Molecular structure of (diethyldithiocarbomoyl)diphenylthiophosphinate

X-Ray study of (diethyldithiocarbomoyl)diphenylthiophosphinate was carried out. AZ-conformation of the diethyldithiocarbomoyl ligand, which results in a short nonvalent intramolecular P...S contact (3.315 Å), is realized in the molecule. Steric hindrances in the molecule increase the P-S-C bond angle to 106.39°.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1978–1980, October, 1995.The work was financially supported by the International Science Foundation (Gram RH1 000).     

二碘化钐促进的硒代酯的合成

用SmI2/THF/HMPA体系在室温下使二芳基二硒醚中的Se-Se键还原断裂成硒负离子物种, 继而与酸酐作用得到硒代酯, 该反应条件温和中性, 产率良好, 提供了合成硒代酯的一个新途径。     

固相配位化学反应研究 L ⅩⅩⅢ.等温电导法研究醋酸锰和草酸的室温固相化学反应

本文利用等温电导法考察了醋酸锰和草酸的室温固相配位化学反应的制样方法对实验结果的影响，并获得了该反应的动力学参量。     

氨基苯磺酸和氨基萘磺酸在反相离子对色谱和离子色谱中分离行为的比较

本文考察了氨基苯磺酸和氨基萘磺酸染料中间体在反相离子对色谱和离子色谱中的分离行为，结果表明一些异构体在反相色谱中的保留顺序与离子色谱中的顺序发生颠倒。静电作用力在离子色谱中对保留值的贡献比在反相离子对色谱中对保留值的贡献要大，而疏水作用力在反相离子对色谱中对保留值的贡献却较在离子色谱中对保留值的贡献要大。离子对色谱更有利于有机离子的分离分析。     

5－（4－乙酰氧基苯基），10，15，20－三苯基卟啉金属配合物修饰的铂支撑双层脂膜的IV性质

合成并表征了５－（４－乙酰氧基苯基），１０，１５，２０－三苯基卟啉及其金属配合物，将它们作为修饰物，制得铂支撑的双层脂膜，用循环伏安法研究了抗坏血酸的氧化还原反应，并对其机理作了探讨。     

活性炭负载磷钨酸催化合成季戊四醇缩酮(醛)

季戊四醇双缩酮(醛)可作为杀虫剂[1]、塑料的抗氧化剂及表面活性剂的消泡剂等[2,3];其单缩酮(醛)是有机合成的重要中间体。其合成反应常用无机酸催化剂(如H2SO4、HCl、H3PO4等)[4],副反应多、腐蚀性强和易污染。近年来,采用脱铝超稳Y沸石和对甲苯磺酸等作催化剂[5-7],效果良好。本文以活性炭负载磷钨酸作催化剂合成了12种季戊四醇缩酮(醛),催化剂用量少、反应速率快、产率高,催化剂可回收使用。其结构经元素分析、IR及1HNMR等表征。1　实验部分1 1　仪器与试剂Kofler熔点仪,温度计未经校正;美国NICO LETAVATAR 360FT光谱仪…     

钇与2-(4′-氯-2′-膦酰基一苯偶氮)-7-(2′,6′-二溴-4′-氯-一苯偶氮)-1,8-二羟基-3,6-萘二磺酸配位反应动力学研究和机理探讨

用停流分光光度法获得反应的经验速率方程为R=k[y(H_2O~n)~(3+)]·[H_6R]·[H~+]~(-1)。参考Eigen-Tamm机理和测得的动力学参数,拟出了反应的可能机理。     

石墨炉原子吸收法测定钒的研究

本文比较了在标准石墨管,热解涂层和全热解石墨管中钒的吸收信号形状。用全热解石墨管和EDTA铵盐作基体改进剂,直接测定水系沉积物中痕量钒。方法的特征量为61pg/0.0044A。     

羟基化合物及其葡醛酸苷化学结构与RP—HPLC保留行为相关性研究

采用体外孵育生物合成方法获得羟基化合物葡醛酸苷系列化合物，并对其反相高效液相色谱保留行为及底物与其葡醛酸结合物保留行为相关性进行了研究，建立了相应的结构－色谱保留行为相关性方程及葡醛酸苷类代谢物保留行为的预测方法。将ＱＳＲＲ研究扩展到药物代谢物领域，对药物Ⅱ相葡醛酸化代谢产物的ＨＰＬＣ分析提供了帮助。     

Effect of Pluronic F127 on the pore structure of macrocellular biodegradable polylactide foams

Thermally induced phase separation technique was utilized to fabricate biodegradable poly(l ‐lactic acid) (PLLA) macrocellular foams which were capable of being applied in tissue engineering. The block copolymer Pluronic F127 composed of (polyethyleneoxide)‐(polypropyleneoxide)‐(polyethyleneoxide) [(PEO)‐(PPO)‐(PEO)] was used as a porogen. Water/dioxane mixtures with different volume ratios were used as solvents. The addition of Pluronic F127 could induce an appearance of large pores (50–200 μm) besides small pores (10–20 μm) or a change from a solid–liquid phase separation to a liquid–liquid phase separation. The role of Pluronic F127 depends on the water/dioxane ratios in the PLLA/dioxane/water system. The X‐ray diffraction patterns and porosity measurement results showed that Pluronic F127 was crystallized and existed on the pore wall. The effect of Pluronic F127 on changing pore structure is attributed to the occurrence of the interaction of the lipophilic PPO blocks in Pluronic F127 with PLLA clews, consequently, this results in PLLA aggregation and early phase separation on cooling. Copyright © 2004 John Wiley & Sons, Ltd.