Optical investigation of the red band emission of CdS nanoparticles

Cadmium sulfide (CdS) nanoparticles, with different Cd/S molar ratios, were chemically produced and characterized in this study. High quality CdS nanoparticles were grown in the hexagonal phase, as indicated by X-ray diffraction data and Raman spectroscopy. Photoluminescence was used to investigate the surface effects caused by submitting the nanoparticle-based samples at different laser treatments and vacuum pressure.     

Hydrothermal synthesis of Er-doped yttria nanorods with enhanced red emission via upconversion

(Y_0.95Er_0.05)₂O₃ single-crystalline nanorods with intense red emission via up-conversion are synthesized by a hydrothermal method under modest reaction conditions. Green and red emissions are observed for both as-synthesized sample and post-treated sample after excitation at 488 nm and with upconversion pumping (810 nm). The experimental results indicate that the stokes and up-conversion luminescence of the post-treated (500 °C for 2 h) Y₂O₃:Er nanorods is more efficient than those of as-prepared materials. The increase of the Stokes luminescence may result from the improved crystallization, smooth surface and uniform diameter distribution. The enhanced red emission via upconversion is due to removal of part of surface contaminants, such as CO₃²⁻ and OH⁻. It is believed that a new mechanism is responsible for populating the ⁴S_3/2 and ⁴F_9/2 levels.     

Living fluids

One of the major emerging fields of research of the beginning of this century concerns living fluids. By “living fluids”, we mean two major categories of complex fluids: (i) fluids which are essential to life, like blood, and (ii) active fluids made of particles that are able to propel themselves in the suspending fluid by converting a form of their energy into mechanical motion. Studies on active fluids have known a considerable interest since the last decade. Blood might be viewed as an old topic, but the progresses in experimental techniques, analytical concepts and numerics, have contributed nowadays to a dramatic renewal of the interest in this field, with a great potential towards understanding physical and mechanical factors in cardiovascular diseases. These fields have considerably strengthened interdisciplinary research. The series of reviews of this dossier focus on the tremendous recent progress achieved in research on living fluids both from the experimental and theoretical points of views. These reviews present also the major open issues, making of this dossier a unique guide for future research in these fields. This project grew up thanks to the international summer school that we organized on the topic “living fluids” at the IES (Institut dʼétudes scientifiques) of Cargèse (Corsica) in 2012.     

中国红层的分布及地质环境特征

根据我国红层的分布特征及形成背景 ,将我国红层划分为西南地区红层、西北地区红层、中南、东南地区红层和其他地区 (西藏及华北的部分地区 )红层。重点研究了以川滇红层为代表的西南地区红层和以甘肃红层为代表的西北地区红层 ,研究了各个区域红层的地质构造特征、地形地貌特征、气候环境特征等工程地质环境特征 ,根据工程地质环境特征 ,将研究区域的红层划分为四川盆地红层、西昌—滇中红层、滇西红层和甘肃红层.     

红粘土的微结构及其概化模型

本文论述红粘土的物质组成和微结构特征,在此基础上提出了红粘土微结构的概化模型,并根据这种模型对红粘土的工程特性进行了探讨。     

Pure red electrophosphorescence from polymer light-emitting diodes doped with highly emissive bis-cyclometalated iridium(III) complexes

In order to develop highly emissive red phosphorescent materials for OLED application, novel bis-cyclometalated iridium(III) complexes were developed using the 1-(dibenzo[b,d]furan-4-yl)isoquinolinato-N,C^3′ (dbfiq) cyclometalating ligand. When 1,3-bis(3,4-dibutoxyphenyl)propane-1,3-dionate (bdbp) is employed as an ancillary ligand, Ir(dbfiq)₂(bdbp) 1 exhibits red photoluminescence (PL) at 640 nm with a quantum yield (Φ_PL) of 0.61 (in toluene, 298 K). Replacement of bdbp to dipivaloylmethanate (dpm) and acetylacetonate (acac) (Ir(dbfiq)₂(dpm) 2 and Ir(dbfiq)₂(acac) 3, respectively) does not affect the PL spectrum, but reduces Φ_PL to 0.55 and 0.49 for 2 and 3, respectively. Similar tendency is also found in the doped poly(methyl methacrylate) (PMMA) film, and 1 is more emissive (Φ_PL = 0.17) than 2 and 3 (Φ_PL = 0.08 and 0.06, respectively). Using 1 as a phosphorescent dopant, polymer light-emitting diodes (PLEDs) were fabricated, of which structure was ITO/PEDOT:PSS (40 nm)/PVCz:1:PBD (100 nm)/CsF (1 nm)/Al (250 nm). Pure red electroluminescence (EL) is obtained from the fabricated PLEDs, affording a CIE chromaticity coordinate of (0.68, 0.31). When 0.51 mol% of 1 is incorporated in the PVCz-based emitting layer, the PLED shows maximum luminance of 7270 cd m⁻² at 16.5 V, power efficiency of 1.4 lm W⁻¹ at 7.5 V, and external quantum efficiency of 6.4% at 9.0 V. PLEDs with the same structure and components were also fabricated using 2 and 3, and their device characteristics were investigated. In proportion to the PL quantum yields, 1 affords better device performance than 2 and 3. Owing to four butoxy groups introduced to the bdbp ligand, 1 exhibits high solubility in organic solvents such as chloroform and toluene, and thus, is an excellent red phosphorescent dopant for solution-processed OLEDs.     

