二极管泵浦1064nm单频Nd:YVO4激光器的研究

报道了一种用国产激光二极管泵浦的1064nm单频NdYVO4红外激光器的设计.利用布氏片和石英晶体组合构成的双折射滤光片技术,在泵浦功率为800mW时,实现了功率为360mW的1064nm红外单频输出.测量结果表明,偏振比超过了10001,功率稳定性优于0.5%,振幅噪声小于0.1%.     

高应变率下U-Nb合金的断裂组织特征

利用内部爆炸加载方法对U-Nb合金进行爆破试验，对爆破试验产生的破片进行回收，并对U-Nb合金破片进行一些微观检测分析，从而初步研究在爆炸加载下U-Nb合金的微观断裂机制。     

Nd~(3+):YAG激光的光纤传输

首先叙述了光纤传输Nd~(3+): YAG激光的优点,接着分析了不同光纤和其传输Nd~(3+): YAG激光的特点。然后通过对光纤传输系统各部分的分析与设计,结合实际,设计了光纤耦合机构。最后,对来自于工件反射光问题提出了解决方案。     

Spectra Analysis of a Novel Ti-Doped LiAlO2 Single Crystal

LiAlO2 single crvstals doped with Ti at concentration 0.2at.% are grown by the Czochralskl technique with dimensions φ42×55mm. Ti ions in the crystal are quadrivalence proven by comparing the absorption and fluorescence spectra of pure LiAlO2 and Ti： LiAlO2. After air and Li-rich atmosphere annealing, the absorption peaks in the range of 600-800nm disappear. We conclude that 682 and 756nm absorption peaks are attributed to the VLi and Vo absorptions, respectively： The peaks at 716nm and 798nm may stem from the VLi^＋ and absorptions. The colour-centre model can be applied to explain the experimental phenomena. Ti^4＋-doping produces more lithium vacancies in the LiAlO2 crystal. The intensities of [LiO4] and the associated bonds remain unchanged, which improves the anti-hydrolyzation and thermal stability of LiAlO2 crystals.     

微模塑法制备PMMA/SiO2二氧化硅杂化材料微结构

以摩尔比为 1∶1的甲基丙烯酸甲酯 (MMA)、甲基丙烯酸 (3 三乙氧基硅烷基 )丙酯 (ESMA)单体、0 .2 %(单体总量的质量分数 )的偶氮二异丁腈AIBN引发剂和四氢呋喃 (THF)溶剂 ,及 2 0 % (总质量分数 )的正硅酸乙酯TEOS合成出PMMA/SiO2 有机 无机杂化的杂化溶胶 .将溶胶在洗净的普通光学玻璃基片表面甩膜 .利用软刻蚀中的微模塑法 ,把有机硅弹性印章复制有精细图纹一面轻放在杂化溶胶膜上进行微模塑 ,外加 1N压力于12 0℃下处理 2h使溶胶凝胶化 .印章剥离后在基片表面就形成了PMMA/SiO2 有机 无机杂化材料的微图纹结构 .从微图纹的光学显微镜照片可以看出微模塑方法制备杂化材料复制的图纹精细度高 ,操作简单易行 ,是一类比较理想的微细图纹结构加工的方法 .     

Spin-Polarized Tunnelling Magnetoresistance Effects in La0.833K0.167MnO3／SrTiO3 Polycrystalline Perovskite Manganites

A sample of La0.833K0.167MnO3-SrTiO3 (LKMO/STO) is fabricated by the sol-gel method. The microstructure,magnetic and transportation properties have been studied. X-ray diffraction patterns indicate that the structure of LKMO/STO is a homogeneous solid solution phase. The resistivity of LKMO/STO shows the insulator behaviour, which is different from La0.833K0.167MnO3 (LKMO) whose resistivity shows metal-insulator transition with decreasing temperature. The low-field (moH = 0.02 T) magnetoresistance decreases from 11% to 0.2% with the increasing temperature from 4 K‘to 220K for the LKMO/STO sample. The magnitude of magnetoresistance in a strong field (μoH = 5.5 T) almost increases linearly with decreasing temperature and reaches the maximum of 65% at the low temperature of 4.2K, which is much higher than that oE LKMO (40%). The enhanced low-field magnetoresistance effects are quantitatively explained by the spin-polarized tunnelling at grain boundaries.     

Magnetic and Crystalline Microstructures of Fe-Pt-B Nanocomposite Ribbons

We investigate magnetic and crystalline microstructures of melt-spun (Fe0.675Pt0.325)100-xBx (x=12, 14, 16, 18,20) nanocomposite ribbons after optimal thermal treatment using a magnetic force microscope. The magnetic microstructures are characterized by darker spots adjacent to brighter ones in a sub-micro scale and in random distribution. It is found that the strength of the exchange coupling interaction between the crystals in the 10-100 nm scale, implied by the maximum value (δM)max of the Henkel plot, could be roughly described by the ratio of the average width of the magnetic spots w^- to the average crystal size D^- for the ribbons. Moreover, we find that the intrinsic coercivity jHc of the ribbons is sensitive to their crystal sizes, and the smaller D^-, the higher jHc. Finally, by using roughness analysis, the curve of the root mean square values (δФ)rms of the phase shift of the magnetic force images versus the boron content x is obtained, which is qualitatively consistent with that of the magnetization σ12 kOe of the ribbons versus x.     

Theoretical Study on the Rotational Bands and Shape Coexistence of^179，181，183Au in the Particle-Triaxial-Rotor Model

We perform a series of theoretical calculations and investigation for nuclei 179，181，183Au in the particle-triaxialrotor model with variable moment of inertia. The calculated energy spectra in^179,181,183Au agree well with the experimental data globally. The obtained results indicate that the nuclei^179,181,183Au have prolate deformation and involve shape coexistence with different deformation parameters in different bands. The main configuration of bands 1, 2, 3 and 5 in these nuclei are identified as [541]1/2^- (πh9/2, α = 1/2), [541]1/2- (πh9/2, α= -1/2),[530] 1/2- (πf7/2) and [660] 1/2^ (πi13/2), respectively.