Investigation of hydrogen embrittlement of Sn–Al alloy during contact with water vapour

The humid air induced processes of embrittlement of the Sn–Al alloy and hydrogen emission have been investigated. Using the secondary-ion mass spectrometry, X-ray, scanning electron microscopy and energy-dispersive X-ray spectrometry techniques it was found that the brittleness is caused by a failure of phase adhesion due to accumulation of hydrogen and formation of oxidized layers on phase boundaries during contact of the alloy with water vapour. Specific physical and electrochemical properties of the Sn/Al phase boundary satisfy conditions for the formation of atomic hydrogen and its reaction with Sn. Electrochemical corrosion plays an important role at the stage of formation of atomic hydrogen. The penetration of hydrogen and its accumulation in the bulk of the alloy is due to the high energy of the phase boundary and the low energy of formation of unstable tin hydride. Electronic Publication     

Thermal analysis in the synthesis and crystal formation of oxides

Vapour phase treatment at elevated temperatures with an activating agent is an effective method of synthesis and purposeful modification of amorphous and fine-grained crystalline substances. In the systems amorphous silica-quartz and amorphous Al(OH)₃ -crystalline-Al₂O₃ different forms of bound water are of prime importance. DTA, TG, DSC, NMR¹H,²⁹Si,²⁷Al, IR spectroscopy, electron- and optical microscopy methods have been used. The interaction of water molecules with the base skeleton and with hydroxide groups on the surface and in the bulk of the silica is of primary significance for modification of the silica structure. The proportion of different forms of the bound water determines the integral evaporation enthalpy of water. Various properties of silica are determined by weak bound water in the surface layer of the material. In the sequence Al(OH)₃ —-Al₂O₃ the structure transformation is observed according to the following scheme:-Al(OH)₃ —-AlOOH- -Al₂O₃, which takes place during the vapour phase treatment with activator.

---

Zusammenfassung Eine Dampfphasenbehandlung bei höheren Temperaturen mit einem Aktivierungsmittel ist eine effektive Methode zur Synthese und zielgerichteten Modifizierung von amorphen und feinkörnigen kristallinen Substanzen. In den Systemen amorphes Siliziumdioxid-Quarz sowie amorphes Al(OH)₃-kristallines-Al₂O₃ hat verschiedenartig gebundenes Wasser eine primäre Bedeutung. Bei den Untersuchungen kamen DTA, TG, DSC,¹H-,²⁹Si-,²⁷Al-NMR, IR-Spektroskopie sowie Elektronen- und optische Mikroskopie zur Anwendung. Die Wechselwirkung von Wassermolekülen mit dem Grundgerüst und mit Hydroxidgruppen an der Oberfläche und im Innern von Silika ist für die Modifizierung der Silikastruktur von primärer Bedeutung. Der Anteil der verschiedenartig gebundenen Wasserformen bestimmt die vollständige Verdampfungsenthalpie des Wassers. Die verschiedenen Eigenschaften von Silika werden durch schwach gebundenes Wasser in der Oberflächenschicht der Substanz bestimmt. Die Umwandlung Al(OH)₃ —-Al₂O₃ durchläuft folgendes Schema:-Al(OH)₃--AlOOH--Al₂O₃, nach dem der Vorgang bei der Gasphasenbehandlung mit Aktivator abläuft.

     

甲醇氨化反应中交联皂石的催化行为

层柱材料是具有规则孔结构且其表面酸性及孔结构可调变的固体酸催化剂.本文合成了皂石,并用十三聚铝羟基络离子(Al_(13))与其交联,在醇氨化反应中研究了此层柱材料孔结构及表面酸性与催化性能间的关系.     

2-十四烷基-DTPA及其钆(Ⅲ)螯合物的合成与表征(英)

Synthesis and characterization of the ligand, [2-tetradecyl-3,6,9-tris(carboxymethyl)-3,6,9-triazaundecan-1,11-dioic acid, H₅L] and its Gd(Ⅲ) chelate are described. Protonation constants for H₅L (lgK_i^H = 10.80, 8.40, 4.30, 2.80, 2.15) and the stability constant for GdL^2- (lgK_GdL^2-= 22.75) were determined by potentiometric titration and are similar with the related values of DTPA and Gd-DTPA respectively. The results obtained show that the basicity of the ligand and the stability constant of its Gd(Ⅲ) chelate are not obviously altered after introduction of a linear chain tetradecyl group at the terminal acetic acid residue of DTPA.     

α-Al2O3纳米粒子对Co-Ni合金异常共沉积电化学行为的影响

为了研究在电化学复合共沉积过程中,惰性纳米粒子和金属离子、电极表面的相互作用,以及由此产生的对合金电化学共沉积行为的影响.本文从两个吸附过程出发: 电解液中的金属离子和H＋在纳米粒子表面的吸附；纳米粒子迁移到阴极表面,在电极表面的吸附.采用Zeta电势和稳态极化以及电化学交流阻抗（EIS）研究了纳米Al2O3粒子和电解液中的金属离子，和电极表面的相互作用,进而分析了纳米粒子对Co2＋和Ni2＋还原沉积的影响规律.通过对阻抗数据的拟合,讨论了Al2O3纳米粒子对等效电路中各物理参数的影响.在H＋和不同金属离子在纳米粒子上发生竞争吸附的基础上,提出了纳米粒子和合金共沉积的可能反应历程.     

