[2+2]-Photocycloaddition von Cyclohexen an 2-Acetyl-5,5-dimethyl-1,3-cyclohexandion und 3-Acetyl-1,5,5-trimethyl-2,4-pyrrolidindion

Summary Irradiation of solutions of excess cyclohexene and 2-acetyl-5,5-dimethyl-1,3-cyclohexanedione (1), and 3-acetyl-1,5,5-trimethyl-2,4-pyrrolidinedione (4) results mainly in the formation of 1,5-diones2 and5. These originate from intermediate cycloadducts of cyclohexene and theexo-enols of the cyclic 1,3-diketones. The yields decrease with increasing polarity of the solvent. In solution2 and5 are in equilibrium with the cyclic hemiacetales3 and6.

     

氧氟沙星荷移络合物的荧光特性和应用

研究了电子受体氯冉酸(CL)和2,3 二氰5,6 二氯1,4 对苯醌(DDQ)与电子给体氧氟沙星之间的荷移反应。实验发现,氧氟沙星与以上两种电子受体在氯仿中可生成稳定的n π络合物,其荧光强度较之氧氟沙星分别增强了22和54倍。据此建立了两种基于荷移反应简便可靠地测定氧氟沙星的荧光光谱新方法。CL法和DDQ法测定氧氟沙星的质量浓度分别为0 06～2.4μg/mL和0 16～2.0μg/mL时,荧光强度与质量浓度呈良好的线性关系。该方法已用于药物制剂中氧氟沙星的测定,其回收率分别为98.4%～100.9%和98.5%～100.4%。     

N,C10-Überbrückte Morphinalkaloide, 5H-10,13-Iminoethano-phenanthro[4,5-bcd]furan, 2. Mitt.

Summary Following our concept of rather new structural variations in the nitrogen region of morphine alkaloids we describe the first synthesis of N/C-10-bridged tertiary bases.

     

Chemical analysis of acidic silicon etch solutions: I. Titrimetric determination of HNO3, HF, and H2SiF6

The chemical etching of silicon using HF-HNO₃ mixtures is a widely used process in the processing of silicon wafers for microelectronic or photovoltaic applications. The control of the etch bath composition is the necessary condition for an effective bath utilization, for the replenishment of the consumed acids, and to maintain a certain etch rate. The present paper describes two methods for the total analysis of the individual etch bath constituents HF, HNO₃, and H₂SiF₆. Both methods start with an aqueous acid-base titration determining the total acid concentration and the concentration of H₂SiF₆. The first method is an acid-base titration using a 0.1 mol L⁻¹ methanolic solution of cyclohexylamine (CHA) as non-aqueous titrant to determine the content of nitric acid. Then, the amount of hydrofluoric acid is calculated from the difference between the total acid and nitric acid content. The second method is based on the determination of the total fluoride concentration using a fluoride ion-selective electrode (F-ISE). The content of hydrofluoric acid is obtained from the difference between the total fluoride content and the amount of fluoride bound as H₂SiF₆. The amount of nitric acid results finally calculated as difference to the total acid content.     

三线性直接分解法分析高维灰色体系

对于由多个两维测量数据组成的三维阵，本文提出一种新三线性直接分解方法。采用高维ＰＣＡ分解，从三维阵中直接提取抽象光谱和抽象浓度，再结合ＱＺ算法，唯一地确定混合物中各组分光谱的浓度。该方法可以排除其它未知组分的干扰，适用于高维灰色体系定性定量分析和多点校准。用模拟数据讨论了光谱分离度对该方法的影响，应用于混合维生素Ｂ１、Ｂ２和Ｂ６的荧光分析，求得的光谱和浓度与实验值吻合很好。     

大环二萜类化合物的研究(Ⅳ)——Isosarcophytol—A前体化合物的合成

Isosarcophytol-A(1)是1982年首次从澳大利亚软珊瑚(Nephthea brassica)中分离鉴定的西松烷型(Cembrane)大环二萜类化合物,其结构为6,10,14-三甲基-3-异丙基-3E,5E,9E,13E-环十四碳四烯-1-醇,是Sarcophytol—A(2)的异构体,但有关1的生物活性试验和全合成研究尚未见报道.我们在前文报道了以低价钛诱导的分子内二羰基偶联为环化方法,完成了天然大环二萜类化合物Cembrene—C的全合成和Sarcophytol—A(2)苄醚衍生物(3)的合成.本文报道以天然法呢醇4为起始原料,经区域选择性氧化、羟醛缩合等六步反应,合成了1的前体化合物11.合成路线如下:     

聚2,6-二甲基苯醚树脂分子量分布及其与冲击强度关系的研究

本工作建立了室温下用凝胶色谱法(GPC)测定聚2,6-二甲基苯醚(PPO)树脂分子量、分子量分布的方法。淋洗剂不采用文献申报道的毒性较大者,也不在较高柱温下进行,而采用甲苯(或氯仿)在室温下测定。对样品在甲苯中溶解温度、浓度和稳定性等都进行了系统研究,找到了最优化条件。GPC数据结合改性PPO(MPPO)产品性能测定结果,经仔细分析找到了影响MPPO产品质量的一个重要因素是PPO树脂中低分子量部分含量。它与产品冲击强度有明显的依赖关系。提出了一个从CPC谱图确定低分子量部分含量的方法。     

Improvement of Dispersion and Release Properties of Nifedipine in Suppositories by Complexation with 2-Hydroxypropyl-β-cyclodextrin

Geometries, electronic properties and NMR-shielding of cucurbit[5]uril, decamethylcucurbit[5]uril, cucurbit[6]uril, cucurbit[7]uril, and cucurbit[8]uril are investigated with DFT calculations. All molecules are highly symmetrical with a distinct geometric flexibility. In addition with a characteristic partial charge distribution these findings account for their chemical complex building ability.     

电子俘获材料Zn_4B_6O_(13)∶Dy~(3+)的热释光特性研究

通过高温固相扩散反应合成了稀土元素镝掺杂的 Zn4 - x B6 O1 3∶ x Dy3+ 磷光体 .测定了该化合物在高能6 0 Co伽玛射线辐照下的热释发光曲线和三维热释光谱 .三维热释光谱表明 ,位于大约 480 nm和 5 80 nm的发光谱带来自于 Dy3+ 离子的 f-f 跃迁 .基质中掺杂的 Dy3+ 离子浓度的变化能够改变陷阱的相对分布 ,随着Dy3+浓度的增加 ,发光峰温向高温方向移动 ,这可提高剂量器的热稳定性 .当辐照剂量增加时 ,发光峰温亦向高温方向移动 ,即陷阱加深 .确定了 Zn3.86 B6 O1 3∶ 0 .1 6Dy3+样品主峰的陷阱深度 E=0 .73 e V,频率因子S=2 .43× 1 0 9s- 1 .在 1～ 1 0 0 Gy治疗级范围内 ,Zn3.86 B6 O1 3∶ 0 .1 6Dy3+ 对 6 0 Co伽玛射线辐照的热释光剂量响应呈良好的线性关系 .实验结果表明 ,Zn3.86 B6 O1 3∶ 0 .1 6Dy3+是一个潜在的应用于临床医疗的伽玛射线电离辐射热释光剂量计材料 .