Infrared reflection absorption spectroscopic study of the adsorption structures of dimethyl ether and methyl ethyl ether on Cu(1 1 1) and Ag(1 1 1)

Infrared reflection absorption (IRA) spectra measured for dimethyl ether (DME) adsorbed at 80 K on Cu(1 1 1) and Ag(1 1 1) give IR bands belonging only to the A₁ and B₂ species, indicating that the adsorbate takes on an orientation in which the C₂ axis bisecting the COC bond angle tilts away from the surface normal within the plane perpendicular to the substrates. The DFT method was applied to simulate the IRA spectra, indicating that the tilt angles of DME on Cu(1 1 1) and Ag(1 1 1) are about 50° and 55°, respectively, at submonolayer coverages. The results are in contrast to the case of DME on Cu(1 1 0) and Ag(1 1 0), where the C₂ axis is perpendicular to the substrates [T. Kiyohara et al., J. Phys. Chem. A 106 (2002) 3469]. Methyl ethyl ether (MEE) adsorbed at 80 K on Cu(1 1 1) gives IRA bands mainly ascribable to the gauche (G) form, whereas the IRA spectra measured for MEE on Ag(1 1 1) are characterized by the trans (T) form. The rotational isomers are identical with those on Cu(1 1 0) and Ag(1 1 0); i.e., MEE on Cu(1 1 0) takes the G form and the adsorbate on Ag(1 1 0) the T form [T. Kiyohara et al., J. Phys. Chem. B 107 (2003) 5008]. The simulation of the IRA spectra indicated that (i) the G form adsorbate on Cu(1 1 1) takes an orientation, in which the axis bisecting the COC bond angle tilts away from the surface normal by ca. 30° within the plane perpendicular to the surface to make the CH₃-CH₂ bond almost parallel to the surface, and (ii) the T form adsorbate on Ag(1 1 1) takes an orientation, in which the bisecting axis tilts away by ca. 60° from the surface normal within the perpendicular plane. Comparison of these adsorption structures of MEE on the (1 1 1) substrates with those of MEE on Cu(1 1 0) and Ag(1 1 0) indicates that the structures are mainly determined by a coordination interaction of the oxygen atom to the surface metals and an attractive van der Waals interaction between the ethyl group of MEE and the substrate surfaces. The coordination interaction plays an important role on Cu(1 1 1) and Cu(1 1 0), which makes the adsorbate on the Cu substrates to take the orientations with the bisecting axis near parallel to the surface normal and to assume the G form in order to make the ethyl group parallel to the surface, which is favorable for the van der Waals interaction. In the case of MEE on the Ag substrates the attractive van der Waals interaction plays a dominant role, resulting in the T form which is more favorable for the interaction than the G form.     

Vertical bonding distances of PTCDA on Au(1 1 1) and Ag(1 1 1): Relation to the bonding type

The vertical bonding distance of 3,4,9,10-perylene-tetracarboxylic-dianhydride (PTCDA) above the Au(1 1 1) surface has been measured by the normal incidence X-ray standing wave (NIXSW) technique. The carbon skeleton of PTCDA has a vertical distance of D = (3.27 ± 0.02) Å to the Au(1 1 1) substrate. This distance corresponds very nearly to the sum of the van der Waals radii of carbon and gold, suggesting the adsorption to be a physisorptive one. In contrast, the PTCDA/Ag(1 1 1) interface which according to spectroscopic data follows the standard model of chemisorption very closely, shows a considerably smaller bonding distance of D = (2.86 ± 0.01) Å [A. Hauschild, K. Karki, B.C.C. Cowie, M. Rohlfing, F.S. Tautz, M. Sokolowski, Phys. Rev. Lett. 94 (2005) 036106, comment: Rurali et al., Phys. Lett. 95 (2005) 209205, reply: Phys. Rev. Lett. 95 (2005) 209206]. The different vertical adsorption heights of PTCDA on gold and silver are discussed in relation to the different bonding mechanisms on both noble metal surfaces.     

Propagation analysis of flattened circular Gaussian beams with a circular aperture in turbulent atmosphere

The propagation properties of flattened Gaussian beam with aperture in turbulent atmosphere have been studied by using the extended Huygens-Fresnel principle. From the study and numerical calculation, the effects of aperture on the propagation of flattened Gaussian beams in turbulent atmosphere have been illuminated. It shows that when the value of the truncation parameter δ is bigger, for example δ?2, the effects of aperture on the propagation properties are too small to be neglected. But when the truncation parameter δ is smaller, for example δ<2, the effects of aperture are complex. The peak value of the average intensity descends more rapidly and the beam spot spreads quicker with aperture than that without aperture when the propagation distance increases. Meanwhile, with the propagation distance increasing, the average intensity profiles of flattened Gaussian beams gradually convert into Gaussian average intensity profiles. In addition, some limiting cases are also discussed. It agrees with the existing results.     

