Synthesis and characterization of insulin-5-Fu conjugate,enabling insulin as multi-drug carrier via dendritic approach

To enable insulin as multi-drug carrier, we designed and synthesized dendritic linker molecule bearing three 5-Fluorouracil residues at the branch ends. The new conjugate showed excellent water solubility. The stabilities under different conditions were investigated. The results showed that the conjugate was a potential prodrug to release free 5-Fu.     

Topochemical models for anti-HIV activity of 1-alkoxy-5-alkyl-6-(arylthio)uracils

Relationship between topochemical indices and anti-HIV-1 (HTLV-III) inhibitory activity of 1-alkoxy-5-alkyl-6-(arylthio)uracils has been studied. Superadjacency, an adjacency-cum-distance-based, topochemical index and Wiener’s, a distance-based, topochemical index were calculated for a set of 36 1-alkoxy-5-alkyl-6-(arylthio)uracils. Resulting data were analyzed and suitable models were developed after identification of the active ranges. Subsequently, a biological activity was assigned to each of the compounds using these models and compared with the reported anti-HIV-1 activity. High accuracy of prediction was observed using these models. Statistical analysis revealed significance of the proposed models as well as a lack of correlation between the topochemical indices employed for the chosen data set.     

Synthesis, structures, and optical and electrochemical characteristics of novel crown-containing polythiophene systems

The synthesis, structures, and optical and electrochemical characteristics of novel crown-containing styryl mono-and polythiophenes were described. The double bonds were constructed by the Horner-Wadsworth-Emmons method. The Suzuki and Stille cross-coupling reactions were used to create polythiophene chains. Optical measurements revealed intense absorption and fluorescence of crown-containing polythiophenes; the band positions and shapes in their absorption and emission spectra depend on the structure of the polythiophene. The electrochemical characteristics of the compounds obtained were measured. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 932–939, May, 2007.     

C4/C5烃催化裂解制低碳烯烃的研究进展

从催化剂类型、裂解工艺、催化裂解的影响因素和裂解机理4个方面对国内外C4/C5烃催化裂解制低碳烯烃的研究进行了综述。催化裂解制低碳烯烃催化剂主要采用ZSM-5分子筛系列催化剂,在此基础上发展了酸改性或水热改性高硅ZSM系列分子筛及介孔MCM-41分子筛。总结了国内外C4/C5烃的裂解工艺,认为影响催化裂解的主要因素是裂解原料、催化剂类型及工艺条件。目前,裂解机理主要是自由基与碳正离子机理相结合的机理。并简述了本课题组目前有关C4烷烃催化裂解的主要研究进展。     

一类窄带隙芴基共聚物的合成及其在发光二极管和太阳电池中的应用

基于9,9-二辛基芴(DOF)与窄带隙单体2,3-二甲基-5,8-二噻吩-喹喔啉(DDQ),通过Suzuki偶合反应,合成了一系列无规和交替窄带隙的芴基共聚物(PFO-DDQ),并对它们的紫外-可见吸收光谱、光致发光光谱、电致发光性能和光伏性能进行了初步研究.共聚物在380 nm和490 nm处有两处明显的吸收峰,其中490nm处的吸收强度随着共聚物中窄带隙单元(DDQ)含量的增加而成比例加强.随着共聚物中窄带隙单元(DDQ)含量的增加,电致发光峰值从580 nm红移到了635 nm.基于该类材料的橙红或饱和红色发光二极管最大外量子效率为1.33%,流明效率为1.54 Cd/A.试验中观察到了窄带隙单元的能量陷阱机制.以窄带隙单元含量为30%的聚合物(PFO-DDQ30)为电子给体、PCBM为电子受体所制备的共混体相异质结太阳电池最大能量转换效率为1.18%,开路电压0.9 V,短路电流密度2.66 mA/cm2.光敏曲线覆盖300 nm~700 nm.     

