The Convenient Determination of Palladium at a Solid Electrode via Adsorptive Stripping Voltammetry at a Glassy Carbon Electrode Modified with a Random Array of Mercury Nanodroplets

The detection of palladium using adsorptive stripping voltammetry reported by Wang et al. (J. Wang, K. Varughese Anal. Chim. Acta 1987, 199, 185 [3]) at a hanging mercury drop electrode is extended to a more convenient solid electrode. To this end a random array of 3.5×10⁸ mercury nanodroplets per cm² (65 nm average diameter) was electrodeposited on a glassy carbon substrate. Adsorptive stripping voltammetry was performed using 2×10^?4 M dimethylglyoxime as a chelating agent for the Pd(II) ion, with accumulation at ?0.20 V vs. SCE for 120 s and a linear detection range of 5–150 μM was determined with a limit of detection of 1.6 μM.     

Square wave adsorptive cathodic stripping voltammetry automated by sequential injection analysis Potentialities and limitations exemplified by the determination of methyl parathion in water samples

This paper describes the development and evaluation of a sequential injection method to automate the determination of methyl parathion by square wave adsorptive cathodic stripping voltammetry exploiting the concept of monosegmented flow analysis to perform in-line sample conditioning and standard addition. Accumulation and stripping steps are made in the sample medium conditioned with 40 mmol L⁻¹ Britton-Robinson buffer (pH 10) in 0.25 mol L⁻¹ NaNO₃. The homogenized mixture is injected at a flow rate of 10 μL s⁻¹ toward the flow cell, which is adapted to the capillary of a hanging drop mercury electrode. After a suitable deposition time, the flow is stopped and the potential is scanned from −0.3 to −1.0 V versus Ag/AgCl at frequency of 250 Hz and pulse height of 25 mV. The linear dynamic range is observed for methyl parathion concentrations between 0.010 and 0.50 mg L⁻¹, with detection and quantification limits of 2 and 7 μg L⁻¹, respectively. The sampling throughput is 25 h⁻¹ if the in line standard addition and sample conditioning protocols are followed, but this frequency can be increased up to 61 h⁻¹ if the sample is conditioned off-line and quantified using an external calibration curve. The method was applied for determination of methyl parathion in spiked water samples and the accuracy was evaluated either by comparison to high performance liquid chromatography with UV detection, or by the recovery percentages. Although no evidences of statistically significant differences were observed between the expected and obtained concentrations, because of the susceptibility of the method to interference by other pesticides (e.g., parathion, dichlorvos) and natural organic matter (e.g., fulvic and humic acids), isolation of the analyte may be required when more complex sample matrices are encountered.     

Adsorptive Voltammetric Behaviors of Resveratrol at Graphite Electrode and its Determination in Tablet Dosage Form

The adsorptive voltammetric behavior of resveratrol was studied at a graphite electrode in B‐R buffer (pH = 6.0) solution using adsorptive cyclic voltammetric technique. The oxidation of resveratrol is an irreversible adsorption controlled process. The oxidation mechanism was proposed and discussed in this work. The dependence of the current on pH and the concentration and nature of buffer were investigated to optimize the experimental conditions for the determination of resveratrol. It was found that in the range of 8.0 × 10^?9 ～ 2.0 × 10^?6 mol/L, the currents measured by differential pulse voltammetries presented a good linear property as a function of the concentrations of resveratrol. In addition, validation parameters, such as reproducibility, sensitivity and recovery were evaluated as well. The proposed method was also successfully applied for the determination of resveratrol in Chinese patent medicine with good results.     

Simultaneous Voltammetric Determination of Lead and Tin by Adsorptive Differential Pulse Stripping Method and Orthogonal Signal Correction‐Partial Least Squares in Water Samples

An adsorptive differential pulse stripping method for the simultaneous determination of lead and tin is proposed. The procedure involves an adsorptive accumulation of lead and tin on a hanging mercury drop electrode (HMDE), followed by oxidation of adsorbed lead and tin by voltammetric scan using differential pulse modulation. The optimum experimental conditions are: 0.2 mol L^?1 HNO₃, accumulation potential of ?900 mV versus Ag/AgCl, accumulation time of 200 s, scan rate of 20 mV s^?1 and pulse height of 80 mV. Lead and tin peak currents were observed in the same potential region at about ?400 mV. The simultaneous determination of lead and tin by using voltammetry is a difficult problem in analytical chemistry, due to voltammogram interferences. The resolution of a mixture of lead and tin by the application of orthogonal signal correction‐partial least squares (OSC‐PLS) was performed. The linear dynamic ranges were 0.003‐0.35 and 0.008‐0.50 μg mL^?1 and detection limits were land 3 ng mL^?1 for lead and tin, respectively. The RMSEP for lead and tin with OSC and without OSC were 2.8737, 6.0557 and 8.0941, 9.5151, respectively. The capability of the method for the analysis of real samples was evaluated by the determination of lead and tin in water samples with satisfactory results.     

