Decentered twisted Gaussian Schell-model beams and their propagation through a misaligned first-order optical system

The propagation properties of decentered twisted Gaussian Schell-model (DTGSM) beams passing through a misaligned first-order optical system are studied. The explicit expressions for the cross-spectral density function and Wigner distribution function of the output beam are derived, which retain their form unchanged. It is shown that the DTGSM beams preserve their closed property. The second-order moments matrix and the Wigner distribution function evolve with the usual laws, whereas the first-order moments matrix varies, as if a ray passes through such system. The propagation of DTGSM beams through an aligned first-order optical system is treated as the limiting case that corresponds to the vanishing misalignment parameters.     

BP人工神经网络用于除草剂活性预测

采用AMI方法研究了10种新型的磺酰脲类除草剂的电子结构，并以原子的Mulliken净电荷和除草剂在不同浓度(100，10mg／L)下对油菜、稗草两种作物的根、茎部位的抑制率为训练样本集。构造并训练得到具有活性预测能力的BP神经网络．结果表明，该BP网络不仅能对训练样本很好拟合。亦能对未知化合物的活性作出很好的预测．     

锥形光纤的偏振特性

随着光通信技术的不断发展，光纤的应用越来越广泛，而锥形光纤以其独特的传光方式越来越多地应用于光纤连接、成像及测量等领域。实验测定了不同锥角和不同长度锥形光纤的偏振特性。理论上，根据麦克斯韦方程组以及边界条件给出了光在理想光纤中的场分布，阐明了实际光纤中光的传输特性。论证了锥形光纤长度与其偏振特性的关系，进而利用几何光学方法对锥形光纤锥角与其偏振特性的关系作了定性说明。并用具体数据进行了定量计算，得出偏振光经锥形光纤传输或耦合后再传输到其终端所得到均是椭圆偏振光的结论。     

求解非对称线性方程组的QMRGCGS方法

1 引言 求解非对称线性方程组Ax=b的双共轭梯度方法(BCG)[3]和它的变形共轭梯度平方方法(CGS)[6]都有典型的不规则收敛行为,后来Freund和Nachtigal提出一种BCG类方法,即拟极小剩余方法(QMR)[7],用来补救BCG方法的收敛性并且产生了光滑的收敛曲线。然而,象BCG方法一样,QMR方法要用到系数矩阵A及其转置A~T与向量的乘积,为了解决这一问题,Freund提出TFQMR方法,此方法具有拟极小剩余性,同时不需用到A~T与向量的乘积。     

A new property of Bernstein-Kantorovi? operators

In the present paper, we prove that the Bernstein-Kantorovič operators have the ability of preserving translation property in both C and L^p norms. Supported (in part) by the NSFC(10471130,10371024) of PRC and the Natural Science Foundation (Y604003) of Zhejiang Province.     

Zur Synthese und Struktur von K3N

Synthesis and Structure of K₃N Two phases in the binary system K/N have been obtained via co‐deposition of potassium and nitrogen onto polished sapphire at 77 K and subsequent heating to room temperature. The powder diffraction pattern of one of these phases can be satisfactorily interpreted by assuming the composition K₃N, and the anti‐TiI₃ structure‐type, which is also adopted by Cs₃O. The resulting hexagonal lattice constants are: a = 779.8(2), c = 759.2(9) pm, Z = 2, P6₃/mcm. Comparison with possible structures of K₃N generated by computational methods and refined at Hartree‐Fock‐ and DFT level, reveals that the energetically most favoured structure has not formed (presumable Li₃P‐type), but instead one of those with very low density. In this respect, the findings for K₃N are analogous to the results on Na₃N. The thermal evolution of the deposited starting mixture has been investigated. Hexagonal K₃N transforms to another K/N phase at 233 K. Its XRD can be fully indexed resulting in an orthorhombic cell a = 1163, b = 596, c = 718 pm. Decomposition leaving elemental potassium as the only residue occurs at 263 K.     

Predicting vibration signals of automobile engine using chaos theory

Condition monitoring and life prediction of the vehicle engine is an important and urgent problem during the vehicle development process. The vibration signals that are closely associated with the engine running condition and its development trend are complex and nonlinear. The chaos theory is used to treat the nonlinear dynamical system recently. A novel chaos method in conjunction with SVD (singular value decomposition)denoising skill are used to predict the vibration time series. Two types of time series and their prediction errors are provided to illustrate the practical utility of the method.     

Fatigue Loading and Life Prediction in Three Fretting Fatigue Fixtures

Three fixtures for conducting laboratory fretting fatigue tests are described and their respective testing methods and the results of the analysis are compared. Each of these fixtures has been used to investigate the effects of various parameters of interest in fretting fatigue. These fixtures include a unique apparatus in which all load applied to the specimen is transferred to the fretting pads, an apparatus similar to many found in the literature where partial load transfer occurs across the pads, and a simplified dovetail fixture in which the clamping load, P, and the shear load, Q, are varied in phase. Select test conditions from prior experiments performed on identical material and resulting in similar lives ranging from one to ten million cycles from these fixtures are identified. The various testing conditions were used to compute the unique stress field for each case. The resulting contact stresses were used to calculate crack initiation based criteria, and to calculate stress intensity factors. The three fixtures were shown to be able to accommodate a range of loads, fretting pad contours, and specimen geometries that produced a variety of stress fields. A crack-initiation-based criterion was shown to predict the failure lives of thinner specimens accurately. The stress intensity factor calculations showed the possibility of a crack arresting for a stress field that decays rapidly and the possibility of a local minimum for K as a function of depth. The fixtures are shown to be complementary in generating data for development of robust fretting fatigue models that use these criteria.     

Enhancement of Overall Photovoltaic Efficiency by Changing the Position of the Attaching Group -RSO3- on the Hemicyanine Dye Molecules

A new photoresponsive D-π-A dye, mPS, has been designed and synthesized.Compared to the parent dye PS, IPCE values in the region from 400 nm to 560 nm was greatly improved upon changing the attaching group from the p- position to the o- position of the π-conjugation bridge. A solar cell based on mPS generated a remarkably high overall yield η of 5.4% under irradiation of 80.0 mW cm^-2 white light from a Xe lamp, Compared with PS, the overall yield η increased by 64%.     

Long-Term Prediction of Creep Strain of Expanded Polystyrene

Data obtained in investigating the creep of expanded polystyrene in compression are discussed. An analysis of the results of creep tests 65–608 days long showed that the creep can be predicted for 50 years based on experiments of less duration than the 605 days indicated in EN 13163. For this purpose, it is suggested to employ a 95-fold extrapolation in time if the creep curves are described by a power function (as recommended by EN 13163) or a 50-fold extrapolation if the exponential equation proposed in the present paper is used. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 6, pp. 795–802, November–December, 2005.