利用天然斜发沸石从高离子强度的强碱性溶液中吸附和洗脱K+和Rb+的研究

在80℃下，用间歇法研究了NH4^ 型天然斜发沸石对某厂高离子 强碱性循环液中的K^ 和Rb^ 的吸附，得到不同粒度天然斜发沸石对K^ 和Rb^ 的交换吸附量，用不同浓度的NH4HCO3溶液对沸石进行洗脱再生，是到洗脱速率随着洗脱液浓度增大而增大。本文对沸石与钾含量很高的高离子强度强碱性溶液中碱金属的交换吸附和洗脱过程进行了初步探讨。     

醋酸十二铵的吸附和SiO2悬浮液的稳定性

（1）测定了醋酸十二烷基铵（DAA）在CAB－O－SIL上的吸附，其等温线属双平台或LS型[1－3，5]；（2）NaCl的存在使DAA的吸附增加．但不影响其低浓度下第一平台的吸附量；HCl的存在则在全浓度范围内抑制了DAA的吸附，（3）测定了CAB－O－SIL颗粒在上述各溶液中的悬浮液的稳定性；（4）根据表面形成小胶团的吸附理论（即二步模型产）[2，3，5，]，并借助电导跟踪溶液中发生的变化，满意地解释了吸附和聚沉的实验结果．     

锌-硫氰酸盐-孔雀绿体系溶剂浮选机理及影响因素的探讨

本文通过对锌(Ⅱ)—硫氰酸盐—孔雀绿体系溶剂浮选过程的考察,提出了待测Zn~(2+)离子从水相被输送到有机相,可以用吸附机理和粘附机理来解释;同时还对影响锌溶剂浮选的主要因素:溶液的pH,气泡的大小和气体流速等进行了讨论。     

聚乙烯醇双胺肟螯合纤维的合成及其吸附性能

利用预辐接技法合成了聚乙烯醇双胺肟螯合纤维。研究了影响接枝率和胺肟基团含量的因素，讨论了吸附酸度、吸附时间对Ｃｕ（Ⅱ）离子吸附容量的影响。     

笼形聚偕胺肟树脂的研究HX／ACAO树脂吸附贵金属

氢卤酸、硝酸、硫酸、磷酸和硼酸处理的笼形聚偕胺肟树脂（ＨＸ／Ａ－ＣＡＯ）对Ａｇ＋和等贵金属离子的吸附能力按如下顺序：ＰｄＣｌ４２－：Ｈ３ＢＯ３／ＡＣＡＯ＞ＢＣＡＯ＞Ｈ３ＰＯ４／ＡＣＡＯ＞ＨＩ／ＡＣＡＯ＞Ｈ２ＳＯ４／ＡＣＡＯ＞ＨＣｌ／ＡＣＡＯ＞ＨＮＯ３／ＡＣＡＯ＞ＨＦ／ＡＣＡＯ．ＩｒＣｌ６２－：ＢＣＡＯ＞Ｈ３ＰＯ４／ＡＣＡＯ＞Ｈ３ＢＯ３／ＡＣＡＯ＞ＨＣｌ／ＡＣＡＯ＞ＨＦ／ＡＣＡＯ＞ＨＩ／ＡＣＡＯ＞Ｈ２ＳＯ４／ＡＣＡＯ≥ＨＮＯ３／ＡＣＡＯ．ＰｔＣｌ６２：ＢＣＡＯ＞Ｈ３ＢＯ３／ＡＣＡＯ＞Ｈ２ＳＯ４／ＡＣＡＯ＞ＨＮＯ３／ＡＣＡＯ＞ＨＣｌ／ＡＣＡＯ＞ＨＦ／ＡＣＡＯ＞Ｈ３ＰＯ４／ＡＣＡＯ＞ＨＩ／ＡＣＡＯ．Ａｇ＋：ＢＣＡＯ＞Ｈ３ＢＯ３／ＡＣＡＯ＞ＨＩ／ＡＣＡＯ＞Ｈ２ＳＯ４／ＡＣＡＯ＞ＨＦ／ＡＣＡＯ＞ＨＣｌ／ＡＣＡＯ＞Ｈ３ＰＯ４／ＡＣＡＯ＞ＨＮＯ３／ＡＣＡＯ．ＡｕＣｌ４－：ＢＣＡＯ＞Ｈ３ＢＯ３＞Ｈ３ＰＯ４／ＡＣＡＯ＞ＨＦ／ＡＣＡＯ＞ＨＣｌ／Ａ－ＣＡＯ＞Ｈ２ＳＯ４／ＡＣＡＯ＞ＨＩ／ＡＣＡＯ＞ＨＮＯ３／Ａ－ＣＡＯ．研究了Ｈ３ＢＯ３／ＡＣＡＯ树脂对Ａｇ＋和离子的吸附动力学，讨论了吸附机理．     

Thermal latency of novel chelating borate catalysts as latent catalysts for epoxy–phenolic resins

