Thermodynamics of the dissociation of Bis H+ in seawater from 5 to 40°C

Electromotive-force measurements of cells without transference were used to determine the dissociation constant of the protonated form of the weak base 2-amino-2-methyl-1, 3-propanediol (Bis) in synthetic seawaters corresponding to salinities of 20, 35, and 45. Hydrogen electrodes and silver-silver chloride electrodes were used, together with standard potentials determined in an earlier investigation. The pK increases in linear fashion with the salinity (S) of the medium, for values of S from 0 to 45. The solvent effect is given by 8.802+0.00378S at 25°C with a mean deviation of 0.001. The medium effect of seawater on H° at 25°C is less than 200 cal-mol^–1 and less than 0.2 cal-^oK-mol^–1 on S°.     

酸性模拟油的油水界面扩张粘弹性研究

考察了不同链长脂肪酸模拟油的扩张模量随扩张频率的变化规律,研究了碱和十二烷基磺酸钠对酸性模拟油界面扩张性质的影响.结果表明,不同脂肪酸模拟油的扩张模量随扩张频率和碳链长度的增加而增大.水相中加入十二烷基磺酸钠对酸性模拟油的扩张模量影响不大,对低工作频率下相角影响较大.无论有无十二烷基磺酸钠,水相中加入NaOH的浓度较低时酸性模拟油的扩张模量变化不大;NaOH浓度较高时,酸性模拟油的界面扩张模量增加,慢弛豫过程在界面上起主要作用,此时界面上可能形成了特殊结构.     

土壤淋溶柱色谱中同系物、氯代苯保留值与流动相组成、沸点的交点规律

基于土壤淋溶柱色谱符合logk'-ψ的线性保留方程,在同系物（正构烷基苯、甲基苯）和氯代苯中,同类溶质与固定相（土壤）和淋洗剂（甲醇-水）有相似的作用方式,所以溶质保留值（logk'）与淋洗剂有机调节剂浓度间存在浓度交点,与沸点间存在沸点交点规律,并用实验进行了验证。     

电感耦合等离子体质谱(ICP-MS)法测定离子吸附型稀土矿中的浸出稀土元素

对浙江某地大量的离子吸附型稀土样品进行了稀土元素(Y,La,Ce,Pr,Nd,Sm,Eu,Gd,Tb,Dy,Ho,Er,Tm,Yb,Lu)的浸提和测定实验,实验对比了氯化铵和硫酸铵溶液对矿石中稀土元素的浸出性能,选择了杂质浸出较少的硫酸铵溶液作为浸出剂,对不同稀土含量的吸附型稀土矿进行了实验,浸出方法稳定,符合工业开采要求。实验了电感耦合等离子体质谱法测定浸出液中稀土元素分量的方法,浸出液经大比例稀释并酸化后测定,精密度较好,能满足离子吸附型稀土矿评价的质量要求,方法检出限(6σ)0.005~0.26μg/g,单元素测定精密度(n=6,RSD≤6.0%),浸出稀土元素总量测定RSD≤4.0%。实际样品的实验及测定结果满意。     

Surface antimicrobial modification of polyamide by poly(hexamethylene guanidine) hydrochloride

Antimicrobial polyamide (PA) received much attention for the demand of packaging and biomedical fields. In this paper, an antimicrobial PA6 membrane was prepared via a surface chemical reaction. A highly effective antibacterial component (PHMG‐E) with terminal epoxy group was firstly synthesized via a reaction between polyhexamethylene guanidine hydrochloride (PHMG) and ethylene glycol diglycidyl ether (EGDE). Then, PHMG‐E was bonded on the surface of PA6 membrane with secondary amine reduced by borane‐tetrahydrofuran (BH₃‐THF). The antimicrobial rates of surface‐modified PA6 membrane (PA6‐PHMG) against Escherichia coli and Staphylococcus aureus were both higher than 99.99%, and the PHMG was non‐leaching due to the chemical bonding. The hydrophilicity of antibacterial PA6 membrane was also significantly improved and the mechanical performance became better.     

A novel technique for scaffold fabrication: SLUP (salt leaching using powder)

In this study, we proposed a novel salt-leaching method using PCL and NaCl powders, known as the SLUP (salt leaching using powder) technique, which has several advantages: this technique does not require solvent, pressure, or unnecessary expensive devices. First, PCL powder (100–180 μm size) and NaCl powder (350–400 μm size) were prepared. Second, the PCL and NaCl powders were mixed at a certain ratio, and then the mixed powder was poured into a mold. Afterward, the mold was heated to melt the PCL powder in an oven at 80 °C for 15 min. Subsequently, after the PCL/NaCl mixture was separated from the mold, the PCL/NaCl mixture was soaked in D.I. water for 24 h to leach out the NaCl particles. Consequently, the remaining PCL structure was porous and could be used as a scaffold. To analyze the compressive modulus of the fabricated scaffold, a uniaxial compression test was performed using a UTM (universal testing machine), and the surface characteristics of the scaffold were observed using an SEM (scanning electron microscope). Additionally, cell-culture experiments were performed using hMSCs (human mesenchymal stem cells), and the cell-culture characteristics were assessed and compared with the characteristics from a conventional salt-leaching scaffold.     