二氰基二硫纶和邻菲罗啉二酮的镍(Ⅱ)、铜(Ⅱ)、锌(Ⅱ)配合物的合成与性质

二氰基二硫纶和邻菲罗啉二酮的镍（Ⅱ）、铜（Ⅱ）、锌（Ⅱ）配合物的合成与性质彭正合＊潘庆才ａ任小明ｂ张克立秦子斌（武汉大学化学系，武汉４３００７２；ａ南京大学配位化学国家重点实验室，南京２１００９３）关键词：二硫纶邻菲罗啉二酮镍铜锌二硫纶（ｄｉｔｈｉｏ...     

水杨醛—5—溴—水杨酰腙的合成及其与钪荧光反应的研究

腙类试剂荧光法测定A13＋[1]、Ga3＋[2]、Mn2＋[3]已显示出灵敏度高及选择性好等优点，但尚未见水杨醛一5一澳一水杨酸踪（简称SABSH）荧光法测定无机离子的报道．本文合成了SAB－SH，测定了试剂酸离解常数，研究了试剂与抗荧光反应的最佳条件，建立的分析方法相对标准偏差为0．95％，检测下限为0．15ng／mL，考察了40种共存离子的干扰情况．结果表明，在选择性较好的条件下，该法同用各种综试剂荧光法测定其它无机金属离子比较具有灵敏度高的优越性［’－’j，将其用于经预分离的土壤地质样中痕量锐的测定，结果满意．1实验部分1．l…     

3-芳基-5-巯基-1,2,4-三唑的亲核取代反应研究

以3-芳基-5-巯基-1,2,4-三唑为原料合成了20个3-芳基-1,2,4-三唑-5-巯基乙酸乙酯(2a～e)、3-芳基-1,2,4-三唑-5-巯基乙酸(3a～e)、3-芳基-5,6-二氢噻唑并[2,3-c]均三唑(5a～e)和3-芳基-6,7-二氢均三唑并[3,4-b][1,3]噻嗪(6a～e)。研究了3a～e在微波辐射下的环化反应，合成了5个3-芳基-5-氧代-6H-噻唑[2,3-c]均三唑(4a～e)。产物经元素分析、红外、核磁共振以及质谱方法确定了结构。初步研究了代表化合物的生物活性。     

丙烷在无机膜反应器中的芳构化

研究了在固定床反应器和膜反应器中的丙烷芳构化，考察了ＨＺＳＭ－５担载的Ｇａ和Ｐｔ－Ｇａ催化剂对反应的影响。结果表明，采用无机膜反应器可以提高丙烷芳构化选择性，从而提高芳烃收率达１０％以上。在膜反应器中，低碳烷烃选择性降低，烯烃选择性增强。固定床相比，膜反应器在低温时对芳构化反应的促进作用最为显著，但是随着温度升高，其促进作用减弱。     

固相配位化学反应研究——ⅩⅩⅩⅩⅠ.[Co(NH_3)_5(H_2O)]Br_3,[Cr(NH_3)_5(H_2O)](NO_3)_3与无机盐KY(Y=Cl,Br,Ⅰ)的固相反应动力学研究

本文主要用气相色谱逸出气体分析方法,借助于红外、紫外可见漫反射谱等手段研究了[Co(NH_3)_5(H_2O)]Br_3、[Cr(NH_3)_5(H_2O)](NO_3)_3与无机盐KY(Y=Cl,Br,Ⅰ)的固相反应,计算了失水与失氨的动力学参数,发现第一步反应失水生成一取代中间产物,其活化能与外加阴离子无关,为S_N1过程。第二步失氨反应活化能与中心离子M以及取代基Y有关,当M=Co(Ⅲ)时,反应体系的失氨活化能大小有下列顺序:Cl>Br>Ⅰ(E值分别为187、155、98kJ·mol~(-1)),M=Cr(Ⅲ)时则正好相反:Ⅰ>Br>Cl(E值分别为213、146、79 kJ·mol~(-1))。