HIRFL-CSR前端总线控制器的改进设计

论述了用于兰州重离子加速器冷却存储环(HIRFL CSR)控制系统的前端总线系统控制器的改进。 改进了控制器的嵌入式操作系统和应用程序, 开发了控制器和数据库交换数据的应用程序。 该控制器基于BGA封装的ARM920T(ARM9)处理器和嵌入式的LINUX操作系统, 可以连接标准的VGA显示器、 键盘、 鼠标, 采用了现场可编程的FPGA器件进行背板接口设计, 并具有64 mA高驱动能力的总线驱动器, 以及拥有灵活的接口信号定义可编程能力, 是HIRFL CSR控制系统的关键部件。 The EVME bus controller which is a key component of the HIRFL CSR control system was improved . Besides reconfiguring the embedded Linux, a utility program was developed for data exchange between the controller and the database. The bus controller is based on ARM920T(ARM9) micro processor which is BGA packaged. The bus controller has the universal interface of VGA display, keyboard, and mouse. The backboard interface logic is programmed in an in system configurable FPGA device. The bus can drive high current up to 64 mA, with the flexibility of the programmable signal definitions. All the improved performance helped the EVME bus controller play a crucial role in HIRFL CSR control system.     

N9H9链状异构体的结构与稳定性的理论研究

采用密度泛函理论(DFT)B3LYP方法,在6-311＋＋G**基组水平上对N9H9可能存在的链状构型进行了几何优化,得到46种稳定链状异构体。应用自然键轨道理论NBO和分子中的原子理论AIM分析了这些化合物的成键特征和相对稳定性,G3MP2方法计算了各异构体的精确能量及在298K时的生成热ΔfHө(298K),并计算了由Peter Politzer等人所介绍的相对比冲量。研究结果表明：各异构体中N原子孤对电子与N＝N形成了p→π共轭作用是影响双键相邻的N－N键长变化的主要原因,并且对异构体的稳定性起着重要作用。所有异构体中N＝N位于链端的稳定性较差,其中B9最稳定, B6稳定性最差;C5是所有异构体中生成热最大的,也是相对比冲量最大的。     

Cross sections for (d–t) neutron interaction with germanium isotopes

The cross sections for (n,x)$(n,x)$ reactions with Ge isotopes were measured at (d–t) neutron energies around 14 MeV with the activation technique using metal discs of natural composition. Calculations of detector efficiency, incident neutron spectrum and correction factors were performed with the Monte Carlo technique (MCNP4C code). Cross sections data are presented for ⁷⁰Ge(n,2n$n,2n$)⁶⁹Ge, ⁷⁴Ge(n,α$n,\alpha$)^71mZn, ⁷⁶Ge(n,2n$n,2n$)^75(m + g)Ge, ⁷⁰Ge(n,p$n,p$)⁷⁰Ga and ⁷²Ge(n,2n$n,2n$)^71gGe reactions. The cross section results for ⁷²Ge(n,2n$n,2n$)^71gGe reaction were reported for the first time. Some other cross sections were obtained with higher precision, including the ⁷⁰Ge(n,p$n,p$)⁷⁰Ga reaction. Theoretical calculations of excitation functions were performed with the TALYS-1.0 code and compared with the experimental cross section values. Data were included in the EXFOR database.     

Site-specific ϕ- and ψ-torsion angle determination in a uniformly/extensively 13C- and 15N-labeled peptide

A solid-state rotational-echo double resonance (REDOR) NMR method was introduced to identify the ?- and ψ-torsion angle from a ¹H–¹⁵N or ¹H–¹³C′ spin system of alanine-like residues in a selectively, uniformly, or extensively ¹⁵N-/¹³C-labeled peptide. When a C_α(i) or a ¹⁵N peak is site-specifically obtainable in the NMR spectrum of a uniformly ¹⁵N/¹³C-labeled sample system, the ψ- or ?-torsion angle specified by the conformational structure of peptide geometry involving ¹⁵N(i)–¹H_αi–¹⁵N(i + 1) or ¹³C′(i − 1)–¹H^Ni–¹³C′(i) spin system can be identified based on ¹³C_α- or ¹⁵N-detected ¹H_α–¹⁵N or ¹H_N–¹³C REDOR experiment. This method will conveniently be utilized to identify major secondary motifs, such as α-helix, β-sheet, and β-turn, from a uniformly ¹⁵N-/¹³C-labled peptide sample system. When tested on a ¹³C-/¹⁵N-labeled model system of a three amino acid peptide Gly–[U–¹³C, ¹⁵N]Ala–[U–¹³C, ¹⁵N]Leu, the ψ-angle of alanine obtained experimentally, ψ = −40 ± 30°, agreed reasonably well with the X-ray determined angle, ψ = −39°.     