金刚石线锯切割多晶硅片表面特性与酸刻蚀制绒问题

为解决金刚石切割多晶硅片与常规HF-HNO3-H2O混合酸湿法制绒技术不兼容的问题,对金刚石切割多晶硅片的表面特性和大幅度提高混合酸溶液中HF的比例进行了刻蚀制绒实验.结果表明,金刚石线切割多晶硅片表面存在约33%的光滑条带区域,其余为与砂浆切割硅片表面相近的粗糙崩坑区域;这些光滑区域使得金刚石切割多晶硅片表面光反射率比砂浆切割多晶硅片高3%~4%;而且光滑区域在富HNO3和富HF的HF-HNO3-H2O混合酸溶液中均较难于腐蚀,使其刻蚀制绒后反射率比砂浆切割多晶硅片低1%~2%,制绒后的金刚石切割多晶硅片反射率比制绒后的砂浆切割多晶硅片高4%~6%,不能满足太阳电池生产要求.富HNO3和富HF两种酸刻蚀体系,均不能解决金刚石切割多晶硅片的制绒问题.     

Manipulating OH−-Mediated Anode-Cathode Cross-Communication Toward Long-Life Aqueous Zinc-Vanadium Batteries

The anode-cathode interplay is an important but rarely considered factor that initiates the degradation of aqueous zinc ion batteries (AZIBs). Herein, to address the limited cyclability issue of V-based AZIBs, Al₂(SO₄)₃ is proposed as decent electrolyte additive to manipulate OH⁻-mediated cross-communication between Zn anode and NaV₃O₈ ⋅ 1.5H₂O (NVO) cathode. The hydrolysis of Al³⁺ creates a pH≈0.9 strong acidic environment, which unexpectedly prolongs the anode lifespan from 200 to 1000 h. Such impressive improvement is assigned to the alleviation of interfacial OH⁻ accumulation by Al³⁺ adsorption and solid electrolyte interphase formation. Accordingly, the strongly acidified electrolyte, associated with the sedated crossover of anodic OH⁻ toward NVO, remarkably mitigate its undesired dissolution and phase transition. The interrupted OH⁻-mediated communication between the two electrodes endows Zn||NVO batteries with superb cycling stability, at both low and high scan rates.     

Co−Co Dinuclear Active Sites Dispersed on Zirconium-doped Heterostructured Co9S8/Co3O4 for High-current-density and Durable Acidic Oxygen Evolution

Developing cost-effective and sustainable acidic water oxidation catalysts requires significant advances in material design and in-depth mechanism understanding for proton exchange membrane water electrolysis. Herein, we developed a single atom regulatory strategy to construct Co−Co dinuclear active sites (DASs) catalysts that atomically dispersed zirconium doped Co₉S₈/Co₃O₄ heterostructure. The X-ray absorption fine structure elucidated the incorporation of Zr greatly facilitated the generation of Co−Co DASs layer with stretching of cobalt oxygen bond and S−Co−O heterogeneous grain boundaries interfaces, engineering attractive activity of significantly reduced overpotential of 75 mV at 10 mA cm⁻², a breakthrough of 500 mA cm⁻² high current density, and water splitting stability of 500 hours in acid, making it one of the best-performing acid-stable OER non-noble metal materials. The optimized catalyst with interatomic Co−Co distance (ca. 2.80 Å) followed oxo-oxo coupling mechanism that involved obvious oxygen bridges on dinuclear Co sites (1,090 cm⁻¹), confirmed by in situ SR-FTIR, XAFS and theoretical simulations. Furthermore, a major breakthrough of 120,000 mA g⁻¹ high mass current density using the first reported noble metal-free cobalt anode catalyst of Co−Co DASs/ZCC in PEM-WE at 2.14 V was recorded.     

海泡石制备HMS和AlSBA介孔分子筛的研究

通过酸浸和模板合成处理，海泡石直接合成有序介孔二氧化硅和含铝的介孔二氧化硅. 海泡石用盐酸处理后120 ℃下在NaOH溶液中处理72 h, 得到具有HMS结构特征的介孔分子筛；在含铝的碱性溶液中处理后得到具有AlSBA结构的介孔分子筛. 并用SAXRD、BET、TPD表征了介孔分子筛的物相结构、比表面积、孔径分布和表面酸性. 两种介孔分子筛的比表面积分别为508 m2•g^-1和946 m2•g^-1，孔径分别为3.4 nm和3.9 nm，且孔径分布窄. NH3-TPD结果表明分子筛表面都有两个酸中心，随着Al原子的引入，表面酸性增强.