化学位移估算研究ATP构象随溶液pH值的变化

利用Johnson和Bovey的理论和方法计算了不同扭曲角χ(O4′－C1′－N9－C4)的ATP(5′-三磷酸腺苷)分子中糖环质子H1′和H2′由于环流效应引起的化学位移.H1′的化学位移与扭曲角χ有较强的依赖关系,反映了ATP在溶液中细微的构象变化.将计算结果与实验结果比较,证明在本文讨论的pH值范围(1～10)内,Mg2＋加入后,ATP的扭曲角χ在230～360°范围内变化.随溶液的pH值减小,ATP分子的构象由trans 构象通过-gauche构象转变为cis构象. 从而证明在酸性条件下, ATP倾向于以cis构象存在,而在碱性条件下trans构象更为稳定,从另一方面支持了在酸性条件下N1参与配位而在碱性条件下N7参与配位的结论.在讨论中也考虑了由pH变化所引起的环流强度的变化.     

Development of a competitive ELISA for the quantification of F5 conjugate in HER2-targeted STEALTH immunoliposome doxorubicin in plasma samples

HER2 (human epidermal growth factor receptor 2, erbB2, or neu) is overexpressed by a large number of tumor types and has been identified as an important target for cancer therapy. F5 is a single-chain human antibody fragment that recognizes HER2 receptor and is covalently conjugated to PEGylated lipid to form F5 conjugate (F5CG) in the product HER2 targeted STEALTH immunoliposome doxorubicin. Here we described the method development of a competitive enzyme-linked immunosorbent assay (ELISA) for the determination of total concentration of F5 conjugate in plasma samples. The method involved the biotinylation of F5CG, detergent treatment of plasma sample to solubilize F5CG into monomeric form, and competitive ELISA for solubilized F5CG competitively binding to anti-F5CG antibody with biotinylated F5CG for the determination of total F5CG in plasma. The detection range of this method was from 0.2 ng/mL to 125 ng/mL for F5CG in plasma. The lower limit of quantification (LLOQ) was 0.2 ng/mL. This method was established and used for the measurement of F5CG concentration to provide information about F5CG circulation after the administration of immunoliposome in preclinical studies.      

Synthesis, complex-formation, and extracting ability of new derivatives of dithia-13(16)-crown-4(5) ethers

Various methods of synthesizing functional derivatives of dithia-13(16)-crown-4(5) ethers are proposed. Complex-formation of the obtained compounds with Ag⁺ and Pb²⁺ ions has been studied using ¹H NMR. A radiometric method was used to investigate the extracting ability of substituted dithia-13(16)-crown-4(5) ethers in relation to Ag⁺ and Cd²⁺ ions from aqueous solution in the presence of anions of various degree of hardness, with determination of the metal content. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 233–243, February, 2006.     

Improvement of basic performances of a nickel-metal hydride battery

To develop a sealed-type nickel-metal hydride battery for use in portable equipment or in electric vehicles, investigations were conducted on negative electrodes using AB₅-type hydrogen storage alloy and positive electrodes. For the cycle life performance of the battery, alkaline treatment of the alloy and the substitution of more than 50% to the alloy with Co were effective. For the positive electrode, zinc as a solid solution in the nickel positive electrode obviously prevented γ-NiOOH from being formed in the charging process of β-Ni(OH)₂ and suppressed the migration of the electrolyte solution in the separator to the active material of the positive electrode. Also, hydrophobic treatment of the surface of the alloy was effective to prevent the elevation of the battery internal pressure of the battery in high rate charge.     

5-苄基-4-叔丁基-2-芳氨基噻唑氢溴酸盐的合成、表征及抗肿瘤活性

以芳香胺和4,4-二甲基-1-芳基-2-溴戊-3-酮为原料, 设计合成了29种新的5-苄基-4-叔丁基-2-芳氨基噻唑氢溴酸盐化合物; 其结构经¹H NMR和元素分析等确证. 体外抗肿瘤活性测试结果表明, 化合物A4, A5, A12和A29对人非小细胞肺癌细胞A549的IC₅₀值分别为0.016, 0.019, 0.019和0.026 μmol/mL, 与阳性对照物紫杉醇(IC₅₀值为0.022 μmol/mL)相当; 化合物A5, A7, A13, A14和A19对肝癌细胞Bel7402的IC₅₀值分别为0.021, 0.021, 0.026, 0.014和0.029 μmol/mL, 与阳性对照物紫杉醇的IC₅₀值(0.030 μmol/mL)相近. 利用倒置显微镜和Hoechst33342-PI双染色法观察了细胞经化合物处理后的形态变化.     

