On the Reaction of 3-Acetyl Coumarin with Alkyl Phosphites. Structural Confirmations Based on X-Ray Crystallography

3-Acetyl coumarin ( 1 ) reacts with dialkyl phosphites at 100°;C for 8 h to give the phosphonates 2 . Under the same experimental conditions, 1 reacts with trialkyl phosphites to form a mixture of the phosphonates 2 and 3 . The molecular structures of these products were elucidated by x-ray crystallography.     

The side chain effects on TPD-based copolymers: the linear chain leads to a higher jsc

Abstract

Alkyl substituents appended to polymers play the determining role on self-assembly and film-forming properties, and on device performance. In this work, we highlight the effects of the linear and branched flexible chains appended to the acceptor moiety (A) in D-A type copolymers. Two thieno[3,4-c]-pyrrole-4,6-dione (TPD) based copolymers PT1 and PT2 with different alkyl chains, were designed and synthesized. By comparison their UV-vis absorptions, HOMO/LUMO energy levels, as well as the characters in polymer solar cells, the influences of alkyl chains were investigated. Both copolymers showed molecular weights of 21?kDa and similar optical properties with a medium band gap of 1.93?eV, while PT2 with the branched chain exhibited a lower HOMO than that of PT1 (?5.43 vs???5.37?eV). In bulk heterojunction (BHJ) solar cells, PT1 with a linear chain presented a short circuit current (J_sc) of 6.76?mA cm^?2, open circuit voltage (V_oc) of 0.89?V and power conversion efficiency (PCE) of 2.92%. To the contrary, PT2 showed a J_sc of 3.53?mA cm^?2, V_oc of 0.99?V, delivering a relatively lower PCE of 2.05%. The result indicates that appending a linear alkyl chain to the TPD unit could sufficient enhance the J_sc value of the related polymer.     

烷基聚葡糖苷溶液的表面吸附平衡与动力学

用吊片法和气泡最大压力法分别测定了烷基聚葡糖苷(APG)C₉.₆G_1.3水溶液的平衡和动态表面张力,研究了APG水溶液表面的吸附平衡、动力学及其影响因素.测得其cmc(临界胶束浓度)为0.032g/L.吸附过程由初始的扩散控制转变到势垒控制,吸附势垒为4～7kJ/mol.温度升高,平衡和动态表面张力均减小,吸附量增加;加入无机盐,平衡和动态表面张力增大,吸附量亦增加;醇类的吸附使动态表面张力下降速率加快,表明APG与醇分子间有协同吸附作用.     

A Study of the Relationship between Alkyl Substituents,Position of Substituents,and the Fluorescence Lifetimes of Phenyl-N-Methylcarbamates

Abstract

Empirical data is presented to describe the relationship between the fluorescence lifetimes (τ_f) and the position of substituents on the parent molecule, Phenyl-N-Methylcarbamate. The fluorescence lifetimes are determined using time correlated single photon counting technique¹. It is found that increasing lifetimes with position of substitution follows the order, meta > para > ortho in the case of mono-alkyl substituted carbamates. Also, the results below indicate that the long fluorescence lifetime of 4-Dimethylamino-3,5-Xylyl-N-Methylcarbamate, τ_f 108 ns² originates from an n-II? lowest excited state and not the usual II-II? lowest excited states of the other N-Methylcarbamates studied.     

Speed of Sound, Isentropic Compressibilities, and Excess Molar Volumes of Binary Mixtures Containing p-Dioxane

The speed of sound u in and densities of eight binary mixtures of p-dioxane (p-C₄H₈O₂) with methylcyclohexane (c-C₆H₁₁CH₃), 1-chlorohexane (C₆H₁₃C1), 1-bromohexane (C₆H₁₃Br), p-xylene [C₆H₄(CH₃)₂], propylbenzene (C₆H₅C₃H₇), methyl acetate CH₃COOCH₃), butyl acetate (CH₃COOC₄H₉), and amyl acetate (CH₃COOC₅H₁₁) were measured over the whole composition range at 30°C. Isentropic compressibilities (K _S), Rao's molar sound functions (R), excess molar volumes (V ^E), excess isentropic compressibilities (K _S ^E ) together with relative change in volume V/₁₂ values, have been obtained for all measured mole fractions. The excess partial molar volume (V₁-V ₁ ⁰ ) of p-dioxane in different solvents have also been estimated. The experimental results have been analyzed in terms of the Prigogine–Flory–Patterson theory of solutions.     

Analysis of alkyl sulfonates and carboxylates using high performance ion chromatography

Summary A simple and general method for the determination of both C₁−C₁₀ alkyl sulfonates and alkyl carboxylates using the same basic methodology, based on High Performance ion Chromatography, using relatively simple eluent systems allowing fast analysis with both high sensitivity and accuracy is presented.     