Novel quaternary ammonium bis(2‐oxybenzoyloxy)borate salts ( 1a – 1c ) or quaternary ammonium bis(1,2‐benzenedioxy)borate salts ( 2a and 2b ) with tetra‐n‐butylammonium (TBA⁺), tetra‐n‐octylammonium (TOA⁺), or bis(triphenylphosphoranylidene)ammonium (PNP⁺) cations were synthesized as latent catalysts of epoxy/phenol–novolac resins by the complexation between boric acid and salicylic acid or catechol, followed by neutralization with quaternary ammonium hydroxide. Polyaddition reactions of diglycidyl ether of bisphenol A (DGEBA) and 4,4′‐bisphenol F (44BPF) or bisphenol F (BPF‐D) with the ammonium borates were investigated as model reactions of epoxy/phenol–novolac resin systems with respect to the thermal latency and storage stability of the catalyst. The polyaddition of DGEBA/44BPF with 1a – 1c in diglyme at 150 °C for 6 h proceeded up to 85–96% conversions and gave polymers with number‐average molecular weights of 4180–10,500, whereas the polyaddition at 80 °C for 6 h gave less than 8% conversions. However, the polyaddition with 2a containing TBA⁺ cation proceeded to only a 32% conversion at 150 °C for 6 h in diglyme and to a 64% conversion even at 180 °C for 6 h in triglyme and only gave low molecular weight oligomers, and no reaction proceeded in the polyaddition at 80 °C. However, polyaddition with 2b containing PNP⁺ cation proceeded up to a 96% conversion at 150 °C for 6 h in diglyme and gave a higher molecular weight polymer with a number‐average molecular weight of 8050, whereas the polyaddition at 80 °C for 6 h gave only a 5% conversion. The catalytic activity of ammonium borates 1a – 1c and 2a and 2b depended on the borate anion structure: 1a and 1c with bis(2‐oxybenzoyloxy)borate anion revealed higher activity than 2a and 2b with bis(1,2‐benzenedioxy)borate anion, respectively. In comparison with tetra‐n‐butylammonium bromide (TBAB) as a conventional ammonium salt or tetra‐n‐butylammonium tetrakis(benzoyloxy)borate (TBA‐TBB), 1a – 1c and 2b revealed better thermal latency. The catalytic activity of ammonium borates also depended on the bulkiness of the ammonium cation, and the order of activity was 1c (PNP⁺) > 1b (TOA⁺) ≧ 1a (TBA⁺) and 2b (PNP⁺) > 2a (TBA⁺). The storage stability of DGEBA/BPF‐D with the ammonium borate catalysts 1a – 1c and 2a and 2b in bulk at 40 °C was much better than that with TBAB and TBA‐TBB. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2702–2716, 2002     

Prediction of adsorption of organic component and water vapour mixture onto activated carbon

A simple isotherm equation is derived for the adsorption of an organic component onto activated carbon in presence of water vapour. The theoretical results are compared with experimental data for toluene-water vapour-activated carbon, which were published byRipperger andGermerdonk [10].

---

Vorhersage der Adsorption einer organischen Komponente und Wasserdampf an Aktivkohle

Zusammenfassung Es wird eine einfache Adsorptionsisotherme abgeleitet, welche die gleichzeitige Adsorption eines organischen Stoffes und Wasser an Aktivkohle beschreibt. Die theoretischen Ergebnisse werden mit experimentellen Resultaten vonRipperger undGermerdonk [10] für Toluol-Wasser-Aktivkohle verglichen.

---

Symbols a _i adsorbate concentration in adsorbent, kg/kg of carbon - a _0i monolayer capacity, kg/kg of carbon - b _i kinetic parameter of theLangmuir equation - E _j adsorption energy in thej-th layer - i i-th component (1 — water vapour, 2 — organic compound) - j j-th layer - m number of layers - n number of adsorbed components - p partial pressure, Pa - p* saturation partial pressure, Pa - p _C water vapour partial pressure at begining of capillary condensation, Pa - surface coverage     

CZE separations of basic proteins at low pH in fused silica capillaries with surfaces modified by silane derivatization and/or adsorption of polar polymers

Mixtures of several basic proteins have been used to test CZE capillaries with surfaces modified by new pretreatment procedures; the performance obtained has been compared with that achieved using capillaries treated by procedures described in the literature. It has been shown that addition of non-ionic polyvinylalcohols (PVA) to CZE buffer solutions deactivates even bare, i.e. untreated, fused silica surfaces and renders them suitable for separations of basic proteins. The performance obtained from such surfaces was comparable with that of capillaries modified by the more elaborate procedures of etching, silanol derivatization, and/or adsorptive coating (again with polymers). A home-made device is described which enables derivatization and coating reactions to be performed on fused silica capillaries under an inert atmosphere, i.e. one free from oxygen and water.     

二甲胺修饰戊二醛交联壳聚糖树脂的制备及性能

研究了在均匀水相介质条件下，采用戊二醛稀溶液制备交联壳聚糖树脂的方法，并以三聚氯氰为活化剂，合成了二甲胺修饰戊二醛交联壳聚糖树脂．研究了该树脂的红外光谱及吸附性能．该树脂对铜(Ⅱ)和牛血清白蛋白(BSA)的吸附容量分别为42mg／g(干)和940mg／g(干)，其吸附行为均符合Freundlich等温吸附模型．该树脂制备工艺简单，机械强度较好，可作为金属离子或蛋白质分离纯化的吸附剂和色谱填料．     

Surface characterization of macroporous glycidyl methacrylate based copolymers by inverse gas chromatography

Two samples of macroporous crosslinked poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate), PGME, with different porosity parameters were synthesized by suspension copolymerization and modified by ring-opening reaction of the pendant epoxy groups with ethylene diamine, EDA. Inverse gas chromatography at infinite dilution was used for the determination of adsorption properties of PGME, and copolymer modified with ethylene diamine, PGME-en. Thermodynamic parameters of adsorption, dispersive components of the surface free energies, and the acid/base constants for the copolymer samples were calculated. The calculated dispersive surface energy values, , for PGME and PGME-en are comparable with the literature data for nonconductive polymers.