Two Pillared-layer Co(Ⅱ) Metalorganic Frameworks Displaying Pore Modulation by Rodlike Ligands

Two novel compounds, {[Co2(epda)2(4,4-bpy)(H2O)2]·3H2O}n1 and {[Co2(epda)2(bpe)(H2O)2]3H2O}n2(H2epda=5-ethyl-pyridine-2,3-dicarboxylic acid, 4,4’-bpy=4,4’-bipyridine and bpe=1,2-di(4-pyridyl)ethylene) were solvothermally synthesized and characterized by elemental analysis, IR spectroscopy, therm ogravimetric analysis (TGA), and singlecrystal X-ray diffraction. Complex 1 is of monoclinic system, space group P21/c with a=13.344(5), b=14.724(5), c=8.267(3), β=105.840(4)°, V=1562.5(10)3, Dc=1.480 g/cm3, Mr=375.19, Z=4, F(000)=712, μ=1.121 mm-1, the final R=0.0512 and wR=0.1260 for 2890 observed reflections with I>2σ(I). 2 belongs to the monoclinic system, space group P21/c with a=14.224(4), b=14.726(4), c=8.287(2), β=99.696(4)°, V=1711.1(9)3 , Dc=1.402g/cm3, Mr=388.21, Z=4, F(000)=740, μ=1.027 mm-1 , the final R=0.0354 and wR=0.0862 for 12237 observed reflections with I>2σ(I). Both complexes present intimately related structures featuring infinite Co-carboxylate layers of [CoⅡ(epda)(H2O)]n pillared by 4,4’-bpy (or bpe) molecule to produce the microporous frameworks, unambiguously indicating that pore dimensions of the framework are regulated by the N,N’-donor pillars.     

CuSAPO-5分子筛的合成、表征及对甲苯吸附性能

采用水热合成法,以三乙烯四胺（TETA）为模板剂,合成CuSAPO-5分子筛。通过扫描电子显微镜（SEM）、粉末X射线衍射（XRD）、傅里叶变换红外光谱（FT-IR）、热重（TG）、N₂吸附及元素分析等手段对分子筛样品进行表征,考察了不同硅铝比对合成分子筛晶体的影响,并测定了分子筛样品对甲苯的吸附性能。结果表明,将合成液的pH值调节为4.8～5.0,于150～170℃晶化1 d,可合成晶体形貌为球体的CuSAPO-5分子筛,粒径约为30 μm。分子筛样品具有较好的热稳定性,仍保持了SAPO-5分子筛的AFI骨架结构,属于微孔分子筛,孔径约为0.70nm,比表面积约为265 m²·g^-1。元素分析结果表明分子筛中P、Si、Al和Cu的含量分别为12.56%、4.48%、7.17%和6.25%。样品对甲苯的吸附约在120 min时达到饱和,吸附量约为180 mg·g^-1。     

Er3+/Yb3+共掺杂La2TiO5荧光粉体的制备及上下转换荧光性质研究

使用溶胶-凝胶法制备了Er³⁺单掺及Er³⁺/Yb³⁺共掺La₂TiO₅荧光粉体样品。经过1 100 ℃下3 h的煅烧,得到了较好的微晶。X射线粉末衍射测试表明样品中不含杂质相。扫描电镜观察表明样品颗粒范围为100~300 nm。紫外激发光谱中,在250~320 nm范围内出现Er离子和临近配位氧离子之间强烈的电荷转移跃迁峰,在350~500 nm出现Er离子f-f跃迁尖锐的吸收峰。在378 nm激发下,Er离子发射强烈的特征绿光(546 nm, ⁴S_3/2-⁴I_5/2),当Er离子物质的量分数达到1%,发射峰强度达到最大。在980 nm激发下的上转换光谱中,Yb离子的共掺杂有效的敏化上转换发光强度。详细讨论了样品的上下转换发光机理及相应能量传递过程。同时测试了样品的荧光衰减和量子产率。     

晶种导向下干胶法合成ZSM-5分子筛

以廉价水玻璃为硅源,在晶种替代有机模板剂的条件下采用干胶法合成了ZSM-5分子筛。利用XRD、SEM、TEM、FTIR、N₂吸附-脱附和NH₃-TPD等分析方法对合成样品进行了表征和测试,考察了合成条件对ZSM-5分子筛晶化过程的影响。结果表明,在硅铝比（n/n）为30~70,钠硅比（n/n）为0.12~0.20时都可以得到结晶度良好的ZSM-5分子筛。研究发现,干胶法合成ZSM-5,在不引入外加水的情况下也可以得到ZSM-5样品,外加水的引入能够有效地提高晶化速率;与水热法合成ZSM-5分子筛相比,干胶法可以显著地缩短晶化时间,同时,合成样品的晶体尺寸也有所减小。     

基于一种柔性和角型有机芳香多酸配体的两种3D配位聚合物的合成、结构和荧光性

通过水热合成的方法制得具有三维超分子结构的2种配位聚合物{[Zn（L）（bpa）_0.5（H₂O）₂]·2.25H₂O}_n（1）和{[Cd（L）（H₂O）]·2H₂O}_n（2）,其中,H₃LCl为氯化5-（4-羟基吡啶基甲基）间苯二甲酸,bpa为1,2-二（4-吡啶基）乙烷。这2种化合物的结构通过单晶X射线衍射、红外光谱（IR）、元素分析、热重分析（TG）等方法进行了表征。结构解析表明：化合物1是一种梯型链式结构,并通过链间氢键作用延伸成了3D超分子网络;化合物2为含有大量一维隧道空腔的2D配位网络。此外,研究了这2种化合物的荧光性质。