Crystal Structure of Adduct 2-Phenyl-imidazo [ 4,5-f ] 1,10-phenanthroline Methanol

The structure of the title adduct comprises a phenanthroline derivative 2-phenyl-imidazo[4,5-f]1,10-phenanthroline and a methanol.The composition of the crystalline adduct was characterized as C19H12N4.CH3OH.It belongs to orthorhombic system,space group Pna21 with a=1.3693(4)nm,b=2.2988(7)nm,c=0.51338(15)nm,V=1.6160(8)nm^3.Z=4,and final R1=0.0423.wR2=0.1012 .Crystal structure shows that all the 19 carbon atoms and 4 nitrogen atoms are coplanar.The bond length data indicated that a very extensive conjugation system was formed.This conjugation makes the compound being a potentially excellent energy transformer used for luminescent materials.     

Microwave‐improved polymerization of ϵ‐caprolactone initiated by carboxylic acids

The ring‐opening polymerization of ε‐caprolactone (ε‐CL), initiated by carboxylic acids such as benzoic acid and chlorinated acetic acids under microwave irradiation, was investigated; with this method, no metal catalyst was necessary. The product was characterized as poly(ε‐caprolactone) (PCL) by ¹H NMR spectroscopy, Fourier transform infrared spectroscopy, ultraviolet spectroscopy, and gel permeation chromatography. The polymerization was significantly improved under microwave irradiation. The weight‐average molecular weight (M_w) of PCL reached 44,800 g/mol, with a polydispersity index [weight‐average molecular weight/number‐average molecular weight (M_w/M_n)] of 1.6, when a mixture of ε‐CL and benzoic acid (25/1 molar ratio) was irradiated at 680 W for 240 min, whereas PCL with M_w = 12,100 and M_w/M_n = 4.2 was obtained from the same mixture by a conventional heating method at 210 °C for 240 min. A degradation of the resultant PCL was observed during microwave polymerization with chlorinated acetic acids as initiators, and this induced a decrease in M_w of PCL. However, the degradation was hindered by benzoic acid at low concentrations. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 13–21, 2003     

停流—荧光动力学分析法测定痕量钛的研究

利用自行组装的停流-荧光动力学分析仪,采用停流法汇合流体动力注入技术,研究了钛与3.5-二溴水杨基荧光酮的荧光增强动力学反应性质,讨论了流速、进样时间对方法灵敏度和精密度的影响,提出了一个快速、简便、精确测定钛的分析方法,并用于稀土样品及合成样品中痕量钛的测定.方法检测限为8×10~(-3)ppm,大多数元素的干扰均可用动力学方法消除.     

具有高机械强度的掺Er~(3 )∶TeO_2-Nb_2O_5玻璃的光谱性质研究

熔制了掺铒碲铌玻璃样品(100-X)TeO2-XNb2O5(X=5,10,15,20mol%),测试了其密度、折射率、转变温度、析晶温度、维氏机械强度、吸收光谱、荧光光谱、荧光寿命等参量。利用Judd-Ofelt和McCumber理论分别计算了铒离子强度参量Ωt(t=2,4,6)和受激发射截面σemi的大小,研究了掺铒碲铌玻璃样品光谱参量对Nb2O5成分的依赖性,并与典型的碲锌钠玻璃(75TeO2-20ZnO-5Na2O)在热学、机械强度、光谱性质和放大品行四个方面进行了比较.     

枸橼酸莫沙必利的合成

分别以邻羟基对氨基苯甲醇钠，对氟苯甲醛，邻苯二甲酰亚胺为起始原料，制得3个中间体，用其中2个中间体经偶合，环化后与第3个中间体反应，再经成盐制得产品，其摩尔总收率为31．5％。     

A comparison theorem for a piecewise Lipschitz continuous Hamiltonian and application to Shape-from-Shading problems

Summary The reconstruction from a shaded image of a Lambertian and not self-shadowing surface illuminated by a single distant pointwise light source may be written as a first-order Hamilton-Jacobi equation.In this paper, we continue the investigation begun in E. Rouy and A. Tourin into the uniqueness of the solution of this equation; the approach is based on the viscosity solutions theory and the dynamic programming principle.More precisely, we concentrate here on the uniqueness of the viscosity solution of this equation in case the measured luminous intensity reflected by the surface is discontinuous along a smooth curve. We prove a general comparison result for a piecewise Lipschitz continuous Hamiltonian and illustrate it by numerical experiments.     

The influence of hard‐segments on two‐phase structure and shape memory properties of PCL‐based segmented polyurethanes

Poly(ε‐caprolactone)‐based segmented polyurethanes (PCLUs) were prepared from poly(ε‐caprolactone) diol, diisocyanates (DI), and 1,4‐butanediol. The DIs used were 4,4′‐diphenylmethane diisocyanate (MDI), 2,4‐toluenediisocyanate (TDI), isophorone diisocyanate (IPDI), and hexamethylene diisocyanate (HDI). Differential scanning calorimetry, small‐angle X‐ray scattering, and dynamic mechanical analysis were employed to characterize the two‐phase structures of all PCLUs. It was found that HDI‐ and MDI‐based PCLUs had higher degree of microphase separation than did IPDI‐ and TDI‐based PCLUs, which was primarily due to the crystallization of HDI‐ and MDI‐based hard‐segments. As a result, the HDI‐based PCLU exhibited the highest recovery force up to 6 MPa and slowest stress relaxation with increasing temperature. Besides, it was found that the partial damage in hard‐segment domains during the sample deformation was responsible for the incomplete shape‐recovery of PCLUs after the first deformation, but the damage did not develop during the subsequent deformation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 557–570, 2007     

Liquid Chromatography-Mass Spectrometry Determination of Six 5-Nitroimidazoles in Animal Feedstuff

A liquid chromatography-mass spectrometry method for the determination of the coccidiostats metronidazole, ronidazole, dimetridazole, secnidazole, tinidazole and ipronidazole in feedstuff was developed. The 5-nitroimidazoles were extracted from animal feed with a pH 2 phosphate buffer solution followed by a solid phase extraction procedure based on HLB cartridges. The liquid chromatographic separation of the extracts was performed on a C₁₈ bonded silica column applying a gradient of elution with pH 4.3 ammonium acetate buffer solution and acetonitrile. Quantification for each 5-nitroimidazole was carried out monitoring its molecular ion [M + H]⁺ obtained by positive electrospray ionisation mode. A pool of feedstuffs was used to optimise and validate the method. Linearity, quantification limit, intra-day and inter-day reproducibility and accuracy were estimated using this pool of feedstuffs spiked with the drugs. For the confirmatory assay, several fragment ions from each 5-nitroimidazole were obtained and monitored. The method was applied successfully to determine 5-nitroimidazoles in feedstuff at level of 0.05 mg kg⁻¹.     

Synthesis of Methyl 2-(5-Arylidene-2,4-dioxotetrahydrothiazol-3-yl)propionates

A series of methyl 2-(arylidene-2,4-dioxotetrahydrothiazol-3-yl)propionates were prepared. A study of the 3D structure was performed. The log P values are given for all the synthesized compounds.     

Crystallographic report: Crystal structure of tetra(4‐methyl‐5‐imidazole‐carboxyaldehyde)zinc(II) diperchlorate

The central zinc(II) atom in the title complex is tetrahedrally coordinated by four nitrogen atoms derived from 4‐methyl‐5‐imidazolecarboxyaldehyde ligands with Zn? N in the range 2.007(3) to 2.026(4) Å. Copyright © 2003 John Wiley & Sons, Ltd.