Direct and stepwise intercalation of alkylalcohols intoα-zirconium phosphate

Intercalation of alkylalcohols into -zirconium phosphate was investigated at 25°C and/or under reflux.n-Alcohols having two to five carbons and 2-propanol were taken up at 25°C. These alcohols, andn-hexanol and heptanol, also intercalated under reflux.n-Alcohols having eight to eighteen carbon atoms intercalated when a stepwise method was employed. 2-Butanol and tertiary amylalcohols intercalated under reflux using a butanol intercalate as a starting material. Ethanol-to-butanol intercalates were unstable at room temperature, losing alcohols and changing to -zirconium phosphate. The particle size of the -zirconium phosphate did not affect the intercalation of alcohols.     

原位氧化还原沉淀水热合成法制备LixMn2O4尖晶石

Li xMn2O4尖晶石是新一代的锂离子二次电池正极材料 [1], 其合成方法对材料的电化学性质影响很大[2].常规合成大多采用高温固相反应法, 此法具有反应温度高, 反应时间长, 容易产生缺陷和产物不纯净等缺点, 导致所合成的锂离子二次电池正极材料的性能较差. 目前用水热合成法制备电池正极材料Li xMn2O4尖晶石尚未见文献报道. 本文在常规水热合成法的基础上采用原位氧化还原沉淀水热合成法 [3]制备前驱物, 该法合成条件更温和, 而且使材料的综合性能得到了改善和提高.      

The effect of humidity on thermal process of zinc acetate

The thermal decomposition of zinc acetate dihydrate Zn(CH₃CO₂)₂·2H₂O in some humidity-controlled atmospheres has been successfully investigated by novel thermal analyses, which are sample-controlled thermogravimetry (SCTG), thermogravimety combined with evolved gas analysis using mass spectrometry (TG–MS) and simultaneous measurement of differential scanning calorimetry and X-ray diffractometry (XRD–DSC). The thermal processes of anhydrous zinc acetate in dry gas atmosphere by conventional linear heating experiment initiated with the sublimation around 180 °C, followed by the fusion and the decomposition over 250 °C. SCTG was useful to interpret clearly the successive reaction because the high-temperature parallel decompositions were effectively inhibited. The thermal behavior changed dramatically by introducing water vapor in the atmosphere and the thermal process was quite different from that in dry gas atmosphere. Zinc oxide (ZnO) was formed only in a humidity-controlled atmosphere, and could be easily synthesized at temperatures below 300 °C. XRD–DSC equipped with a humidity generator revealed directly the crystalline change from Zn(CH₃CO₂)₂ to ZnO. A detailed thermal process of Zn(CH₃CO₂)₂·2H₂O and the effect of water vapor are discussed.     

铟(Ⅲ)-向红菲啰啉络合物极谱吸附波的研究

在pH=3.8的磷酸柠檬酸盐缓冲体系中,铟(Ⅲ)-向红菲(口罗)啉络合物在单扫描示波极谱仪上于-0.67 V(vs.SCE)处产生一灵敏的吸附还原波,其二阶导数波灵敏度高,波形好.峰电位Ⅰ~O_P与钢(Ⅲ)浓度在 2.0X10~(-8)~2.0X10~(-6)mol/L范围内呈良好的线性关系,其检测限为8X10~(-9)mol/L铟(Ⅲ).该法用于试剂氧化锌和镀膜玻璃中铟(Ⅲ)的恻定,结果较好.     

Kinetic spectrophotometric methods for the determination of dothiepin hydrochloride in bulk and in drug formulation

Two simple and sensitive kinetic methods for the determination of dothiepin hydrochloride are described. The first method is based on kinetic investigation of the oxidation reaction of the drug with alkaline potassium permanganate at room temperature for a fixed time of 25 min. The absorbance of the colored manganate ions is measured at 610 nm. The second method is based on the reaction of dothiepin hydrochloride with 4-chloro-7-nitrobenzofurazan (NBD-Cl) in the presence of 0.1 mol L^–1 sodium bicarbonate. Spectrophotometric measurement was achieved by recording the absorbance at 470 nm for a fixed time of 60 min. All variables affecting the development of the color were investigated and the conditions were optimized. Plots of absorbance against concentration in both procedures were rectilinear over the ranges 4–24 and 50–250 g mL^–1, with mean recoveries 99.33±0.42 and 99.88±0.53, respectively. The proposed methods were successfully applied for the determination of dothiepin hydrochloride in bulk powder and in capsule dosage form. The results obtained were found to agree statistically with those given by the non-aqueous B.P. method. Furthermore the methods were validated according to USP guidelines and also assessed by applying the standard addition technique. The determination of dothiepin hydrochloride by the fixed concentration method is feasible with the calibration equations obtained, but the fixed time method proves to be more applicable.     

