General Formation of Macro-/Mesoporous Nanoshells from Interfacial Assembly of Irregular Mesostructured Nanounits

Mesoporous core–shell nanostructures with controllable ultra-large open channels in their nanoshells are of great interest. However, soft template-directed cooperative assembly to mesoporous nanoshells with highly accessible pores larger than 30 nm, or even above 50 nm into macroporous range, remains a significant challenge. Herein we report a general approach for precisely tailored coating of hierarchically macro-/mesoporous polymer and carbon shells, possessing highly accessible radial channels with extremely wide pore size distribution from ca. 10 nm to ca. 200 nm, on diverse functional materials. This strategy creates opportunities to tailor the interfacial assembly of irregular mesostructured nanounits on core materials and generate various core–shell nanomaterials with controllable pore architectures. The obtained Fe,N-doped macro-/mesoporous carbon nanoshells show enhanced electrochemical performance for the oxygen reduction reaction in alkaline condition.     

K-Dependence and temperature dependence of N2-, H2-, and He-broadening coefficients for the J = 12-11 transition of acetonitrile CH3CN located near 220.7 GHz

Extensive experiments on the K = 3 component of the J = 12-11 rotational transition of acetonitrile CH₃C¹⁴N, located near 220.7 GHz, were performed at different temperatures in the range 235-350 K. They allow determining the N₂-, H₂-, and He-broadening coefficients, as well as their temperature dependences. More specific measurements on all the K-components of the involved transition perturbed by N₂ at 303 K allow to point out a clear decreasing of the broadening coefficient with increasing K. Narrowing effects are clearly observed, and experimental lines were analysed both with Voigt and speed dependent Voigt profiles; but no exhaustive lineshape study was carried out. All the experimental parameters are compared with results derived from a semiclassical calculation of collisional interactions, including electrostatic, induction, and dispersion energy contributions.     

Multilayered Cu–Ti deposition on silicon substrates for chemiresistor applications

Abstract

On the perspective to develop CuO–TiO₂ MOS, multilayered Cu and Ti thin layers were alternatively deposited on silicon wafers using 25?keV Ar?+?ion beam sputtering and, subsequently, oxidized by thermal annealing in air at 400?°C for 24?h. The deposited films have variable ratios of the Cu and Ti % at. One of the main goal is to obtain such multilayers avoiding the presence of Cu–Ti–O compounds. The samples were characterized in terms of composition (by RBS and SIMS analyses) and morphology (by AFM and SEM investigations). In particular, SIMS maps allows to observe the spatial distribution and thickness of each phase of the Cu/Ti multilayers, and further to observe Cu diffusion and mixing with Ti, as well as phase separation of CuO and TiO₂ in the samples. The reasons of this effect represent an open issue that has to investigated, in order to improve the MOS fabrication.     

Synthesis,Vibrational Spectrum and Structure of the Tetracyanoborate K[B(CN)4]·CH3CN

The new tetracyanoborate K[B(CN)₄]·CH₃CN was synthesized by dissolution of the solvent‐free K[B(CN)₄] in acetonitrile and subsequent careful crystallization. The crystal structure has been determined by single‐crystal X‐ray diffraction. It crystallizes in the orthorhombic space group P2₁2₁2₁ with Z = 4. Some comparisons with related structures are made, and the vibrational spectrum is discussed.     

Reaction des lithiens avec les organophosphores. Reaction d'addition du t-butyllithium sur le noyau benzenique des sels de phenylphosphoniums

A new reaction of organolithium compounds with phosphonium salts is described; reaction of t-butyllithium with dibenzylaminophosphonium or tetraphenylphosphonium bromides takes place through addition of the t-butyl group on a benzene ring at the position para to the phosphorus atom, the ylid formed reacts in a characteristic Wittig reaction with p-tolylaldehyde.     