胶束增敏分光光度法水相测定乳制品中三聚氰胺

建立了一种基于胶束增敏缔合反应水相测定乳制品中三聚氰胺的分光光度法,研究了在阴离子表面活性剂十二烷基硫酸钠(SDS)形成的胶束体系中,茜素红(AR)阴离子与三聚氰胺阳离子反应产物的紫外-可见光谱特性。实验发现,加入三聚氰胺后,体系λmax由426nm红移到516nm,加入SDS对缔合物有显著的增稳、增敏效应。三聚氰胺质量浓度在1.9～25mg/L范围内符合比尔定律,缔合物的表观摩尔吸光系数为6.9×103L.mol-1.cm-1。本方法用于液态奶及奶粉中三聚氰胺的测定,回收率分别为94.5%～104.8%和95.5%～100.4%,相对标准偏差分别为1.6%～2.2%和1.7%～2.6%。考察了酸效应、胶束对体系的作用机理,发现三聚氰胺与AR缔合物之间主要是通过静电引力和疏水作用力相结合。     

甲酚红褪色分光光度法测定吡罗昔康

用褪色分光光度法(测定药物制剂和生物样品中吡罗昔康含量。)在pH8.75的tris-HCl缓冲溶液中,甲酚红与吡罗昔康反应形成离子缔合物,使甲酚红溶液褪色,最大褪色波长位于570nm,吡罗昔康浓度在0.06628～11.60μg/mL范围内遵循比尔定律,回归方程为ΔA=0.1404c+0.0067,相关系数为r=0.9996,表观摩尔吸光系数为4.703×104L·mol-1.cm-1。据此建立了方法,样品测定平均回收率为97.51%～101.4%。     

Solid-solution red phosphors for white LEDs

Solid solutions of Eu³⁺-doped metal tungstate and molybdate phosphors were synthesized by solid-state reactions. The crystal structure of the solid-solution phosphors was determined to be tetragonal with a space group of I4₁/c. The red-emitting solid-solution phosphors exhibited a broad absorption band in the range 220-340 nm and sharp excitation peaks in the near UV to green region. The emission intensities of the solid-solution phosphors were enhanced due to the stiff lattices, as a result of the ordered distribution of cations and anions according to differences in ionic size. The increase in the energy transfer is discussed in terms of metal-ligand distances, ionization potential of Mo and the relatively large overlap between the excitation and emission spectra. Such solid-solution phosphors with a bright red emission intensity, relatively short decay time and appropriate color chromaticity have potential for use as red-emitting materials for white LEDs.     

Preparation and luminescence properties of SrTiO3:Pr,Al phosphor from the glycolate method

Spherical SrTiO₃:Pr³⁺,Al³⁺ phosphor with high crystallinity and uniform particle size distribution was formed from the glycolate precursor. The glycolate precursor was obtained by heating the mixed solution of metallic nitrates and titanium oxychloride in ethylene glycol up to 200 °C. The thermal decomposition of the glycolate precursor proceeded through three major stages, i.e., (i) evolution of glycols (∼200 °C), (ii) decomposition of glycolate precursor, and (iii) decomposition of strontium carbonate and crystallization of SrTiO₃:Pr³⁺,Al³⁺ phosphor.SrTiO₃:Pr³⁺,Al³⁺ phosphor exhibited a strong red emission, peaking at about 617 nm. SrTiO₃:Pr³⁺,Al³⁺ phosphor obtained from the glycolate complex has higher luminescent properties than the conventional solid state reaction and the Pechini method in terms of photoluminescence (PL) and cathodoluminescence (CL). High crystallinity, low residual carbon content and small grain size with uniform shape would enhance the luminescence intensity of phosphor by the glycolate method due to high surface area per unit volume and low organic content compared with the Pechini method. Also, Al³⁺ ion is more effective than Ga³⁺ ion to enhance PL intensity of SrTiO₃:Pr³⁺,Al³⁺ phosphor because of smaller Al³⁺ ion radius. Therefore, the glycolate method has been demonstrated to be a convenient and unique process for the production of muticomponent oxide with smaller grain size and higher crystallinity compared with the conventional mixed oxide reaction and the polymer precursor method.