Implementation and efficiency of an automatic peak-purity-control procedure in HPLC-UV-VIS-coupling based on principal component analysis

Summary Based on a thorough knowledge of the actual system precision significance testing of the primary eigen values, resulting from principal component analysis of the two-dimensional data array of HPLC with photodiode-array detection, is a powerful means to uncover unresolved chromatographic peaks. The implementation of this chemometric technique for assuring peak homogeneity and results showing the efficiency for two-component peaks in regard to spectral characteristics, chromatographic resolution and absorbance ratio of the investigated compounds are presented.     

Relationship between the molybdenum phases and the conversion of n-butane over Mo/HZSM-5

The conversion of n-C₄H₁₀ was undertaken on MoO₃/HZSM-5 catalyst at 773–973 K and the phases of molybdenum species were detected by XRD. The XRD results show that bulk MoO₃ on HZSM-5 can be readily reduced by n-C₄H₁₀ to MoO₂ at 773 K and MoO₂ can be gradually carburized to molybdenum carbide above 813 K. The molybdenum carbide formed from the carburization of MoO₂ with n-C₄H₁₀ below 893 K is -MoC_1−x with fcc-structure, while hcp-molybdenum carbide formed above 933 K. During the evolution of MoO₃ to MoO₂ (>773 K) or the carburization of MoO₂ to molybdenum carbide (>813 K), deep oxidation, cracking and coke deposition are serious, in particular at higher reaction temperatures, these lead to the poor selectivity to aromatics. Aromatization of n-C₄H₁₀ can proceed catalytically on both Mo₂C/HZSM-5 and MoO₂/HZSM-5, the distribution of the products for the two catalysts is similar below 813 K, but the activity for Mo₂C/HZSM-5 is much higher than that for MoO₂/HZSM-5.     

The regioselectivity of the formation of 2-pyrazolylthiazoles and their precursors from the reaction of 2-hydrazinothiazoles with 4,4,4-trifluoro-1-hetaryl-1,3-butanediones

Reaction of 2-hydrazinothiazoles 1 with 1-thienyl- and 1-furyl-1,3-butanediones 2a,b in methanol in the presence of hydrochloric acid mainly leads to a mixture of pyrazoles 3 and pyrazolines 4 or pyrazoles 3 and 5 in strong acidic conditions. Isomeric hydrazones 6 and pyrazolines 4 were formed and isolated in these reactions in the absence of hydrochloric acid. It has been shown that the regioselectivity in the reaction of diketones 2 with hydrazine 1 is governed by both the concentration of acid and the nature of substituents in the 1,3-diketones 2. Cyclization of hydrazones 6 is shown to occur under milder conditions than dehydration for pyrazolines 4. The new heterocyclic compounds were prepared and fully characterized by NMR spectra and by X-ray analysis for 3c.     

Photoinitiators with functional groups. V. New water‐soluble photoinitiators containing carbohydrate residues and copolymerizable derivatives thereof

The synthesis of new water‐soluble photoinitiators (PIs) based on hydroxyalkylphenones, benzophenones, and thioxanthones with carbohydrate residues such as glucose, cellobiose, and 1‐amino‐1‐deoxy‐D ‐glucitol (glucamine) is described. In addition, selected initiators were reacted with methacryloyl chloride to obtain copolymerizable initiators with improved migration stability. Results from photo differential scanning calorimetry and gel‐content measurements in commercially available water‐thinnable and emulsion‐type resins as well as 2‐hydroxyethyl acrylate are included. Glucose‐modified PIs gave the best results with respect to compatibility with the resin, reactivity, and gel content. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1504–1518, 2002     

Propane/propylene separation by selective olefin adsorption on Cu/SBA-15 mesoporous silica

Samples of mesoporous silica, SBA-15, were prepared under hydrothermal conditions and Cu cations were incorporated into the framework by two different impregnation techniques. The corresponding adsorption/desorption isotherms of propylene, propane, and N₂ were measured to evaluate the material's effectiveness in the separation of propane/propylene mixtures. Adsorption uptake of propylene increased and that of propane decreased in Cu containing samples as compared to the uptakes observed in undoped SBA-15 samples. It was demonstrated that the presence of Cu atoms in the adsorbent lattice led to a greater selectivity towards propylene. Furthermore, the highest level of Cu(I) were obtained in samples prepared by equilibrium impregnation, which in turn improved the olefin/paraffin uptake ratio. Under some working conditions, the amount of propylene adsorbed in selected samples is totally reversible while propane uptake was negligible.     

