terms of the geometric and operational factors. These factors included the probe immersion depth (the vertical position of the probe), input power, height of the liquid from the bottom, horizontal position of the probe, and thickness of bottom plate The sonochemical oxidation reactions were investigated both quantitatively and qualitatively using calorimetry, KI dosimetry, and luminol (Sonochemiluminescence, SCL) techniques. The sonochemical activity was very positively affected by the vertical boundaries. The highest sonochemical activity was obtained when the probe was placed close to the bottom of the vessel (immersion depth of 60 mm), with a high input power (input power of 75%), and optimal liquid height condition (liquid height of 70 mm). The SCL image analysis showed that the cavitational activity zone gradually expanded around the probe body and changed into a circular shape as the experimental conditions were optimized, and consequently the sonochemical activity increased. The formation of a large bright circular-shaped activity zone could be attributed to the strong reflections of the ultrasound firstly, at the vessel bottom and secondly, at the liquid surface. On the other hand, the cavitational activity zone and the sonochemical activity were negatively affected by the horizontal boundaries when the probe was placed close to the side wall of the vessel. In addition, it was found that the sonochemical activity was also significantly affected by the thickness of the support plate owing to the reflection and transmission of the ultrasound at the boundary between the liquid and the solid media.     

水平应力对顶板跨落角的影响及应用

为得到水平应力对顶板垮落角的影响,进而确定高位抽采钻孔布孔参数,采用理论分析及相似材料模拟实验的方法进行了研究。首先依据基本顶断裂位置围岩结构力学模型,将顶板岩层假设为梁结构,得到单一岩梁在不同水平应力作用下的断裂线位置变化规律。然后将各岩梁的断裂线位置叠加组合,得到水平应力对垮落角发育的影响。为验证理论分析结果,以水平应力值为影响因素设计了三组不同水平应力值条件下的双向加载相似材料模拟实验,得到了不同水平应力值对应的垮落角。研究结果表明:顶板垮落角由各岩梁断裂线位置决定。地基系数较小时,断裂线与地基初始接触位置距离随水平应力的增加表现为先减小后增加,垮落角变化规律同样为先减小后增加,但减小不明显;当地基系数增加时,随水平应力增加,断裂线与地基初始接触位置的距离减小趋势逐渐消除,仅表现为增加趋势,垮落角变化同样表现为增加趋势。现场应用表明,采用双向加载模型得到的垮落角对钻孔布置参数进行优化,优化后钻场抽采浓度及高浓度抽采时间均得到提高。     

Costas环在无线扩频定位系统中的应用技术研究

分析了扩频定位系统中载波恢复和数据解调数学模型，设计了环路中应用的Butterworth低通滤波器和产生正交两路信号的Hilbert变换滤波器，在Simulink中建立了Costas环仿真模型。结果表明：该Costas环能够准确地实现扩频定位系统的载波恢复和发送端数据解调输出，理论仿真和实际工程实验基本一致。     

航天器对接相对位置姿态自主测量方法研究

航天器间相对位置姿态的准确测量是实现自主自动对接的先决条件。将三圆标志靶安装在目标航天器上;追踪航天器用数码相机对靶拍照。设计了亚像素处理方法实时处理数字照片,可精确测定圆心像点位置和特征直径的像长;用其作为基本特征参数,基于透视投影原理,建立了求圆心物空间坐标的公式,求出靶面的平面方程,可用来求两航天器间的相对位置姿态参数和实时标定相机的可变参数。计算机仿真结果表明,测距为2m时,测圆心像点位置的误差小于0.03个像素,测距误差小于1mm,测姿态角的误差小于0.01°。该方法也适用于无人直升飞机定点着陆时自主测量其相对位姿参数。     

Theoretical Study on Thermodynamic Properties and Hydrophilicity of Polychorinated Phenothiazines （PCPTZs）

The thermodynamic properties of 135 polychlorinated phenothiazines (PCPTZs) in the standard state are calculated using a combination of quantum mechanical computations performed with the Gaussian 03 program at the B3LYP/6-311G** level, and their octanol-water partition coefficients (logKow) are calculated based on group contributions. The chlorine substitution pattern strongly influenced the thermodynamic properties and hydrophilicity of the compounds. The thermodynamic properties of congeners also depend on the chlorine substitution pattern. The effect of chlorine substitution pattern is quantitatively studied by considering the number and position of Cl atom substitution (NPCS). The results show that the NPCS model may be used to predict the thermodynamic properties and hydrophilicity for all 135 PCPTZ congeners.     

High-resolution infrared spectroscopy of NNO and NNO in the 1200–3500 cm region

We present a continuation of our investigation of the second most abundant isotopic species of nitrous oxide, ¹⁴N¹⁵N¹⁶O and ¹⁵N¹⁴N¹⁶O, in the infrared (IR). Our two previous contributions looked at the 3500–9000 cm⁻¹ region for ¹⁴N¹⁵N¹⁶O and ¹⁵N¹⁴N¹⁶O, respectively, in the 3500–9000 cm⁻¹ region. The use of highly enriched isotopologue samples in this study allowed us to go further into the IR, down to 1200 cm⁻¹. A total of 2 2742 transitions have been assigned based on the effective Hamiltonian model, with 108 of them being reported here for the first time. Rovibrational analyses of 98, 101, 8, 3, 6, 1 and 1 bands for the ¹⁴N¹⁵N¹⁶O, ¹⁵N¹⁴N¹⁶O, ¹⁵N¹⁵N¹⁶O, ¹⁴N¹⁵N¹⁸O, ¹⁵N¹⁴N¹⁸O, ¹⁴N¹⁵N¹⁷O and ¹⁵N¹⁴N¹⁷O isotopologues, respectively, were also performed.     

Rotation rate of a three-wing rotor illuminated by upward-directed focused beam in optical tweezers

The optical torque and the trapping position (focal point) in optical tweezers are analyzed for upward-directed focused laser illumination using a ray optics model, considering that laser light is incident at not only the lower surface but also the side surface of a 3-wing rotor. The viscous drag force due to the pressure and the shearing stress on all surfaces of the rotor is evaluated using computational fluid dynamics. The rotation rate is simulated in water by balancing the optical torque with the drag force, resulting in 500 rpm for an SU-8 rotor with 20 μm diameter at a laser power of 200 mW. The trapping position is estimated to be 7.6 μm in the rotor with an upward-directed laser at 200 mW via an objective lens having a numerical aperture of 1.4. Both the rotation rate and the trapping position agree well with the values obtained in the experiment.     

Design of the low energy beam transport line for the China spallation neutron source

The design of the China Spallation Neutron Source (CSNS) low-energy beam transport (LEBT) line, which locates between the ion source and the radio-frequency quadrupole (RFQ), has been completed with the TRACE3D code. The design aims at perfect matching, primary chopping, a small emittance growth and sufficient space for beam diagnostics. The line consists of three solenoids, three vacuum chambers, two steering magnets and a pre-chopper. The total length of LEBT is about 1.74 m. This LEBT is designed to transfer 20 mA of H-pulsed beam from the ion source to the RFQ. An induction cavity is adopted as the pre-chopper.The electrostatic octupole steerer is discussed as a candidate. A four-quadrant aperture for beam scraping and beam position monitoring is designed.     

Normality criteria for families of holomorphic mappings of several complex variables into

By applying the heuristic principle in several complex variables obtained by Aladro and Krantz, we shall prove some normality criteria for families of holomorphic mappings of several complex variables into , the complex N-dimensional projective space, related to Green's and Nochka's Picard type theorems. The equivalence of normality to being uniformly Montel at a point will be obtained. Some examples will be given to complement our theory in this paper.