纤维素基磁性聚偕胺肟树脂的研究——循环吸溴中吸附与还原能力的变化

研究了酸式纤维素基磁性聚偕胺肟树脂（ＡＭＡＯ）在循环吸溴过程中吸附容量和还原能力的变化，发现原树脂的吸溴初速和溴的还原率比再生树脂高一倍以上，但第一次和第二次再生树脂的吸附速度和还原效率几乎相同，暗示着树脂吸溴后基本结构已发生了彻底的变化．树脂在循环使用时吸溴容量变化不大而溴的还原量却显著降低，表明ＡＭＡＯ作为吸溴剂有较高的实用价值．     

Comparative studies on the adsorption and association of 3-methylxanthine and 7-methylxanthine at a charged interface

Summary A systematic comparative study of the adsorption and association of 3-methylxanthine (3MXan) and 7-methylxanthine (7MXan) at mercury-solution interfaces in acidic, neutral, and alkaline buffer solutions was undertaken by ac voltammetry. At bulk concentrations of3MXan above a threshold value, the stacking interactions between vertically oriented molecules lead to a slow reorientation aroundE _ecm, and the molecules adopt a perpendicular orientation. The association of the adsorbed molecules of7MXan is hindered and is not effective in promoting base-base stacking interactions. The enhanced surface activity of3MXan compared to7MXan results from the different position of the methyl group in the purine moiety. The effect of some divalent metal ions on adsorption stages and association of the investigated compounds has been studied. The results indicate that the complexation of methylated xanthine enhances the stacking interactions and hence would be expected to facilitate the formation of perpendicularly stacked layers ofM(II)-MXan complexes on the electrode surface. The adsorption parameters of the investigated compounds have been computed in absence and presence of Cu(II) at differentpH values. The results are compared with the behaviour of xanthine.

---

Vergleichende Untersuchungen zur Adsorption und Assoziation von 3-Methylxanthin und 7-Methylxanthin an einer geladenen Grenzfläche

Zusammenfassung Eine systematische vergleichende Untersuchung zur Adsorption und Assoziation von 3-Methylxanthin (3MXan) und 7-Methylxanthin (7MXan) an Quecksilber-Lösungs-Grenzflächen wurde mittels AC-Voltammetrie in sauren, neutralen und basischen Pufferlösungen durchgeführt. Oberhalb einer bestimmten Grenzkonzentration kommt es durch Wechselwirkungen zwischen vertikal angeordneten3MXan-Molekülen zu einer langsamen Reorientierung umE _ecm, was zu einer senkrechten Anordnung führt. Die Assoziation von7MXan ist gehindert und erlaubt daher keine ausgeprägten Basen-Basen-Wechselwirkungen. Die erhöhte Oberflächenaktivität von3MXan gegenüber7MXan resultiert aus der unterschiedlichen Stellung der Methylgruppe am Purinrest. Der Effekt einiger zweiwertiger Metallionen auf die Adsorption und Assoziation von3MXan und7MXan wurde untersucht. Die Ergebnisse weisen auf eine Begünstigung der Wechselwirkungen hin; die Bildung von vertikal angeordneten Grenzschichten an der Elektrodenoberfläche sollte daher im Fall vonM(II)-Mxan-Komplexen erleichtert sein. Die Adsorptionsparameter der untersuchten Verbindungen wurden in Abwesenheit und in Gegenwart von Cu(II) bei verschiedenenpH-Werten berechnet. Die Ergebnisse werden mit dem Verhalten von Xanthin verglichen.

     

Cure kinetics of epoxy-amine resins used in the restoration of works of art from glass or ceramic

The cure kinetics of two epoxy/amine resins, Araldite 2020 and AY103-HY956 widely used as adhesives in the restoration of works of art from glass or ceramic was investigated using FTIR spectroscopy. These resins are two-part adhesives, consisting of a resin - A, based on a diglycidyl ether of bisphenol A, and a hardener - B which is either a cycloaliphatic amine (isophorone diamine) for Araldite 2020, or a mixture of three aliphatic amines in HY956. The study was based on the collection of IR spectra, in the middle range (4000-600 cm⁻¹), of mixtures of resin and hardener at different proportions and isothermal temperatures (22-70 °C) as a function of curing time. A kinetic model was employed to simulate the experimental data using two kinetic rate constants. Diffusion control was incorporated to describe the cure behaviour at high degrees of conversion. From fitting to experimental data the kinetic and diffusional parameters were estimated, together with the activation energies of the kinetic and autocatalytic rate constants. It was found that higher degrees of curing are obtained at higher temperatures and increased amounts of hardener. Differences in the performance of the two adhesives are explained based on the type of the amines used as hardener.     

