MONTE CARLO STUDY ON THE CRITICAL ADSORPTION POINT OF BOND-FLUCTUATED POLYMER CHAINS TETHERED ON ADSORBING SURFACES

 The behavior of three-dimensional bond fluctuation model chains tethered on an adsorbing flat surface was simulated by the Monte Carlo method. The dependence of the number of surface contacts M on the interaction strength e and the chain length N was investigated by a finite-size scaling law M = N[a₀ + a₁N^1/v_k + O((N ^1/v_k)²)] for e near the critical adsorption point e_c, i.e., k ≡(e-e_c)/e_c closes to 0. The critical adsorption point was estimated to be e_c = 0.93, and the exponents  = 0.49 and 1/v= 0.57.     

REDUCTION OF C=C DOUBLE BOND WITH BOROHYDRIDE EXCHANGE RESIN-TRANSITION METAL COMPOUND SYSTEMS

Borohydride exchange resin-transition metal(Co,Ni,Cu,)compoundsystems reduced C=C double to C-C single bond in ethanol.     

酚醛型吸附树脂对水体系中吡啶和N,N-二甲基苯胺的吸附性能研究

研究了酚醛型吸附树脂在水体系中对吡啶和N，N-二甲基苯胺的静态和动态吸附行为．结果表明，在水中树脂对吡啶和N，N-二甲基苯胺的吸附主要以疏水吸附机理进行；吸附吡啶和N．N-二甲基苯胺的初始阶段，即达到38．3～48．9％平衡吸附时，吸附速率数据和半经验速率方程很吻合：酚醛型吸附树脂等温吸附吡啶和N，N-二甲基苯胺的平衡吸附数据符合Langmuir方程，相关系数在0．99以上，酚醛型吸附树脂吸附吡啶和N，N-二甲基苯胺属单分子层吸附：用80％的乙醇溶液作洗脱剂来洗脱吸附吡啶已达饱和的JDW-2树脂，效果是很理想的．在3．6个床体积内洗脱率达91．52％，4．8个床体积内洗脱率达到94．85％。表明酚醛型吸附树脂具有优良的洗脱性能．     

壳聚糖衍生物的制备及其吸附性能

壳聚糖衍生物的制备及其吸附性能曲荣君，马千里，郑秀丽，孙言志（烟台师范学院化学系烟台２６４０２５）关键词壳聚精衍生物，制备，吸附壳聚糖（ＣＴＳ）是重金瞩离子的吸附剂￣［１，２］，由于壳聚精分子中的－ＮＨ＿２在ｐＨ较低的水溶液易形成而使ＣＴＳ溶于水，造...     

Cl/Ag体系研究 Ⅱ.Cl吸附引起的表面结构变化

运用LEED,UPS和HREELS等表面技术研究了氯吸附至(c)阶段的Ag(111)表面结构.结果表明,表面上有三维的AgCl(111)生成,其生长按修正的Stranski-Krastanov模式进行.伴随着AgCI(111)生长的同时,表面上产生缺陷.这种缺陷只有在氯吸附至(c)阶段时表面上形成三维AgCI的过程中才能产生,它一旦在表面上形成后,表面上氯的存在与否对其不产生影响.本文提出了一个(c)阶段时的Cl/Ag(111)体系的结构模型.     

石英晶体微天平技术研究纳米TiO_2表面Cu(Ⅱ)吸附与光化学还原过程

环境中排放的重金属离子Cu!对水生和陆生生物有强的毒害性。饮用水中Cu!的浓度高于1.0mg·L-1时,将会导致人畜得血色沉着病和胃肠粘膜病[1]。Cu!无法进行生物降解,除去废水中Cu!的常见方法有离子交换、置换、化学沉淀等[2],然而这些方法需要消耗大量的化学试剂,成本高。近来,研     

磁性交联壳聚糖对稀土金属离子的吸附性能

用高胶乙酰度的壳聚糖包埋自制的磁流体，并用戊二醛交联制成磁性壳聚糖（MCG），考察了其对稀土离子La^3 ,Nd^3 ,Eu^3 ,Lu^3 的吸附性能。探讨了溶液的酸度，体系温度，初始离子浓度对MCG吸附性能的影响；发现MCG对稀土离子的吸经纯高脱乙酰度的壳聚糖强，最高吸附率可达到99％以上，并具有良好的重复使用性；其吸附行为满足Langmuir等温式。     

一种主链含非线性光学活性基团聚合物的合成

把非线性光学(NLO)发色基团引入到聚合物主链中,既可以增大聚合物中NLO基团的含量,从而提高聚合物的宏观NLO系数,又能够提高NLO聚合物的极化稳定性。本文报道一种由酚酞环氧树脂(PPh)与对硝基苯胺(NA)得到的NLO聚合物的合成及其极化松弛。 所用酚酞环氧树脂系自制,环氧值0.427。对硝基苯胺北京化工厂产,分析纯。N,N-二甲基甲酰胺为中国医药公司售品,化学纯,用前减压蒸馏精制,乙醇、丙酮均为北京化工厂生产,分析纯。在氮气保护下将等当量的PPh与NA溶于DMF中于150℃反应6～8小时后,倒     

Protein-coated β-ferric hydrous oxide particles: An electrokinetic and electrooptic study

Using microelectrophoresis and electric light scattering techniques, we investigated the adsorption characteristics, surface coverage and surface electric parameters of superstructures from two isoforms of plastocyanin, PCa and PCb, in an oxidized state adsorbed on β-ferric hydrous oxide particles. The surface electric charge and electric dipole moments of the composite particles and the thickness of the protein adsorption layer are determined in a wide pH range, at different ionic strengths and concentration ratios of PC to β-FeOOH. The adsorption of the two proteins was found to shift the particles’ isoelectric point and to alter the total electric charge and the electric dipole moments of the oxide particles to different extent. A “reversal” in the direction of the permanent dipole moment is observed at lower pH for PCb- than for PCa-coated oxide particles. Strict correlation is found between the changes in the electrokinetic charge of the composite particles and the variation in their “permanent” dipole moments. Data suggest that the adsorption of the proteins is driven by electrostatic and/or hydrophobic interactions with the oxide surfaces dependent on pH. The adsorption behaviour is consistent with the involvement of the “eastern” and “northern” patches of the plastocyanin molecules in their adsorption on the oxide surfaces that are differently charged depending on pH.