A new approach for the synthesis of K-free nickel hexacyanoferrate

A Ni, Al hydrotalcite-like compound (Htlc) has been proven an useful host material for an alternative synthesis of a K⁺-free mixed hexacyanoferrate Ni_1.5Fe^III(CN)₆, which is very difficult to obtain in bulk. The first stage of the procedure consists in the intercalation of hexacyanoferrate(III) inside the Htlc structure. The intercalated Htlc has been treated with a NiNO₃ solution. The obtained material has been characterized by XRD, XAS Raman and FT-IR spectroscopy. The voltammetric response of the compound obtained after the complete solubilization of the Htlc host shows a typical fingerprint of nickel hexacyanoferrate material with a very low level of potassium. Elemental analysis confirmed the absence of K⁺ and thus the occurrence of K⁺-free nickel hexacyanoferrate (14% yield).     

金属载体催化剂的涂层研究

在高温氧化处理不同时间的金属载体箔片上涂覆MgAl2O4/Al2O3过渡涂层,利用TG-DSC,XRD,SEM,BET和超声振动等分析测试技术,对载体和涂层的微观结构与表面特性进行研究.结果表明,在950 ℃下高温氧化5 h,箔片表面生成板状Al2O3晶须,有利于增强涂层与箔片的附着力.在载体表面涂覆一层MgAl2O4/Al2O3过渡涂层,有助于提高活性组分与金属载体的结合力,可以获得高结合强度的涂层结构,促使活性元素高度分散.     

Studies on Natural CXN Zeolite： Modification, Framework De-alumination and Ion-exchange

A natural CXN zeolite (stilbite, type code-STI) discovered in China was modified with NH4^ exchange by using ammonium salt and calcinations (procedure Ⅰ), or with NH4 exchange followed by treatment with acid (procedure Ⅱ). The coordination state of Si and A1 atoms in the framework, the property of ion exchange, and the adsorption of the H-STI zeolite samples prepared by different modification procedure were investigated with XRD,EDX,^29Si and ^27Al MAS NMR, Ag^ ion exchange and Ne adsorption. The results of the investigations indicate that different procedure of the modification made variety on the distribution of the framework Si atoms and A1 atoms,the content of non-framework aluminum, and the blocking channels and the shielding effect to the positions of the exchangeable cations. The H-STI zeolite prepared by the procedure Ⅱ possesses high ion exchange capacity, open and perfect pore system, and high thermal stability.     

The Crystal Structure of Ba3Cu2Al2F16: a Relative of Ba4Cu2Al3F21

Ba₃Cu₂Al₂F₁₆ is monoclinic: a = 7.334(1)Å, b = 5.320(2)Å, c = 16.022(1)Å, β = 96.34(1)°, Z = 2. Its crystal structure was solved in the space group P2₁ (No. 4) from synchrotron X‐ray single crystal data using 2685 unique reflections (2639 with F_o/σ(F_o) > 4). The final R factor is 0.044. The structure consists of a succession along the c‐axis of the cell of three layers of two different kinds of sheets developing in the (a, b) plane. The first one, formulated [(AlF₅)₂]_∞^4— and hereafter named A, is built up from infinite cis‐chains of aluminium‐fluorine octahedra [AlF₆], linked by two vertices and distanced by a. The second one, formulated [Cu₂AlF₁₁]_∞^4— and named B, is bidimensional. It is constituted of distorted copper‐fluorine octahedra [CuF₆], linked by edges, which form infinite chains interconnected by three vertices of isolated [AlF₆] octahedra. The stacking sequence of the sheets is (A, B, B)_∞. The barium ions, 12‐coordinated, are inserted between the sheets. The crystal structure of Ba₃Cu₂Al₂F₁₆ is closely related to that of Ba₄Cu₂Al₃F₂₁. Only the proportion and the stacking sequence of the two kinds of sheets in the c‐direction differ, according to two different compositions and two different symmetries.     

Al/AlN多层膜的摩擦磨损性能研究

采用柱状靶磁控溅射系统制备Al/AlN纳米多层膜,采用纳米压痕仪测量Al/AlN纳米多层膜的纳米硬度,在UMT-2M型摩擦磨损试验机上评价其摩擦磨损性能.结果表明:当AlN层较厚时,薄膜在很短时间内被磨穿;调节Al/AlN层厚比为2.9/1.1时,薄膜的摩擦磨损性能明显提高;当保持Al/AlN层厚比为2.9/1.1、变化多层膜的调制周期时,薄膜的摩擦系数较低,但硬度较低的薄膜由于承载能力不够,不能够保持优良的摩擦磨损性能.