Properties of galactocerebroside layers transferred to glassy carbon electrodes: effect of an applied electric field

Galactocerebroside films deposited onto glassy carbon electrodes have been previously studied through the electrochemical response of a redox couple present in solution. Those experiments indicated that the film is inhomogeneous and that there are lipid-free places. In this work, we present experimental results indicating that those bare regions are formed when the electrode is introduced in an aqueous solution, and that the size and/or amount of uncovered domains increase when negative potentials are applied to the film. The experimental techniques employed for these findings are epifluorescence microscopy and ellipsometry.     

A new form of the Sutton–Chen potential for the Cu–Ag alloys

The analytic construction of a many-body potential inspired from the Sutton–Chen parametrization is presented for copper and silver. A new approach is used to model the cross interaction for the Cu–Ag alloys. The parameters are fitted to first principles calculations based on the full potential linear plane wave method. The structural properties of the order and disorder Cu–Ag alloys in the B₂and fcc structures are presented for different concentration.     

Diamond paste based electrodes for the determination of Pb(II) at trace concentration levels

Three types of monocrystalline diamond: natural diamond 1 μm, synthetic diamond 50 μm (synthetic-1), and synthetic diamond 1 μm (synthetic-2) were used for electrodes’ construction. The linear concentration ranges recorded for Pb(II), when natural diamond, synthetic-1 and synthetic-2 based electrodes were used were between 10⁻⁹ and 10⁻⁶; 10⁻¹⁰ and 10⁻⁷; and between 10⁻¹⁰ and 10⁻⁸ mol l⁻¹, respectively. Low detection limits which lie between 10 and 100 pmol l⁻¹ proves the sensitivity of the electrodes. It was found that Pb(II) yielded a peak at about +0.3±0.02 V (versus Ag/AgCl) for all the electrodes. Lead was determine with high reliability from water and tea samples at trace concentration levels using the proposed diamond paste based electrodes.     

Electron transport in bipyridinium films

Bipyridinium dications are versatile building blocks for the assembly of functional materials. In particular, their reliable electrochemical response has encouraged the design of electroactive films. Diverse and elegant experimental strategies to coat metallic and semiconducting electrodes with bipyridinium compounds have, in fact, emerged over the past two decades. The resulting interfacial assemblies span from a few nanometers to several micrometers in thickness. They incorporate from a single molecular layer to large collections of entangled polymer chains. They transport electrons efficiently from the electrode surface to the film/solution interface and vice versa. Electron self-exchange between and the physical diffusion of the bipyridinium building blocks conspire in defining the charge transport properties of these fascinating electroactive assemblies. Often, the matrix of electron-deficient bipyridinium dications can be exploited to entrap electron-rich analytes. Electrostatic interactions promote the supramolecular association of the guests with the surface-confined host matrix. Furthermore, chromophoric sites can be coupled to the bipyridinium dications to produce photosensitive arrays capable of harvesting light and generating current. Thus, thorough investigations on the fundamental properties of these functional molecule-based materials can lead to promising applications in electroanalysis and solar energy conversion, while contributing to advances in the basic understanding of electron transport in interfacial assemblies.     

Experimental study and modeling of impedance of the her on porous Ni electrodes

The electrochemical activity towards the hydrogen evolution reaction of pressed powder electrodes (Ni---Zn and Ni---Al) was studied in alkaline solutions after leaching out the more active element. These electrodes displayed porous character, and electrochemical impedance spectroscopy was used to characterize surface porosity. The influence of overpotential, temperature, poisons, electrode composition and electrolyte concentration was studied and distinction criteria between faradaic and geometrical effects were formulated. Digital simulations of impedance values in different pore geometries were also carried out. The kinetic parameters of hydrogen evolution were determined. The main factor influencing the electrode activity seems to be the real surface area.     

Adsorption of bisulfate on the Ru(0001) single crystal electrode surface

Adsorption of anions from sulfuric acid solutions has been studied on Ru(0001) single crystal and polycrystalline surfaces by electrochemical techniques and in-situ Fourier transform infrared spectroscopy. Infrared spectroscopy shows that bisulfate is the anion adsorbed on the Ru(0001) surface. The bisulfate adsorption is detected at the H₂ evolution potential and extends into the potential region where the Ru surface is oxidized. A method for extracting unipolar bands from bipolar bands has been presented. The tuning rate of adsorbed bisulfate in the double layer potential region of Ru(0001) was found to be significantly smaller than those observed for other platinum metals. This has been ascribed to a small change in bisulfate coverage on Ru(0001) in this potential range. Bisulfate vibration frequencies are higher on this surface than at any face-centered cubic metal with the (111) orientation. Oxidation of the Ru(0001) surface is limited to one electron per Ru atom, distinctly different from the high degree of oxidation seen in polycrystalline surfaces. For oxidized polycrystalline Ru, only solution phase sulfates and bisulfates are observed in the IR spectra.