Quantitative weight of evidence method for combining predictions of quantitative structure-activity relationship models

ABSTRACT

A method for combining statistical-based QSAR predictions of two or more binary classification models is presented. It was assumed that all models were independent. This facilitated the combination of positive and negative predictions using a quantitative weight of evidence (qWoE) procedure based on Bayesian statistics and the additivity of the logarithms of the likelihood ratios. Previous studies combined more than one prediction but used arbitrary strengths for positive and negative predictions. In our approach, the combined models were validated by determining the sensitivity and specificity values, which are performance metrics that are a point of departure for obtaining values that measure the weight of evidence of positive and negative predictions. The developed method was experimentally applied in the prediction of Ames mutagenicity. The method achieved a similar accuracy to that of the experimental Ames test for this endpoint when the overall prediction was determined using a combination of the individual predictions of more than one model. Calculating the qWoE value would reduce the requirement for expert knowledge and decrease the subjectivity of the prediction. This method could be applied to other endpoints such as developmental toxicity and skin sensitisation with binary classification models.     

Possible conformations and relative stability of the 7-membered ring in 1α,5β,6,7α(H)-and 1β,5α,6,7α(H)-guai-11(13)-en-6,12-olides

Stereoisomers of 1,5,6,7(H)- and 1,5,6,7(H)-guai-11(13)-en-6,12-olides are calculated using molecular mechanics. The possibility of forming various conformations in the 7-membered ring is examined as a function of the fusion to the 5-membered C-ring. The effect of the methyl orientation on the conformation of the 7-membered ring and the relative stability of the conformers are discussed.Insitute of Phytochemistry, Karaganda, fax (3212)-43-37-73. Translated from Khimiya Prirodnykh Soedinenii, No. 1, pp. 54–56, January–February, 2000.     

微波辐射下无催化剂一锅法合成N-甲基十氢吖啶-1,8-二酮化合物

为了研究从简单易得的原料在无催化剂的条件下一锅法合成N-甲基十氢吖啶-1,8-二酮化合物，我们以各类醛（脂肪醛、芳香醛、二醛）、达咪酮或1,3-环己二酮和甲胺为原料，以乙二醇或水为溶剂，经微波辐射，一步反应得到了一系列N-甲基十氢吖啶-1,8-二酮化合物。反应时间从传统热反应的4-5小时缩短至2-10分钟，产率较高（56-95%），并且不需要使用催化剂。该反应后处理方便，只需要简单洗涤，环境友好，为合成此类化合物提供了一种简便、有效的合成方法。该方法不仅适用于一元脂肪醛、芳香醛，还适用于芳香二醛，因此可以合成含有一个或两个十氢吖啶结构单元的杂环化合物。     

Synthese und Geruch von Tricyclo[6.2.2.02, 7]dodecan-Derivaten

Summary The acetale-ketone9 was synthesized as precursor for the preparation of -santalol derivatives posessing a bicyclo[2.2.2]octane nucleus. After methylenation of the keto-group the subsequent acidic hydrolysis of the acetal leads via a Prins reaction of the liberated aldehyde with the methylene group to tricyclo[6.2.2.0^{2, 7}]dodecane derivatives. Their olfactory properties are described.

     

Synthesis and Antibacterial Activities of 4-Amino-3-(1-aryl-5-methyl-1,2,3-triazol-4-yl)-5-mercapto-1,2,4-triazoles/2-Amino-5-(1-aryl-5-methyl-1,2,3-triazol-4-yl)-1,3,4-thiadiazoles and Their Derivatives

ＩｎｔｒｏｄｕｃｔｉｏｎＳｃｈｉｆｆｂａｓｅｓ ,ａｍｉｄｅｓ ,ｉｍｉｄａｚｏｌｏ[2 ,1 ｂ] 1,3,4 ｔｈｉａｄｉａｚｏｌｅｓ,ａｎｄ 7Ｈ ｓ ｔｒｉａｚｏｌｏ[3,4 ｂ] 1,3,4 ｔｈｉａｄｉ ａｚｉｎｅｓｃｏｎｔａｉｎｉｎｇｈｅｔｅｒｏｃｙｃｌｅｓｈａｖｅｂｅｅｎａｔｔｒａｃｔｉｎｇｍｕｃｈａｔｔｅｎｔｉｏｎａｓｐｏｔｅｎｔｉａｌａｎｔｉｆｕｎｇａｌａｇｅｎｔｓ .1 51,2 ,3 ｔｒｉａ ｚｏｌｅ ,6 7ｍｅｒｃａｐｔｏ 1,2 ,4 ｔｒｉａｚｏｌｅ ,81,3,4 ｔｈｉａｄｉａｚｏｌｅ9 10ａｎｄｔｈｅｉｒｒｅｌａｔｅｄｃｏ…