Development of new solid-phase microextraction fibers by sol-gel technology for the determination of organophosphorus pesticide multiresidues in food

Allyloxy bisbenzo 16-crown-5 trimethoxysilane was first used as precursor to prepare the sol-gel-derived bisbenzo crown ether/hydroxyl-terminated silicone oil (OH-TSO) SPME coating. The coating procedure involving sol solution composition and conditioning process was presented. Compared with commercial SPME stationary phases, the new coatings showed higher extraction efficiency and therefore could provide higher sensitivity for organphosphorous pesticides (OPs). Limits of detection (LODs) were in the range of 0.003-1.0 ng/g for these OPs in food samples (honey, juice, orange and pakchoi). The optimal extraction conditions of the new coatings to OPs in these samples were investigated by adjusting extraction time, salt addition, extraction temperature, and dilution ratios of samples with distilled water by using SPME coupled with gas chromatography (GC)-flame photometric detection (FPD). The method was applied to determine the concentrations of OPs in real samples.     

Partial molar enthalpy properties and correlation of excess molar enthalpy data of acetonitrile + diethylamine or S-butylamine mixtures at various temperatures and atmospheric pressure

Experimental data of excess molar enthalpy of binary mixtures of acetonitrile + diethylamine or S-butylamine mixtures as a function of composition at 288.15, 293.15, 298.15 and 303.15 K at atmospheric pressure have been used to calculate excess partial molar enthalpy and partial molar enthalpy of each component as a function of composition as well as partial molar enthalpy properties at infinite dilution. The Flory and Prigogine–Flory–Patterson (PFP) theories were applied to correlate the data. The results of the calculations as well as the influence of temperature and isomers chain on the partial molar enthalpy properties are discussed.     

Two-dimensional catena–polymer [[[bis (µ-aqua)(bis (µ-cpiap-K2O1:O2)sodium(I))] (µ-chlorido) bis(µ-cpiap-K5N1:O1:O2:O3,O3′)dicopper(II)]bis(µ-aqua)(aqua)bis(cpiap-K2O1,O2)copper(II)] hexa hydrate

The new title two-dimensional hetero-tetra nuclear Cu₃–Na coordination polymer {[NaCu₃Cl(cpiap)₂(H₂O)₃]_n·6nH₂O} (1) consists of crystallographically two-independent copper(II) centers, each bridged by a sodium cation through carboxylate-oxygen of the deprotonated H₃cpiap ligand (H₃cpiap = 2-(carboxyphenyl)iminoaceticpropanoic acid) to Cu^II (2) and Cu^II (2⁻) cations, and through water molecules to Cu^II (1) cation. Cu^II (2) and Cu^II (1) cations are bridged by carboxylate-oxygen atoms of the ligand in a syn-anti mode which, alternate regularly within the chain being bridged by a tetra coordinated sodium cation. Each Cu^II (2) and Cu^II (2⁻) cation in (1) is in an octahedral environment formed by four carboxylate-oxygens from two cpiap³⁻ ligands, one nitrogen atom and a bridging chloride atom. Cu^II (1) cation is in a square pyramidal environment formed by three water molecules and two carboxylate-oxygens from two cpiap³⁻ ligands. The ligand acts simultaneously as monodentate and tridentate toward Cu^II (1) and Cu^II (2) cations respectively. The lattice water molecules involved in OH···O hydrogen bonding are situated in the void spaces between layers. The zigzag chains, which run along the b-axes further construct three-dimensional metal-organic framework via hydrogen bonding and weak face-to-face π-π interactions. Weak CH···O interactions are also present.     

Electrochemical Behavior of Diphenyl Disulfide and Thiophenol on Glassy Carbon and Gold Electrodes in Aprotic Media

The investigation of the electrochemical reduction processes of C₆H₅SSC₆H₅ and C₆H₅SH in CH₃CN using cyclic voltammetry indicates a different behavior on GC and Au electrodes. On GC surface adsorption phenomena are absent, the electrochemical reduction process is irreversible and diffusion controlled. For both the starting molecules the same species, C₆H₅S^?, is formed upon reduction. The E° values of the reduction processes were determined by convolution method and the standard free energy of the S? S bond of C₆H₅SSC₆H₅ estimated. On Au surface instead, a self‐assembled monolayer of C₆H₅SAu_ads originated after the S? S or S? H bond breaking can be observed by simply dipping the electrode in solution of C₆H₅SSC₆H₅ and C₆H₅SH, respectively. The properties of the SAM were investigated by electrochemical reduction of the adsorbed thiolates. On Au electrode the reduction processes involve C₆H₅SAu_ads and give rise to desorbed C₆H₅S^?. A neutral radical is obtained by electrochemical oxidation of thiolate anion. It reacts rapidly with the electrode surface to give the S‐Au bond again.