Ellipsometry studies of fibronectin adsorption

The adsorption of fibronectin on a series of different surfaces was investigated with in situ ellipsometry. For silica and methylated silica, the adsorbed amount (Γ), the adsorbed layer thickness (δ_el) and the mean adsorbed layer refractive index (n_f) were obtained by a procedure involving studies of the bare substrate at two different ambient refractive indices, as well as four-zone averaging. It was found that the adsorbed amount of fibronectin was the same (1.9 ± 0.1 mg m⁻²) on both silica and methylated silica surfaces. However, the adsorbed layers formed on methylated silica were more extended and had a lower average protein concentration than those formed on silica. Furthermore, on both silica and methylated silica, an increasing adsorbed amount is achieved both by a denser packing of the fibronectin molecules and by a growth of the adsorbed layer normal to the surface. Furthermore, the adsorption of fibronectin on lipid surfaces was investigated. It was found that the adsorption of fibronectin on phosphatidic acid was quite significant (2.2 ± 0.2 mg m⁻²), while that on phosphatidylcholine, phosphatidylinositol and phosphatidylserine was much smaller (all 0.1 ± 0.05 mg m⁻²). These results are correlated to findings on the adsorption of fibrinogen on these surfaces, as well as on the opsonization of lipid-stabilized colloidal particles.     

Monte Carlo simulation of adsorption of binary and quaternary alkane isomers mixtures in zeolites: Effect of pore size and structure

Grand canonical Monte Carlo and configurational bias Monte Carlo techniques were employed to simulate the adsorption of binary mixtures of butane isomers and quaternary mixtures in nine zeolites at 300 K. For binary mixtures the results show there is a critical pore size, which is 10-membered-ring about 5.6 Å. The channel sizes of BEA, ISV, MOR and CFI are larger than this critical pore size, they prefer i-butane than n-butane, whereas TON with smaller channel size than critical pore size prefers n-butane than i-butane, but its selectivity decreases with pressure increasing. MFI, MEL and TER prefer i-butane than n-butane at low pressure, but with pressure increasing, the selectivity is reversed. BOG prefers i-butane than n-butane but the selectivity decreased with pressure increasing. It demonstrates that the adsorption and selectivity are controlled by both pore size and pore structure. The n-butane–i-butane–n-pentane–2-methylbutane quaternary mixtures adsorbed in these nine zeolites were studied, and the results show alkane chain length dependence at low pressure, but the adsorption is controlled by pore size and structure with pressure increasing in all the zeolites except for TON and BOG.     

A chelating resin containing S, N and O atoms: Synthesis and adsorption properties for Hg(II)

A novel chelating resin containing S, N and O atoms (PSME-EDA) was synthesized by using poly(2-hydroxyethylmercaptomethylstyrene) (PSME) and diethanolamine (EDA) as materials. Its structure was characterized by elemental analysis, Fourier transform-infrared spectra (FTIR), scanning electron microscopy (SEM) and X-ray diffraction (XRD). The adsorption of the resin for Hg²⁺ was investigated. The saturated adsorption capacity of PSME-EDA for Hg²⁺ could reach to about 1.1 mmol/g at 25 °C when the initial Hg²⁺ concentration was 0.02 mol/l. Some factors affecting the adsorption such as temperature, reaction time and ion concentration were also studied. The results showed that adsorption was controlled by liquid film diffusion. The increasing of temperature was beneficial to adsorption. The Langmuir model was better than the Freundlich model to describe the isothermal process. The values of ΔG, ΔH, and ΔS calculated at 25 °C were −7.99 kJ mol⁻¹, 22.5 kJ mol⁻¹ and 34.4 J mol⁻¹ K⁻¹, respectively. The adsorption mechanism of PSME-EDA resin for Hg(II) was confirmed by X-ray photoelectron spectroscopy (XPS).     

Adsorption of<Emphasis Type="Italic"> N</Emphasis>-dodecyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethyl-3-ammonio-1-propanesulfonate (DDAPS), a model zwitterionic surfactant,on the Au(111) electrode surface

Electrochemical measurements including cyclic voltammetry, differential capacity, and chronocoulometry have been used to characterize the adsorption behaviors of the zwitterionic surfactant N-dodecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (DDAPS) on the Au(111) electrode surface. The thermodynamics of the ideally polarized electrode have been employed to determine the Gibbs excess and the Gibbs energy of adsorption. The results show that the adsorption of DDAPS has a multistate character. The first two states are observed at potentials close to zero charge. At low bulk DDAPS concentrations, it corresponds to the formation of a film of nearly flat adsorbed molecules. At higher concentrations it is converted into a hemimicellar state. The second state is formed at negative potentials and charge densities close to 0 C cm^–2. It corresponds to a film of tilted molecules oriented with the hydrocarbon tail towards the metal and the polar head toward the solution.Dedicated to Professor Zbigniew Galus on the occasion of his 70^th birthday and in recognition of his many contributions to electrochemistry.     

