卟啉单晶微纳米棒的合成及光电性能研究

通过相界面反应制备了一维卟啉微纳米棒,并通过紫外、红外和X衍射仪等多种表征方法对其进行了表征.结果表明,在无机酸的作用下,卟啉分子通过-,氢键和静电作用等多种相互作用聚集成有序的J-聚集体.将此一维卟啉微纳米棒构筑为微纳米器件,并测试其光电性能.该纳米器件在可见光照射下的光电流很大,关闭光源,电流在40 s内降到最低,再次打开光源,电流又在120 s内升到了最大.经过多次＂开＂、＂关＂光源,电导的光响应依旧没有降低.这种具有光电响应的卟啉微纳米棒有望成为微纳电子器件的光电元件.     

含吡啶基团的双极主体材料的合成、性能与蓝光电致磷光器件研究

吡啶类衍生物具有较好的电子传输性能和较高的三线态能级,在有机电致发光中一般用来构建电子传输材料或主体材料中的电子传输单元.本文通过将吡啶的2,6位与三苯胺或N-苯基-咔唑的邻位连接设计合成了两个基于吡啶的双极主体材料DTPAPPy和DCzPPy.它们的三线态能级分别为2.64和2.70eV.以它们作为主体材料制备的基于Firpic的蓝光磷光器件最大电流效率分别为15.4和25.3cd/A.     

光伏太阳能电池生产过程中的污染问题

日益壮大的光伏产业正在为人类发展作出积极的贡献.采用光伏发电来代替传统的发电技术,将会减少89%的空气污染.然而,在这个倡导绿色环境的时代,光伏器件生产引起的环境、健康和安全（EHS）问题也日益引起社会各界的广泛关注.认清光伏产品在生产过程中污染的真相对维持光伏产业的可持续发展有着相当重要的意义.本文综述了常见太阳能电池的EHS问题,并提出了可以减少污染的有效途径;采用生命周期评估（LCA）方法进一步比较了各种太阳能电池生产过程中污染物的排放量数据.     

氢化物发生-原子荧光光谱法同时测定水中砷和锑

建立在硝酸介质中用氢化物发生-原子荧光光谱法同时测定水中砷和锑的方法。优化了仪器工作条件、酸度、硼氢化钾及还原剂浓度。砷、锑的线性范围为0～10．0μg／L;检出限分别为0．02,0．01μg／L;测定结果的相对标准偏差分别为1．77％～3．72％,2．95％～4．87％（n=6）;加标回收率分别为98％106％,96％105％。该法操作简便,灵敏度高,快速,便于推广,适用于水中砷和锑的同时测定。     

Characterization and Three-dimensional Structural Modeling of Humic Acid via Molecular Mechanics and Molecular Dynamic Simulation

The humic acid（HA） sample obtained from the alluvial soil was characterized by elemental composition, pyrolysis gas chromatography-mass spectrometry（Py-GC-MS） and solid-state 13C nuclear magnetic resonance （13C NMR） spectroscopy. There is high fat content and a few nitrogen-containing functional groups in HA. Py-GC-MS demonstrates the characterization and structural identification of HA. One long list of identified pyrolysis products was proposed for the construction of conceptual model of HA. Solid-state 13C NMR data indicate there are higher values of alkyl-C, O-alkyl-C and aryl-C in HA. The elemental composition, structural carbon distribution and L3C NMR spectroscopy of simulated HA are consistent with those of experimental HA. HyperChem was used to simulate the three-dimensional molecular structure of the monomer, which was optimized by the molecular mechanics of the optimized potential for liquid simulations（OPLS） force field and molecular dynamics simulation to get the stable and balanced conformation. The deprotonation process study depicts that the degree of ionization of HA gets deeper, while the electronegativity of HA and the energy of van der Waals（vdW） increase. Moreover, the 3D structure of humic acid with -4 charges is the most stable. The deprotonation process is an endothermic process.     

Coherent Vibrational Dynamics and High-resolution Nonlinear Spectroscopy： A Comparison with the Air/DMSO Liquid Interface

We present a comparative study on the C-H stretching vibrations at air/DMSO （dimethyl sulfoxide） interface with both the free-induction decay （FID） coherent vibrational dynamics and the sub-wavenumber high resolution sum-frequency generation vibrational spectroscopy measurements. In principle the frequency-domain and time-domain spectroscopic measurements should generate identical information for a given molecular system. However, when the molecular systems are with several coupled or overlapping vibrational modes, obtain- ing detailed spectroscopic and coherent dynamics information is not as straightforward and rather difficult from either the time-domain or the frequency domain measurements. For the case of air/DMSO interface that is with moderately complex vibrational spectra, we show that the frequency-domain measurement with sub-wavenumber high-resolution sum-frequency generation vibrational spectroscopy is probably more advantageous than the time- domain measurement in obtaining quantitative understanding of the structure and coherent dynamics of the molecular interface.     

Preparation of Mg–Al hydrotalcite from the effluent of Friedel–Crafts reaction and its application as a catalyst in Knoevenagel reaction

Abstract

Hydrotalcite containing magnesium and aluminium (Mg–Al HT) with a molar ratio of Mg(II)/Al(III) = 2.5 has been prepared by a co-precipitation method using the effluent of a Friedel–Crafts acylation reaction. The HT was calcined at 500°C and reconstructed with deionized water. The synthesized HT was characterized by XRD and FT-IR spectroscopy and was successfully used as a catalyst in the Knoevenagel reaction of aldehydes and active methylene compounds. The catalyst was found to be reusable.     

Aromatization of Hantzsch 1,4-Dihydropyridines with Al(NO3)3·9H2O and/or Fe(NO3)3·9H2O in the Presence of Silica Sulfuric Acid Under Mild and Heterogeneous Conditions

A simple and convenient method for the aromatization of Hantzsch 1,4-dihydropyridines to the corresponding pyridines is achieved via combination of aluminum or ferric nitrates and silica sulfuric acid as environmentally friendly and novel oxidizing media. This oxidation was carried out in dichloromethane under heterogeneous conditions with good to excellent yields.     

Study of the effect of laser treatment on the initial oxidation behaviour of Al‐coated NiCrAlY bond‐coat

In this study, the initial oxidation behaviour of laser‐treated Al/NiCrAlY bond‐coat is investigated. Two approaches, (i) Al film sputtering on the surface of bond‐coat and (ii) laser treatment, have been taken to enhance the oxidation resistance of NiCrAlY bond‐coat. Experimental results showed that after laser treatment, the Al/NiCrAlY bond‐coat exhibited a columnar dendritic microstructure without cracks and voids. A dense and continuous α‐Al₂O₃/Cr₂O₃ multilayer was found to form on the bond‐coat surface. Results on the cyclic oxidation at 1200 °C (for time ≤ 204 h) revealed that the laser‐treated Al/NiCrAlY bond‐coat exhibited better oxidation resistance compared to as‐sprayed NiCrAlY, Al/NiCrAlY and laser‐remelted NiCrAlY bond‐coat. The formation of θ‐Al₂O₃, NiO, Cr₂O₃ and NiCr₂O₄ spinel oxides was observed to be suppressed due to the preformed α‐Al₂O₃ scale during initial oxidation on the surface of laser pre‐oxidized Al/NiCrAlY bond‐coat. Copyright © 2013 John Wiley & Sons, Ltd.