Orbital-band interactions and the reactivity of molecules on oxide surfaces: from explanations to predictions

 The surface chemistry of oxides is relevant for many technological applications: catalysis, photoelectrolysis, electronic-device fabrication, prevention of corrosion, sensor development, etc. This article reviews recent theoretical works that deal with the surface chemistry of oxides. The account begins with a discussion of results for the adsorption of CO and NO on oxides, systems which have been extensively studied in the literature and constitute an ideal benchmark for testing the quality of different levels of theory. Then, systematic studies concerned with the behavior of adsorbied alkali metals and sulfur-containing molecules are presented. Finally, a correlation between the electronic and chemical properties of mixed-metal oxides is analyzed and basic principles for designing chemically active oxides are introduced. Advances in theoretical methods and computer capabilities have made possible a fundamental understanding of many phenomena associated with the chemistry of molecules on oxide surfaces. Still many problems in this area remain as a challenge, and the approximate nature of most theoretical methods makes necessary a close coupling between theory and experiment. Following this multidisciplinary approach, the importance of band-orbital interactions for the reactivity of oxide surfaces has become clear. Simple models based on band-orbital mixing can explain trends found for the interaction of many adsorbates with oxide surfaces. These simple models provide a conceptual framework for modifying or controlling the chemical activity of pure oxides and for engineering mixed-metal oxides. In this respect, theoretical calculations can be very useful for predicting the best ways for enhancing the reactivity of oxide systems and reducing the waste of time, energy and materials characteristic of an empirical design. Received: 21 June 2001 / Accepted: 8 October 2001 / Published online: 1 February 2002     

铝原子簇上化学吸附的尺度效应及其理论模型

对铝原子簇Al_n(n=1～10,12,13)已报导过的理论预测几何构型进行合理选择, 用量子化学CNDO/2法研究了单分子一氧化碳在这些簇上取不同吸附位形时的吸附作用。结果表明吸附强度随簇尺度的变化呈“幻数”特性: Al_2、Al_6、Al_(12)簇具有特别高的吸附能, 与实验观测结果相符。采用作者建议的推广电子壳模型可合理解释这一尺度效应。对Al_(12)和Al_(13)簇电子结构的分析进一步支持了壳模型的观点。随着簇的增大, 尺度效应逐步减弱并趋向于体相铝的性质。     

气固吸附等温线的研究进展

综述了近些年来在气固吸附理论研究领域对吸附等温线的研究进展。论述了从早期的BDDT的5种类型吸附等温线，到IUPAC的6种类型吸附等温线，再到基于Ono-kondo晶格模型的Gibbs吸附分类的5种类型吸附等温线．讨论了与各种类型吸附等温线类型相对应的吸附机理，并对滞留回环现象进行了解释和分析。     

THERMODYNAMIC STUDY OF ADSORPTION OF PHENOLIC COMPOUNDS FROM AQUEOUS SOLUTION BY A WATER-COMPATIBLE HYPERCROSSLINKED POLYMERIC ADSORBENT