Experimental choices for the determination of carbonyl compounds in air

The analysis of carbonyls in ambient air has received a great deal of scientific attention with the advancement of analytical techniques and increased demand for the build-up of its data base. In this review article, we have attempted to provide some insight into the relative performance of different instrumental approaches available for the analysis of ambient carbonyls with a major emphasis on high performance liquid chromatographic and gas chromatographic methods. Reported in several international standard procedures, derivatization of carbonyls with 2,4-dinitrophenylhydrazine (2,4-DNPH) with either an impinger or cartridges is the most commonly used method of HPLC detection. In this respect, a number of alternative hydrazine reagents have also been discussed for use with HPLC. In contrast, GC methods based on the combined application of adsorptive enrichment on solid sorbents and thermal desorption are examined with regard to their suitability for carbonyl analysis in air. Particular emphasis has been directed towards the advantages and drawbacks of these different instrumental techniques for ambient carbonyls. Based on this comparative approach, we discuss the suitability for each method for carbonyl analysis.     

n-Hg_(0.80)Mg_(0.20)Te界面积累层中二维电子气的输运特性研究

通过变磁场霍耳测量研究了MBE生长的Hg0 .80 Mg0 .2 0 Te薄膜在 1 5— 2 5 0K温度范围内的输运特性 .采用迁移率谱 (MS)和多载流子拟合过程 (MCF)相结合的方法对实验数据进行了分析 ,由该方法获得的结果和ShubnikovdeHass(SdH)振荡测量的结果都证明材料中存在二维 (2D)电子和三维 (3D)电子 .其中 2D电子主要来自于Hg1-xMgxTe CdTe的界面积累层或Hg1-xMgxTe与真空界面附近的积累层 .3D电子迁移率随温度的变化关系表明了Hg1-xMgxTe中的电子散射机理与Hg1-xCdxTe中的非常相似 :在低温下电离杂质散射 (考虑了屏蔽效应 )起主导地位 ,而温度在 10 0K以上时 ,晶格散射占主导地位 .     

CO在Ni(100)面吸附模式的研究

本文首次将McGreery的推广LEPS法用于异核双原子分子的吸附势能面.设CO在Ni面上的吸附位置有3种(图1).取Sato参数为0.5,所得典型的势能面示于图2、图3.当C—O键平行于表面并接近Ni面上的3种吸附位置时,各势能面均与图2类似,先进入一势阱,然后越过势垒进入第二势阱.发生解离型C及O的原子吸附时,共有4种模式.各势能面上表征吸附的参数列于表1,吸附模式见图1.在4种吸附模式中最稳定的是C模式,即对角相邻5CN上的解离双原子吸附,R_(c-o)=6.65a.u.,它是R_(c-o)(平衡)=2.17a.u.的三倍多.当CO键与表面垂直且接近Ni面上3种吸附位置时所得势     

铋(Ⅲ)-8-羟基喹啉-5-磺酸的吸附伏安法研究

探讨了8-羟基喹啉-5-磺酸(HQSA)和络合物Bi(Ⅲ)-HQSA的电化学性质,特别是它们在汞电极上的吸附性。在pH=7.0的磷酸盐底液中,Bi(Ⅲ)-HQSA有一灵敏还原峰,为反应物弱吸附,E_pc=-0.44V(vs.饱和Ag/AgCl)。据此建立了吸附伏安法测定铋的新方法,检测限为2.0×10^-9mol/L,线性范围5.0×10^-9～1.0×10^-6mol/L。     

镓-水杨基荧光酮伏安络合吸附波的研究

在pH为3.0的0.2mol/L邻苯二甲酸氢钾-HCI和5.0×10^-6mol/L水杨基荧光酮底液中,线性扫描可得灵敏的Ga-SAF络合物吸附波,峰电位为-0.93V(vsSCE).镓在7.5×10^-9～3.8×10^-7mol/L浓度范围内与峰高成正比关系.     

油水运移聚集数值模拟和分析

油资源的运移聚集数值模拟是描述在盆地发育中油水运移聚集演化的历史,它对于油田的勘探和合理开发有着重要的价值.本文提出问题的数学模型和修正交替方向隐式迭式格式.对于着名的二次运移聚集的水动力学实验(剖面和平面问题),进行了数值模拟,模拟结果和实验结果是完全吻合的.