Analysis of CCD moiré pattern for micro-range measurements using the wavelet transform

A new approach based on the moiré theory and wavelet transform (WT) is proposed for measuring the micro-range distance between a charge-couple-device (CCD) camera and a two-dimensional reference grating. The micro-range distance is determined by measuring the pitch of the moiré pattern image, which is digitized by a CCD camera. A one-dimensional WT algorithm is applied to estimate the pitch of the moiré pattern. Experimental results prove that this technique is very efficient and highly accurate. The moiré range finder is an economic technique for measuring a micro-range distance.     

一种有机电致发光共聚物的制备和性能

采用Suzuki方法合成了9，9-二辛基芴与萘并硒二唑的两种无规共聚物并研究了其紫外光谱、光致发光和电致发光性能。两种聚合物的电致发光波长为650～666nm，均为发饱和红光的LED材料，其电致发光外量子效率最高达到了1．05％。随着共聚物中萘并硒二唑含量的增加，共聚物的光致发光和电致发光的发射波长均有少量红移。证明了根据共轭高聚物链内能量转移原理，在聚芴链中引入不同含量的窄带隙杂环单元可实现对聚芴发光颜色的调节。     

退火与极化温度对尼龙11薄膜驻极体内陷阱能级分布的影响

用热释电技术研究了尼龙11薄膜驻极体制备过程中热处理与极化温度对驻极体陷阱能级分布的影响.结果显示，淬火驻极体的热释电流谱上存在四个空间电荷退陷阱电流峰，而在退火处理后则显示两个退陷阱电流峰.采用多点法对热释电流谱进行理论拟合可以将各个退陷阱电流峰分离并得到它们的陷阱深度参数.这些参数进一步表明，淬火尼龙11薄膜驻极体内存在四个空间电荷的陷阱能级，极化温度升高对它们的分布情况影响不大；退火处理后，陷阱能级减少为两个，且随着极化温度的升高，较浅的陷阱能级有明显向较深陷阱能级接近的趋势. 关键词： 尼龙11 薄膜驻极体 热释电 热处理     

SrBi2Ta2O9/Bi4Ti3O12复合铁电薄膜的制备与特性研究

采用溶胶凝胶工艺在p-Si衬底上制备了SrBi₂Ta₂O₉/Bi₄Ti₃O₁₂复合铁电薄膜. 研究了SrBi₂Ta₂O₉/Bi₄Ti₃O₁₂复合薄膜的微观结构与生长行为、铁电性能和疲劳特性. 研究表明: Si衬底Bi₄Ti< 关键词： 2Ta₂O₉')" href="#">SrBi₂Ta₂O₉ 4Ti₃O₁₂')" href="#">Bi₄Ti₃O₁₂ 复合铁电薄膜 溶胶凝胶工艺     

LaMgAl11O19:Co2+被动调Q铒玻璃激光器研究

综述了被动调Q铒玻璃激光器的发展概况,推导了被动调Q铒玻璃激光器输出脉冲能量、脉宽的解析表达式,数值模拟了腔内损耗与输出脉冲能量、脉宽及峰值功率的关系以及输出脉冲能量与输入抽运能量的关系.设计了一台LaMgAl11O19:Co2 被动调Q铒玻璃激光器,实验验证了数值模拟分析结果.结果表明,腔内损耗增加将导致输出脉冲能量下降,脉宽变大,从而峰值功率降低.输入能量低于12 J时,输出只有单脉冲,当输入能量大于12 J时,输出会出现双脉冲.在8 J的电输入下,获得了峰值功率50 kW,2.7 mJ的1.535 tm激光输出.最后讨论了提高单脉冲能量的方法.     

一种新型温湿度测量系统的设计

为了解决传统温湿度测量系统存在的标定和校准过程复杂而引起的精度不高的问题,文中介绍了一种新型的温湿度测量系统。该系统由瑞士SENSIR ION公司新生产的SHT11数字式温湿度传感器和日本NEC公司生产的78F9177Y单片机为核心组成,具有电路简单、免标定、精度高和可靠性好等优点。