Silver(I)‐Selective PVC Membrane Potentiometric Sensor Based on a Recently Synthesized Calix[4]arene

A new PVC membrane potentiometric sensor for Ag(I) ion based on a recently synthesized calix[4]arene compound of 5,11,17,23‐tetra‐tert‐butyl‐25,27‐dihydroxy‐calix[4]arene‐thiacrown‐4 is developed. The electrode exhibits a Nernstian response for Ag(I) ions over a wide concentration range (1.0×10^?2?1.0×10^?6 M) with a slope of 53.8±1.6 mV per decade. It has a relatively fast response time (5–10 s) and can be used for at least 2 months without any considerable divergence in potentials. The proposed electrode shows high selectivity towards Ag⁺ ions over Pb²⁺, Cd²⁺, Co²⁺, Zn²⁺, Cu²⁺, Ni²⁺, Sr²⁺, Mg²⁺, Ca²⁺, Li⁺, K⁺, Na⁺, NH₄⁺ ions and can be used in a pH range of 2–6. Only interference of Hg²⁺ is found. It is successfully used as an indicator electrode in potentiometric titration of a mixture of chloride, bromide and iodide ions.     

Hydrothermal synthesis, characterization and thermochemistry of Ca2[B2O4(OH)2]·0.5H2O

A pure calcium borate Ca₂[B₂O₄(OH)₂]·0.5H₂O has been synthesized under hydrothermal condition and characterized by XRD, FT-IR and TG as well as by chemical analysis. The molar enthalpy of solution of Ca₂[B₂O₄(OH)₂]·0.5H₂O in HC1·54.582H₂O was determined. From a combination of this result with measured enthalpies of solution of H₃BO₃ in HC1·54.561H₂O and of CaO in (HCl + H₃BO₃) solution, together with the standard molar enthalpies of formation of CaO(s), H₃BO₃(s) and H₂O(l), the standard molar enthalpy of formation of −(3172.5 ± 2.5) kJ mol⁻¹ of Ca₂[B₂O₄(OH)₂]·0.5H₂O was obtained.     

Second crystal modification of 1,10-diazonia-18-crown-6 dichloride

The second crystal modification (II) of 1,10-diazonia-18-crown-6 dichloride [H₂DA18C6]²⁺·2Cl^?, where [H₂DA18C6]²⁺ is the 1,10-diaza-18-crown-6 dication (DA18C6) with two protonated nitrogen atoms, was investigated by XRD. The monoclinic modification (II) (space group P2₁/n, a = 9.600 Å, b = 5.689 Å, c = 15.749 Å, β = 91.03°, Z = 2) was solved by direct methods and refined by full-matrix least squares analysis in an anisotropic approximation to R = 0.032 for all 2494 independent reflections collected (CAD-4 automatic diffractometer, λMoK _α). In modification II, the conformation of the DA18C6 dication and the ion packing differ from those in triclinic modification I investigated previously.     

γ辐照引发无皂乳液聚合法一步合成Ag-聚4-乙烯基吡啶杂化微凝胶

无机-聚合物纳米复合材料是将聚合物与一种或多种无机纳米粒子复合而成的一种材料,它同时具有无机纳米粒子和聚合物的优良特性,在许多重要技术领域具有广泛的应用前景.近20年来,无机-聚合物纳米复合材料的制备及应用备受关注[1~6].包括杂化微凝胶在内的纳米复合微球是无机-聚合     

微波衍生-离子对高效液相-磺化四苯基卟啉光度法同时测定痕量镍、铜、锰和锌

 用磺化四苯基卟啉 (TPPS4 )作柱前衍生试剂 ,在微波作用下进行衍生反应 ,研究了衍生和分离Ni2 + ,Mn2 + ,Zn2 + 和Cu2 + 的最佳条件。在 75 0W的微波作用下衍生反应 3min ,在C18柱上采用乙腈 水 (体积比为 2 2 5∶77 5 )体系作流动相 ,四乙基溴化铵 (TEABr)作离子对试剂 ,在 415nm处检测 ,建立了微波衍生 离子对高效液相快速分离、光度检测Ni2 + ,Mn2 + ,Zn2 + 和Cu2 + 的新方法。络合物和反应试剂在 15min内出峰完毕。Zn2 + ,Cu2 + ,Ni2 + 和Mn2 + 的检测限分别为 0 0 5 μg/L ,0 0 1μg/L ,0 10 μg/L和 0 40 μg/L。     

