粉煤灰基氧氟沙星分子印迹聚合物的制备及其应用

以工业废料粉煤灰微球为基质,氧氟沙星 (OFL) 为模板分子,采用表面印迹法制备印迹材料MIP。通过紫外光谱法结合理论分析选择实验条件,并对该印迹材料结构、吸附行为进行研究。结果表明,该印迹材料对氧氟沙星具有良好的特异识别性和优良的亲和性。与以硅胶为载体制备的印迹聚合物相比,该材料吸附容量更高和印迹效果更好。将其作为固相萃取填料对鸡产品进行分离富集,与C18柱相比,分离富集效果更好。结合UPLC,对实际样品中氧氟沙星进行分析,回收率为82.0%-96.7%,相对标准偏差低于5.5%,可用于鸡产品中氧氟沙星分离分析。     

大粒径介孔氧化硅微球的优化合成及表征

以非离子型嵌段共聚物为模板剂、正硅酸乙酯为硅源,制备了一种比表面积为712m2·g-1、孔径6.93nm、孔容1.06cm3·g-1、粒径10μm的介孔SBA-15微球,采用扫描电镜考察了各种合成条件对介孔氧化硅微球形貌的影响,对SBA-15介孔微球的合成条件优化和形成机理进行了研究和探讨。结果表明:介孔氧化硅微球的生长可以看作一个由微小溶胶粒子发生渐进聚沉、成长为较大溶胶粒子的过程;共表面活性剂和无机盐的引入对介孔微球的形成具有辅助作用;合成体系的酸度和晶化阶段之前的陈化条件是介孔微球形成的关键所在。在共聚物的盐酸溶液(1mol·L-1)中,不添加共表面活性剂和无机盐,仅控制陈化条件于35℃静置24h,100℃水热处理24h,可得到大粒径的介孔SBA-15微球。     

Ionic‐Liquid‐Grafted Rigid Poly(p‐Phenylene) Microspheres: Efficient Heterogeneous Media for Metal Scavenging and Catalysis

Novel guanidinium ionic liquid‐grafted rigid poly(p‐phenylene) (PPPIL) microspheres have been developed for metal scavenging and catalysis. The noble‐metal nanoparticles supported on the microspheres surface can be used as efficient heterogeneous catalysts. The combination of nanoparticles and ionic liquid fragments on the microsphere surfaces enhance the activity and durability of the catalyst. The PPPIL ? Pd⁰ catalyst has been tested in the Suzuki cross‐coupling reaction, and exhibits much higher catalytic activity than Pd catalysts supported on porous polymer matrices. The PPPIL ? Pd⁰ catalyst can be recycled at least for nine runs without any significant loss of activity. The present approach may, therefore, have potential applications in transition‐metal‐nanocatalyzed reactions.     

阿司匹林-蒙脱土-壳聚糖缓释微球的制备及其体外释放性能

利用溶液法预先制备壳聚糖(Cs)-蒙脱土(MMT)复合材料(Cs-MMT),以Cs-MMT、Cs为原料,采用反相悬浮聚合法制得一种新型药物缓释体系阿司匹林-蒙脱土-壳聚糖载药微球(Asp-MMT-Cs)。采用FT-IR、SEM表征了Cs-MMT和Asp-MMT-Cs载药微球的结构及形态;设计正交实验优化了Asp-MMT-Cs载药微球的制备工艺;通过体外释放实验探讨了载药微球在不同模拟释放液中的释药规律。结果表明:所得微球球形度好,粒径分布较均匀;最优工艺制得的载药微球平均粒径为81.20μm,载药量为9.61%,包封率为76.78%。该缓释体系具有pH敏感性,更倾向于在pH较高的磷酸盐缓冲溶液中释放。     

Amperometric NADH Biosensor Based on Magnetic Chitosan Microspheres/Poly(thionine) Modified Glassy Carbon Electrode

Novel magnetic chitosan‐coated microspheres (MCMSs) were prepared by modifying carbon‐coated iron magnetic nanoparticles with chitosan. An amperometric dihydronicotinamide adenine dinucleotide (NADH) sensor was constructed based on immobilizing MCMS on the surface of a polythionine (PTH) modified glassy carbon electrode (GCE). The fabrication of MCMS/PTH film and its electrocatalytic effect on electrochemical oxidation of NADH were investigated by electrochemical impedance spectroscopy (EIS) and voltammetric methods. It was found that the resulting integrated films of PTH and MCMS exhibit high electrocatalytic response to NADH by significantly reduce its overpotential. The effects of the experimental variables on the amperometric determination of NADH such as solution pH and working potential were investigated for optimum analytical performance. This electrochemical sensor had a fast response to NADH which was less than 10 s. Linear response ranges of 2–10 μM and 10–100 μM and a detection limit of 0.51 μM (S/N=3) were obtained under the optimum conditions. Moreover, the selectivity, stability and reproducibility of this biosensor was evaluated with satisfactory results.     