Protein adsorption in fused-silica and polyacrylamide-coated capillaries

The model proteins cytochrome c, myoglobin, ovalbumin, and beta-lactoglobulin were investigated with regard to their adsorption properties on capillaries for electrophoresis. The model compounds were selected to cover a wide range of properties. Cytochrome c is a basic protein (isoelectric point (pI): 9.6; M(r): 11.7 kDa), beta-lactoglobulin is rather acidic (pI: 5.4, M(r): 18.4 kDa), myoglobin was chosen as a neutral reference protein (pI: 6.8-7.4, M(r): 17.8 kDa), and ovalbumin (pI: 5.1, M(r): 45.0 kDa) was selected as a relatively larger analyte. First, the pH dependence of adsorption was investigated for the bare fused silica. A clear correlation to the respective pIs was noted. For myoglobin and ovalbumin, none or negligible adsorption was found above the pI, whereas strong adsorption was noted just below this parameter. Cytochrome c and beta-lactoglobulin already showed distinct adsorption above their pIs. However, none of the proteins showed any significant adsorption more than one pH unit above the pIs. For linear polyacrylamide-coated capillaries, a decreased but not a complete lack of adsorption was observed. Here, pH-dependent adsorption was noted as well. Regeneration of the capillaries by rinsing with buffers containing 200 mM SDS was also investigated. This method was completely successful for myoglobin, but that too for only freshly-adsorbed protein. After a storage time of 24 h and due to the aging of the adsorbate, a sufficient regeneration was no longer possible.     

气相渗透法中的溶质吸附效应

在气相渗透仪上，用四个低分子量有机化合物和五个已知平均分子量的窄分布聚苯乙烯低聚体，对ＶＰＯ方法中的溶质吸附效应作了研究，提出了一种对吸附效应作改正的方法．所得结果表明，在扣除溶质吸附效应后，仪器常数Ｋ无分子量依赖性，提高了测定低分子量聚合物数均分子量的准确性．     

饱和锌的粘土矿物吸附半胱氨酸的机理

用红外光谱、X射线衍射（XRD）和热分析研究了饱和过渡金属锌的粘土矿物吸附半胱氨酸的机理；XRD结果显示吸附了半胱氨酸后的粘土矿物的d(001)方向的距离明显增大，说明被吸附的半胱氨酸进入了粘土的层状结构之中；饱和了锌的粘土矿物吸附半胱氨酸有两种方式，其一为弱相互作用，另一种强相互作用；后一种方式吸附的半胱氨酸与粘土的过渡金属之间形成了配合结构，结合力比较强，在热作用下，它们一直到395℃左右才分解；强相互作用吸附的半胱氨酸主要是以去质子的两性离子和阴离子形式存在于粘土矿物上，与过渡金属形成螯合的六元环结构。     

Application of kinetic investigations for interpretation ofn-hexane and benzene adsorption on active carbon

Differencies between the mechanism ofn-hexane and benzene adsorption on active carbon were investigated on the ground of kinetic measurements. As it has been stated, the kinetic measurements show fundamental differencies between the mechanism of adsorption in spite of analogy existing in the state of adsorption equilibrium. Within the range investigated, only the adsorption ofn-hexane follows the model of volume filling of micropores. Existence of those differencies is also confirmed by measurements of effective diffusion coefficient values as well as changes of activation energy of the diffusion—adsorption process.

---

Anwendung kinetischer Untersuchungen zur Interpretation des Adsorptionsverhaltens vonn-Hexan und Benzol an Aktivkohle

Zusammenfassung Mittels kinetischer Messungen untersuchte man die Unterschiede im Mechanismus des Adsorptionsverlaufes vonn-Hexan und Benzol an Aktivkohle. Man stellte fest, daß trotz der Analogie im Adsorptionsgleichgewichtszustand die kinetischen Messungen auf prinzipielle Unterschiede im Adsorptionsmechanismus hinweisen. Im untersuchten Bereich verläuft nur die Adsorption vonn-Hexane nach dem Modell der Mikroporenvolumenausfüllung. Die auftretenden Unterschiede wurden auch durch die Berechnungen der Werte der effektiven Diffusionskoeffizienten sowie Änderungen der Aktivierungsenergie des Diffusions-Adsorptionsprozesses bestätigt.

     

Adsorption from binary solvent mixtures onto silica gel by HPLC frontal analysis

Summary The chromatographic technique of frontal analysis is applied to measuring adsorption from binary liquid mixtures by silica gel. The complete adsorption isotherm of a solvent mixture is obtained by measuring the break-through curves for a series of small concentration steps of the mobile phase. This method offers a direct way to determine the composition of the stationary phase in liquid-solid chromatography with mixed mobile phases. The surface excess isotherms of all binary systems formed by benzene, cyclohexane, and 1,2-dichloroethane, at the solution-silica gel interface at 25 °C are presented. The data of the three systems are shown to be thermodynamically mutually consistent.     

Interaction between the antibacterial compound,oleuropein, and model membranes

Oleuropein, a secoiridoid glycoside extracted from the olive tree, Olea europaea L., has been described as showing antibacterial properties. However, the exact mechanism of these antimicrobial properties is not yet well understood. In the present study, we have studied the interaction of oleuropein with phosphatidylglycerol (PG) as a model membrane for Staphylococcus aureus (S. aureus) (Gram-positive bacteria) and phosphatidylethanolamine and Escherichia coli (E. coli) lipid extract as a model membrane for E. coli (Gram-negative bacteria). The study has been carried out using monolayers as model membranes and using kinetics at constant area and compression isotherms with Brewster angle microscopy (BAM) observations. The results show that oleuropein interacts in higher extent with PG monolayers, which is related with its stronger antibacterial effect against Gram-positive bacteria. The effects on the membrane are probably produced at the cell surface because oleuropein did not form stable mixed monolayers with the lipids assayed at the air/water interface.