A two dimensional, experimental study on the evolution of the detachment and its time-behavior in filled rubber

Summary The detachment of a rubber matrix from a rigid inclusion under monotonic loading and at subsequent relaxation is investigated within two dimensional analysis. Examined are stress–strain experimental data acquired with the help of a test bed equipped with a digital image-acquisition device. The influence of the interfacial bonding strength and the particle size on the detachment process is analyzed. The influence of the interfacial bonding strength is visible in the stress–strain diagram of loading and in the recorded images. The relaxation test reveals no influence of the bonding strength on the stress-relaxation. However, the image analysis indicates a secondary transient creep of the contour of detachment, which depends on the interfacial bonding.     

Magnetotransport and magnetic properties of InAs/Mn digital alloys

We have investigated the magnetic and magneto-transport properties of a systematic sequence of five InAs/Mn digital alloys grown by a combination of molecular beam epitaxy and atomic layer epitaxy. The samples consist of 30 periods of Mn fractional monolayers (ML) (0.17–0.5 ML) separated by 14 ML thick InAs spacer layers in a superlattice configuration. Four samples show n-type electrical conduction while the fifth (0.25 ML Mn) is p-type. Squid magnetization measurements performed on these samples show remnant magnetization above room temperature, which is apparently related to a second phase.     

Ca(NO3)2•4H2O-catalysed Biginelli Reaction: One-pot Synthesis of 1,2,3,4-Tetrahydropyrimidin-2-ones/pyrimidine-2-thiones under Solvent-free Conditions

The synthesis of 1,2,3,4-dihydropyrimidinone/thione derivatives was achieved in good to excellent yields using calcium(II) nitrate as catalyst to promote the Biginelli three-component condensation reaction from a diversity of aromatic aldehydes, β-keto compounds and urea or thiourea. The reaction was carried out under solvent-free conditions.     

Micromechanisms and Mechanics of Damage and Fracture in Thin Film/Substrate Systems

The purpose of this paper is to review the mechanisms and available theoretical methods for modeling the strength and failure of thin film/substrate systems     

Vessel Arrival Process and Queueing in Marine Ports Handling Bulk Materials

We study the vessel arrival process in bulk ports handling either cargo containers or minerals. Then we introduce the SHIP/G/1 queue to be able to study the queueing behavior at the port. We present approximations for the asymptotic probabilities of delay and the number of vessels at the port. Numerical examples show the accuracy of the approximations. In appendices, we provide details of the analysis of the number of vessels at the port and the correlation properties of the vessel arrival process.     

类锂铝复合机制产生X光激光的等离子体状态

本文从速率方程出发,讨论了类锂铝复合等离子体的激发态结构,衰减常数,反转率和小信号增益等表征介质增益特性的物理量以及它们随电子温度,电子密度和光子逃逸几率的变化。找到了进行类锂铝离子通过复合机制产生X光激光设计应创造的等离子体状态目标区域。还讨论了这些物理量随原子序数变化的定标律。     

Cellulose-based fibers from liquid–crystalline solutions. II. Processing and morphology of acetate/butyrate esters

Fibers were spun from isotropic and anisotropic dimethylacetamide solutions of cellulose esters. Take-up speeds of the dry jet/wet spinning process varied. Water served as the coagulant. The mechanical properties of the fibers increased as spinning progressed from the isotropic to the anisotropic state of the solution. A trade-off in solubility and fiber properties was noted as the butyryl acetyl ratio decreased. Whereas high butyryl content enhances both overall solubility and the formation of liquid–crystalline solutions at lower concentration, it results in lower fiber modulus and strength. Morphology of the fibers depended on the coagulation rate which was influenced by the concentration of the sppinning solution. The level of orientation and crystallinity of the fibers increased somewhat when they were spun from liquid-crystalline solutions. © 1993 John Wiley & Sons, Inc.     

An interpolation approximation for the GI/G/1 queue based on multipoint Padé approximation

The performance evaluation of many complex manufacturing, communication and computer systems has been made possible by modeling them as queueing systems. Many approximations used in queueing theory have been drawn from the behavior of queues in light and heavy traffic conditions. In this paper, we propose a new approximation technique, which combines the light and heavy traffic characteristics. This interpolation approximation is based on the theory of multipoint Padé approximation which is applied at two points: light and heavy traffic. We show how this can be applied for estimating the waiting time moments of the ^GI/G/1 queue. The light traffic derivatives of any order can be evaluated using the MacLaurin series analysis procedure. The heavy traffic limits of the ^GI/G/1 queue are well known in the literature. Our technique generalizes the previously developed interpolation approximations and can be used to approximate any order of the waiting time moments. Through numerical examples, we show that the moments of the steady state waiting time can be estimated with extremely high accuracy under all ranges of traffic intensities using low orders of the approximant. We also present a framework for the development of simple analytical approximation formulas. This revised version was published online in June 2006 with corrections to the Cover Date.     

Synthesis of aromatic poly(thioether ketone)

Aromatic poly(thioether ketone)s were prepared by the direct polycondensation of aromatic dicarboxylic acids with aryl compounds containing ether or sulfide structures using phosphorus pentoxide/methanesulfonic acid (PPMA) as a condensing agent and solvent. Polycondensation proceeded smoothly and produced aromatic poly(thioether ketone)s with inherent viscosities up to 0.73 dL/g. The synthesis of substituted aryl ketones by the reaction of substituted benzoic acids with aryl compounds in PMMA was studied in detail to demonstrate the feasibility of the reaction for polymer formation. The thermogravimetry of the aromatic poly(thioether ketone)s showed a 10% weight loss in air and nitrogen at around 450 and 460°C, respectively. © 1992 John Wiley & Sons, Inc.