Preparation and characterization of molecularly imprinted microspheres for dibutyl phthalate recognition in aqueous environment

Molecularly imprinted microspheres (MIMs) were prepared by suspension polymerization for the binding and recognition of dibutyl phthalate (DBP). DBP was used as the template molecule, methacrylic acid as the functional monomer, ethylene dimethacrylate (EDMA) as the linking agent, PVA as the dispersing agent, and Span 60 as the surfactant. The MIMs were characterized with electron microscope scanning and rebinding experiments. The Scatchard plot revealed that the template‐polymer system has a two‐site binding behavior with dissociation constants of 4.05 and 0.515 mmol/L. The MIMs exhibited the highest selective rebinding to DBP at 736.85 μg/g. The recoveries of the MIM‐SPE column for DBP extraction was 94.75–101.9% with the RSD of 1.5–7.3%, indicating the feasibility of the prepared MIMs for DBP extraction. Finally, the method developed was used to analyze the trace levels of phthalate in aqueous environment samples.     

花状微球NiO/CeO_2催化剂上乙醇水蒸气重整制氢研究

用水热法制备微米尺寸CeO2花状微球粉体,并通过浸渍/热分解法在该粉体上担载纳米尺寸的NiO颗粒,制得催化剂NiO/CeO2。对催化剂进行了XRD、SEM、XES和BET物性表征。经固定床反应器对催化剂的催化性能进行测试。装载1.0 g催化剂,液体处理量0.05 mL/min。结果表明,该方法合成的催化剂NiO/CeO2对低温乙醇水蒸气重整反应表现出较高的活性和稳定性。同时通过微量Cr、Zn、Cu的加入在低温区抑制了CO、CH4的生成,提高了H2的产率和催化剂的抗积炭能力。该催化剂连续稳定性测试达到2 000 h;进行反复起动稳定性测试12次后,未表现出失活特征。     

羟基磷灰石/聚乳酸微粒复合生物支架的体外细胞相容性评价

利用溶液共混法以及溶剂挥发法制备了羟基磷灰石(Nano-HA)/聚乳酸(PLA)微粒,再粘结微粒加工成三维多孔Nano-HA/PLA微粒复合生物支架。借助相差显微镜、扫描电子显微镜和MTT法检测了鼠骨髓基质细胞(BMSCs)在该支架材料上的生长情况,通过细胞形态学观察和细胞增殖情况评价了该复合生物支架材料的生物相容性。结果表明,SEM观察到支架材料上培养细胞4d后,细胞主要附着、铺展在支架的低洼处或孔洞处表面,并向孔洞深部沿壁生长;在支架材料上培养细胞8d后,细胞多为梭形形态,并有许多生长角,直接贴附于支架的微粒表面,开始连片生长,有明显的增值,各组没有变形、坏死现象。支架材料上培养细胞2,3,4,5,6和8d的MTT检测表明,各实验组RGR均达到100%以上,细胞毒性为0级;细胞在支架材料上的生长曲线显示,实验组细胞活力比对照组高26%。因此,该Nano-HA/PLA微粒复合生物支架没有细胞毒性,并对细胞有良好的粘附和增殖能力,为较具潜力的骨修复材料。     

Preconcentration sensitive determination of pyrethroid insecticides in environmental water samples with solid phase extraction with SiO2 microspheres cartridge prior to high performance liquid chromatography

Present study developed a new method for the sensitive determination of pyrethroid insecticides with solid phase extraction in combination with high performance liquid chromatography and UV detector. SiO₂ microspheres, a new SiO₂ based material, was investigated for the enrichment ability and applicability as the solid phase extraction sorbent. Four pyrethroid pesticides such as fenpropathrin, cyhalothrin, fenvalevate and biphenthrin were used as the target analytes. Parameters that maybe influence the extraction efficiency such as the eluent type and its volume, sample flow rate, sample pH, and the sample volume were optimized in detail, and the optimal conditions were as followed: sample volume, 100 mL; concentration of methanol, 30%; acetone volume, 5 mL; sample flow rate, 4.2 mL min⁻¹; sample pH, 7. The experimental results indicated that there was good linearity in the concentration range of 0.1–50 μg L⁻¹ except biphenthrin in the range of 0.05–25 μg L⁻¹. The detection limits for fenpropathrin, cyhalothrin, fenvalevate and biphenthrin were in the range of 0.02–0.08 μg L⁻¹. The intra-day and day to day precisions (RSDs, n = 6) were in the ranges of 2.6–4.4% and 5.3–7.2%, respectively. The method was validated with five real environmental water samples, and all these results proved that proposed method could be used as a good alternative for the routine analysis for such pollutants in environmental samples.     

1,1-二苯基乙烯存在下无皂乳液聚合制备磁性复合微球

报道了一种制备磁性复合微球的方法——DPE法.在自由基控制剂1,1-二苯基乙烯(DPE)存在条件下,甲基丙烯酸甲酯(MMA)与丙烯酸(AA)发生无皂乳液聚合,制备能与Fe3O4粒子相螯合的活性短链共聚物,加入Fe3O4粒子把短链共聚物引到其表面,引发其它单体继续在Fe3O4粒子表面聚合,制备磁性复合微球.研究了AA、DPE、引发剂及Fe3O4粒子加入量等对制备磁性复合微球的影响.并在此基础上,对优化后工艺制备的磁性复合微球进行了TEM、TGA及磁响应性表征.结果表明,利用该新的方法制备出了磁含量为20%、比饱和磁化强度为32.2emu/g、平均粒径为265nm且表面不含任何杂质的磁性复合微球.