乙酸乙烯酯氢甲酰化串联反应高选择性合成乙酰氧基丙酮的研究

研究了一种通过乙酸乙烯酯的氢甲酰化反应以及苯甲酸钾促进异构化制取α-乙酰氧基丙酮的反应.通过实验确定了以HRh(CO)(TPP)3/TPP为催化剂,配体和铑的比例为10,合成气压力为3.0 MPa(H2/CO=1/1),底物与催化剂的比例(S/C)为1000,DMSO为溶剂,苯甲酸钾为添加剂,在110℃反应2 h,乙酰...     

Cooling-induced increase of methane cluster size investigated under a Coulomb explosion scheme

In this letter, we discuss the increase in the average cluster size by lowering the stagnation temperature of the methane （CH4） gas. The Coulomb explosion experiments are conducted to estimate the cluster size and the size distribution. The average CH4 cluster sizes Nay of 6 230 and 6 580 are acquired with the source conditions of 30 bars at 240 K and 60 bars at 296 K, respectively. Empirical estimation suggests a five-fold increase in the average size of the CH4 clusters at 240 K compared with that at room temperature under a backing pressure of 30 bars. A strong nonlinear Hagena parameter relation （Г^＊∝ T0^-3.3） for the CH4 clusters is revealed. The results may be favorable for the production of large-sized clusters by using gases at low temperature and high back pressures.     

Grand canonical Monte Carlo simulation for hydrogen uptakes based on nanoporous NaBH4

A new hydrogen storage route of 3D nanoporous sodium borohydride (NPSB) generated by removing special atoms is proposed in this work. Three different size pores of NPSB-1 (7), NPSB-2 (10) and NPSB-3 (14) are presented, and the hydrogen storage capacities of these NPSBs are simulated by employing a grand canonical Monte Carlo (GCMC) procedure for a temperature range of 77-298 K and a pressure range of 0.1-100 bar. The effects of pore diameter, temperature and pressure on the hydrogen adsorption have been examined. The results show that the adsorption of hydrogen decreases and increases with increasing temperature and hydrogen pressure, respectively. It also reflects that the hydrogen adsorption capacities at higher pressures are dependent on pore diameter, while independent of pore diameter at lower pressures.     

尖晶石型LiMn2O4的低温制备

锂锰氧化物;溶胶凝胶法;尖晶石型LiMn2O4的低温制备     

一个吡啶二甲酸镉配位聚合物的合成、晶体结构及荧光性质

通过水热方法,采用H3CAM(H3CAM=4-hydroxy-pyridine-2,6-dicarboxylic acid)与Cd(NO3)2.4H2O反应,合成了1个镉配位聚合物[Cd4(HCAM)4(H2O)8]n(1),并对其结构和荧光性质进行了研究。结构分析结果表明该配合物属于单斜晶系,C2/c空间群。四个HCAM2-配体桥联4个镉离子形成了1个四核镉单元。这些孤立的单元通过氢键作用形成了1个三维配位框架。研究表明,该配合物在室温下能发出兰色荧光。     

硫代糖苷在糖化学合成中的应用

介绍了近几年来有关硫代糖苷在一些复杂寡糖及其缀合物合成中的应用。     

新的压电薄膜——Ta2O5

据报道,日本Yasuhiko Nakagawa和Yasuo Gomi用磁控反应直流二极管溅射法将Ta_2O_5,沉积在石英基片上,得到了单晶薄膜,并且首次观察到了这种薄膜的压电现象.用叉指换能器在Ta_2O_5薄膜上成功地激发了声表面波.在Ta_2O_5/熔石英基片上,当薄膜厚度h在hk(=2πh/λ)=1.0时,其机电耦合系数k~2=0.5％,它可与熔石英基片上ZnO薄膜的机电耦合系数相比拟. 利用Ta_2O_5单晶的X射线衍射数据,推断出Ta_2O_5     

金属-绝缘体-半导体(Au-SiO2-Si)隧道结的负阻现象与发光特性

制备了Au-SiO_{2-Si结构MIS隧道发光结.测试并分析了该结的发光特性及电流-电压(I-V)特性.指出结的发光是由各膜层界面激发的表面等离极化激元(Surface Plasmon Polariton.SPP)与膜层表面粗糙度相互耦合的结果.观察到MIS结I-V特性中存在的负阻现象,采用SPP对电子的束缚模型对这一现象进行了初步分析.利用原子力显微镜(AFM)对结的表面形貌进行了观测,由此讨论了MIS隧道结的发光与电子在结内的隧穿输运特性之间的内在关系. 关键词：}     

HT—6M闭环反馈平衡控制系统

本文描述HT-6M托卡马克装置闭环反馈平衡控制系统的结构组成,通过对各个环节的简化,得到了有效实用的数学模型,进而分析了系统稳态和动态性能。实验结果表明,该系统运行可靠;并且,将等离子体环水平位移控制在2mm以内。