CeO2和Pd在Ni/γ-Al2O3催化剂中的助剂作用

采用脉冲微反技术研究了添加n型半导体氧化物CeO2及贵金属Pd对Ni/γ Al2O3催化剂上CH4积炭/CO2消炭反应性能的影响,并运用BET、TPR、CO2 TPSR及氢吸附等技术对催化剂进行了表征.结果表明, n型半导体氧化物CeO2的添加可以降低Ni/γ Al2O3催化剂上CH4裂解积炭活性,提高CO2消炭活性,添加少量贵金属Pd可以进一步改变载体Al2O3、助剂CeO2和活性组分Ni之间的相互作用,从而改善Ni/γ Al2O3催化剂的抗积炭性能.通过Ni Ce Pd/γ Al2O3催化剂上CH4积炭/CO2消炭模型对上述作用机制作出了新的解释.     

Adaptation of Cu/ZnO/Al_2O_3 to Temperature Change in Methanol Synthesis from CO_2 Hydrogenation

The induction behavior in CO2 hydrogenation was studied by varying the reaction temperature to investigate the adaptation of the Cu/ZnO/Al2O3 catalyst to the temperature change. The results indicated that a used catalyst had a tendency to keep the last running state in new reaction conditions for MeOH formation, and that this tendency was related to the difference in Cu/Cun+ ratio caused by CO2 and CO produced at different reaction temperatures. However, the reverse water-gas shift reaction (RWGS) induced at four temperatures was completely different from that of methanol synthesis. It implied that the two so-called competitive reactions in CO2+H2, RWGS and methanol synthesis, have different active centers.     

压力和温度对4-甲基二苯并噻吩和二苯并噻吩加氢脱硫反应的影响

研究了4-甲基二苯并噻吩(4-MDBT)和二苯并噻吩(DBT)在CoMo/γ-Al2O3上的加氢脱硫反应产物分布及其可能的反应网络,通过反应压力和温度对产物分布影响的研究,揭示了加氢脱硫反应的可能机理。研究发现4-MDBT在CoMo/γ-Al2O3上的加氢脱硫反应主要通过直接氢解路径和加氢路径进行,且两者反应速率相当；DBT在 CoMo/γ-Al2O3上的加氢脱硫反应主要通过直接氢解路径进行。4-MDBT分子位于4位的甲基阻碍其在催化剂表面通过硫原子的端连吸附,从而降低了其直接氢解脱硫路径的反应速率,因而也降低了其总的加氢脱硫转化率。反应压力降低,DBT和4-MDBT加氢脱硫反应中加氢路径反应速率明显下降,而其对氢解路径影响较小,但效果却与加氢路径相反,反应压力对4-MDBT转化率的影响大于DBT。反应温度对DBT和4-MDBT加氢脱硫反应中加氢路径和氢解路径都有明显影响,但是对DBT加氢脱硫反应中氢解路径的影响小于加氢路径,而对4-MDBT加氢脱硫反应中氢解路径的影响稍高于加氢路径,4-MDBT分子中甲基的供电子作用有利于相连苯环的加氢反应。     

加料方式对CuO/ZnO/Al2O3系催化剂前驱体性质的影响

用XRD、TG-DTG、TPR技术研究了不同加料方式对CuO/ZnO/Al2O3系催化剂前驱体物相组成及其结晶情况的影响，用加压微反装置考察了催化剂合成甲醇反应活性。结果表明, 加料方式对Cu2+形成的中间化合物的物相组成及结晶度影响显著,对Zn2+及Al3+的沉淀物相的影响很小。不同加料方式对催化剂前驱体物相组成及催化剂性能的影响主要是形成的初始前驱体中Cu的物相及结晶度不同。正加法主要形成Cu2(OH)3NO3,并流法主要形成无定形Cu2CO3(OH)2,后者与Zn5(CO3)2(OH)6相互作用转化为(Cu,Zn)2CO3(OH)2和（Cu,Zn）5(CO3)2(OH)6，由它们分解形成的CuO-ZnO固溶体是合成甲醇反应的活性相。并流法能最大程度的形成CuO-ZnO固溶体，有利于CuO粒子的细化，其催化活性较好。     

5-芳胺-4,7-吲唑二酮的合成

以1,4-对醌、芳肼为原料,通过Aza-Nenitzescu反应、氧化银氧化得到吲唑醌,亲核试剂(各种芳香胺)在Ce3 催化下与吲唑醌发生迈克尔加成反应,得到一系列5-芳氨基基取代的吲唑醌.化合物结构经元素分析、IR及1H NMR证实.初步的生理活性研究表明,这些化合物具有良好的抗哮喘活性.