Equilibrium data for the adsorption of phenolic compounds, i.e., phenol, p-cresol, p-chlorophenol and p-nitrophenol from aqueous solutions by a water-compatible hypercrosslinked polymeric adsorbent (NJ-8) within temperature range of 283-323 K were obtained and correlated with a Freundlich-type of isotherm equation, so that equilibrium constants KF and n were obtained. The capacities of equilibrium adsorption for all the four phenolic compounds on the NJ-8 from aqueous solutions are around 2 times as high as those of Amberlite XAD-4, which may be attributed to the unusual micropore structure and the partial polarity on the network. The values of the enthalpy (always negative) are indicative of an exothermic process, which manifests the adsorption of all the four phenolic compounds on the two polymeric adsorbents to be a process of physical adsorption. The negative values of free energy change show that the solute is more concentrated on the adsorbent than in the bulk solution. The absolute free energy values of adsorption for NJ-8 are always higher than those for Amberlite XAD-4, which indicates that phenolic compounds are preferentially adsorbed on NJ-8. The negative values of the adsorption entropy are consistent with the restricted mobilities of adsorbed molecules of phenolic compounds as compared with the molecules in solution. The adsorption entropy values of phenolic compounds for NJ-8 are lower than those for Amberlite XAD-4, which means the micropores of NJ-8 require more orderly arranged adsorbate.     

Monolayer films of PS-b-PEO diblock copolymers at the air/water- and an oil/water-interface

 Amphiphilic diblock copolymers consisting of a hydrophobic polystyrene block (PS) and a hydrophilic poly(ethylene oxide) block (PEO) with block sizes of 1000 or 3000 g/mol for both blocks were studied at the air/water and toluene/water interface. Measurements of the film pressure π of spread monolayers at the water surface reveal two limiting regimes of the π−a _m isotherms, in which the mean molecular area a _m is determined either by the size of the hydrophilic or the hydrophobic blocks of the PS-PEO molecules. The interfacial activity of the block copolymers at the toluene/water interface was studied by measuring the interfacial tension σ over a wide range of concentrations. Pronounced differences in the temperature dependence of the interfacial tension were observed, depending mostly on the block length of the hydrophilic PEO block. From the temperature dependence of σ it is inferred that for the block copolymers with the PEO block size of 3000 g/mol the phase inversion temperature (PIT) is well above 60 °C while for those with a PEO block size of 1000 g/mol the PIT is below or near 25 °C in the toluene/water system. Received: 5 February 1998 Accepted: 16 February 1998     

Thermal degradation of vinylidene chloride/[4-(t-butoxycarbonyloxy)phenyl]methyl acrylate copolymers

Vinylidene chloride polymers containing comonomer units capable of consuming evolved hydrogen chloride to expose good radical-scavenging sites might be expected to display greater thermal stability than similar polymers containing simple alkyl acrylates as comonomer. Incorporation of a comonomer containing the phenyl t-butyl carbonate moiety into a vinylidene chloride polymer has the potential to afford a polymer with pendant groups which might interact with hydrogen chloride to expose phenolic groups. Copolymers of vinylidene chloride with [4-(t-butoxycarbonyloxy)phenyl]methyl acrylate have been prepared, characterized, and subjected to thermal degradation. The degradation has been characterized by thermal and spectroscopic techniques. The degradation of vinylidene chloride/[4-(t-butoxycarbonyloxy)phenyl]methyl acrylate copolymers is much more facile than the same process for similar copolymers containing either [4-(isobutoxycarbonyloxy)phenyl]methyl acrylate or methyl acrylate, a simple alkyl acrylate, as comonomer. During copolymer degradation, [4-(t-butoxycarbonyloxy) phenylmethyl acrylate units are apparently converted to acrylic acid units by extensive fragmentation of the sidechain. Thus, the phenyl t-butyl carbonate moiety does function as a labile acid-sensitive pendant group but its decomposition in this instance leads to the generation of a phenoxybenzyl carboxylate capable of further fragmentation.     

超高交联吸附树脂吸附对硝基苯乙酮的热力学研究

比较两种超高交联聚苯乙烯吸附树脂NJ-8、AM-1与Amberlite XAD-4(以下简称XAD-4)对对硝基苯乙酮的静态吸附行为，根据吸附等温线研究了吸附热力学性质．在298～318K和研究的浓度范围内，NJ-8，AM-1、XAD-4对对硝基苯乙酮的吸附平衡数据符合Freundlich吸附等温方程．结果表明：吸附为放热过程，适当降低温度有利于吸附．计算了对硝基苯乙酮在NJ-8，AM-1、XAD-4树脂上的吸附焓变、自由能变，吸附熵变．对吸附行为作了合理的解释。