十四烷基芳基磺酸盐形成的分子有序组合体

以表面张力法、碘光谱法、水增溶法和相态图法研究了自制的三种十四烷基芳基磺酸盐在不同条件下形成的分子有序组合体(胶束、反胶束和微乳液),并考察了分子结构、溶剂、无机盐和短链醇等对其的影响.结果表明:增加十四烷基芳基磺酸盐分子亲油基支化度,不利于其在水溶液或混合极性溶剂(乙二醇-水)中形成胶束而有利于其在非极性溶剂正庚烷中形成反胶束;溶剂极性的降低,促使表面活性剂溶液由胶束溶液→单体溶液→反胶束溶液转变;无机盐或短链醇的加入促进了水溶液中胶束的形成,且反离子价态数或醇烷基碳原子数越大,越有利于胶束形成;无机盐浓度的增加导致表面活性剂/正丁醇/正辛烷/NaCl/水形成的微乳液体系在一定温度下发生由WinsorI→WinsorIII→WinsorII型的转变.     

Poly(divinylbenzene-alkyl methacrylate) monolithic stationary phases in capillary electrochromatography

In this study, a series of poly(divinylbenzene-alkyl methacrylate) monolithic stationary phases, which were prepared by single step in situ polymerization of divinylbenzene and various alkyl methacrylates (butyl-, octyl-, or lauryl-methacrylate), were developed as separation columns of benzophenone compounds for capillary electrochromatography (CEC). In addition to the presence of plenty of benzene moieties, the stationary phases contained long and flexible alkyl groups on the surface. With an increase in the molecular length of alkyl methacrylate, the polymeric monolith, which had higher hydrophobicity, effectively reduced the peak tailing of benzophenones, but a weaker retention was observed. The unusual phenomenon was likely due to the π–π interaction between the aromatic compound and the polymeric material. The usage of longer alkyl methacrylate as reaction monomer limited the retention of aromatic compounds on the stationary phase surface, thus the π–π interaction between them was possibly reduced. Consequently, the retention time of aromatic compounds was markedly decreased with an increase in carbon length of alkyl methacrylate that was carried on the polymeric monolith. Compared to previous reports on polystyrene-based columns in which the peak-tailing problem was reduced by decreasing the benzene moieties on the stationary phase, this study demonstrated that the undesirable retention (peak-tailing) could also be improved by the inclusion of long alkyl methacrylate to the polystyrene-based columns.     

含硫醚结构均苯型聚酰亚胺的合成及表征

以4,4′-二氨基二苯硫醚(SDA)和均苯四酸酐(PMDA)为原料,通过溶液缩聚法-热酰亚胺/化学酰亚胺化的方法制备了一种含硫醚结构均苯型聚酰亚胺.利用高级旋转流变仪建立了在线跟踪反应进程的方法,采用热失重分析仪研究反应条件对热酰亚胺化及化学酰亚胺化法的影响,这些方法的建立为进一步制备高性能的聚酰亚胺提供有效的实验手段.采用小角激光光散射法、红外光谱、元素分析、接触角仪、DSC等方法对聚合物的结构与性能进行表征.结果显示,硫醚结构的引入,可有效改善聚合物薄膜的表面性能,其与铜箔之间的粘附功明显大于传统聚酰亚胺,在无胶挠性线路板应用方面显示出较好的应用前景.所获聚合物的Mw为(6.7±1.6)×104,分解温度均高于560℃;DSC的结果显示所制备的两种酰亚胺化聚合物均具有较高的玻璃化转变温度,相比之下,化学酰亚胺化更有利于获得高酰亚胺化程度的聚合物,产物的玻璃化转变温度也更高.     

聚丙烯酰胺对烷基苯磺酸盐界面吸附膜扩张流变性质的影响

采用小幅低频振荡和界面张力弛豫技术, 研究了部分水解聚丙烯酰胺(Mo-4000)和阴离子表面活性剂2-丙基-4,5-二庚基苯磺酸钠(377)体系在癸烷/水界面上的扩张黏弹性质, 并考察了电解质对体系界面流变性质的影响. 研究结果发现, 低表面活性剂浓度时, 聚合物的加入大大降低了扩张模量; 而高表面活性剂浓度时, 聚合物的存在导致了界面膜更接近弹性膜. 一方面电解质压缩双电层, 增加界面膜的紧密程度, 造成高频条件下扩张模量增大; 另一方面, 电解质增强表面活性剂分子在界面与体相间的扩散交换作用, 增大了扩张模量的频率依赖性, 造成低频条件下扩张模量降低.