Optimization of inoculum to substrate ratio for enhanced methane yield from leather fleshings in a batch study

One of the most significant issues of the last few decades has been tracing for renewable energy sources. Animal fleshing (ANFL) is the most common proteinaceous solid waste accured during the production of leather and it must be disposed of in an environmentally responsible manner. This paper is attempts to assess the biogas production from solid waste originating from the chrome based tannery. Anaerobic digestion of these wastes will be a viable option for waste stabilization and energy production in the form of biogas to be utilized in the industry. The bio-methane potential of the wastes were examined by mixing these wastes with various sources of inoculum and different inoculum to substrate (I/S) ratio considered. The batch experiments were carried out in 2.5 l glass reactors with a various source of inoculumviz., Cow Dung (CD), Elephant Dung (ED) and Bio-Digested Slurry (BDS) with varied inoculum to substrate (LFs) ratios for a retention time of 50 days with replications. The results obtained from the experiments showed that BDS:LF (25:75) had the highest gas production of 14505 ml (651.85 ml CH₄g^?1 VS) followed by CD:LF (50:50) produced 12072.5 ml (789.36 ml CH₄g^?1 VS) and ED:LF (75:25) produced 11252.5 ml (1492.08 ml CH₄g^?1 VS)with a methane content of 63.77, 61.92 and 62.72%, respectively.     

Can the presence of chemically inert species modify the face selectivity in asymmetric induction by cyclodextrins?

Reduction of-cyclodextrin (-CD) aromatic ketone (acetophenone and acetonaphthones) inclusion compounds were carried out in the presence of a large number of chemically inert species as potential co-guests. In several cases, it was observed that stoichiometric molar ratios of these compounds to ketone significantly modify the chiral induction yielding the inverted alcohol enantiomer and increasing the face selectivity. The results were found to depend strongly on the respective structure and shape of both the ketone and the additive, and on the molar ratio of-CD:ketone:third compound. These observations suggest the formation of a three-component inclusion complex in which the geometry of binding of the substrate and its mobility are changed with respect to the binary system.     

Chemical applications of group theory and topology

The following procedure is described for investigating the qualitative dynamics of simple chemical systems: 1) A so-called influence diagram is generated representing the relationships between the reference reactants (phase-determining intermediates); 2) This influence diagram is used to generate a truth table indicating possible transitions between state vectors representing the signs of the time derivatives of of the reference reactant concentrations; 3) The truth table is used to determine a state transition diagram representing the flow topology around unstable equilibrium points; 4) The characteristic equation of the adjacency matrix of the influence diagram is solved in order to determine the presence of such unstable equilibrium points. The two types of qualitative dynamics possible for chemical systems containing two reference reactants and one feedback circuit are bifurcation between two attracting regions (bistability) and limit cycle oscillation. However, in two reference reactant systems oscillation requires an additional self-activating loop to generate the unstable equilibrium point required for its realization. Bistability and limit cycle oscillation are also two of the possible types of qualitative dynamics for chemical systems containing three reference reactants. However, chemical systems with three reference reactants and two or more feedback circuits can also contain interlocking limit cycles, which can lead to toroidal oscillations or chaos. The influence diagrams are given for the systems exhibiting these various types of dynamic behavior along with a summary of the important properties of all 729 possible influences for simple chemical systems containing three reference reactants.     

热处理对Co(Ni)-Mo/Al2O3催化剂加氢脱硫活性的影响

介绍了硫化Ｃｏ－Ｍｏ／Ａｌ２Ｏ３催化剂的热处理方法及其结果。实验表明，硫化催化剂经热处理后，加氢脱硫活性明显增加，以塞吩转化率表示的催化活性随处理温度升高而变化，在４５０℃时观察到催化活性的极大值。     

含吡啶环系西佛碱大环配合物和氮杂大环自由配体的合成

2,6-二羟甲基吡啶(1)经活性MnO_2氧化得到2,6-二甲酰基吡啶(2)。邻硝基苯酚与N-取代的二(氯乙基)胺在DMF溶液中反应,得到N-取代的1,5-二(邻硝基苯氧基)-3-氮杂戊烷(3a～3c),再经水合肼/Raney Ni还原,获得N-取代的1,5-二(邻氨基苯氧基)-3-氮杂戊烷(4a～4c)。利用Ba~(2 )作为模板离子,(2)分别与(4a～4c)反应,合成了一类新的含吡啶环系西佛碱大环配合物Ⅰ～Ⅲ,配合物Ⅰ、Ⅲ经与NaBH_4的乙醇溶液还原解络,得到氮杂大环自由配体Ⅳ和Ⅴ。所有西佛碱大环配合物和氮杂大环自由配体均经元素分析、IR、~1H NMR、MS等证实了它们的结构和组成。