手性5-l-(艹孟)氧基丁内酯并[3,4-d]-3-取代基-异(口恶)唑啉类化合物的合成

研究了手性元5-(R)-(l-(艹孟)氧基)-2(5H)-呋喃酮与取代苯甲醛肟以次氯酸钙作为氧化剂进行的区域选择性原位1,3-偶极环加成反应,同步生成两个新的手性中心,得到了一系列光学纯丁内酯并[3,4-d]-3-取代基-异(口恶)唑啉类化合物;应用波谱学手段及X射线单晶衍射法确证了产物的绝对构型,并对产物的核磁共振氢谱规律性加以总结.     

Photocurrent generation in multilayer self-assembly films fabricated from water-soluble poly(phenylene vinylene)

A novel, water-soluble, cationic PPV derivative poly[(2,5-bis(3-bromotrimethylammoniopropoxy)-phenylene-1,4-divinylene)-alt-1,4-(2,5-bis(2-(2-hydroxyethoxy)ethoxy))phenylene vinylene] (BH-PPV) has been synthesized by a Heck coupling reaction. Multilayered assemblies of the BH-PPV and the sodium salt of hexa(sulfobutyl)fullerenes (C(60)-HS) were fabricated successfully by an alternate deposition technique. The multilayer structures were studied by UV/Vis spectroscopy, small angle X-ray diffraction, and atomic force microscopy. The photoinduced charge transfer property of the self-assembled multilayer film was also measured by a three-electrode cell technique. A steady and rapid cathodic 5.5 microA cm(-2) photocurrent response was measured as the irradiation of the multilayer film was switched on and off. Importantly, the response of on/off cycling is prompt and reproducible. A possible mechanism for the electron-transfer process is proposed.     

Reactions of substituted furo[3,2-<Emphasis Type="Italic">b</Emphasis>]pyrrole-5-carboxhydrazides and their biological activity

The reactions of substituted furo[3,2-b]pyrrole-5-carboxhydrazides 1 with 5-arylfuran-2-carboxaldehydes 2, 4,5-disubstituted furan-2-carboxaldehydes 3 and thiophene-2-carboxaldehyde 4 has been studied. The advantage of microwave irradiation on some of these reactions was reflected in the reduced reaction time and increased yields. Reactions of 1 with 4-substituted 1,3-oxazol-5(4H)-ones 11 led to diacylhydrazines 13 or to imidazole derivatives 14 depending on the temperature. 1,2,4-Triazole-3-thione 17 was synthesized by two-step reaction of 1 with phenylisothiocyanate and subsequent base-catalyzed cyclization of thiosemicarbazide 16. The effects of hydrazones 5–10 on inhibition of photosynthetic electron transport in spinach chloroplasts and chlorophyll content in the antialgal suspensions of Chlorella vulgaris were investigated.     

Theoretical study and rate constant calculation for the reactions of SH (SD) with Cl2, Br2, and BrCl

The mechanisms of the SH (SD) radicals with Cl2 (R1), Br2 (R2), and BrCl (R3) are investigated theoretically, and the rate constants are calculated using a dual-level direct dynamics method. The optimized geometries and frequencies of the stationary points are calculated at the MP2/6-311G(d,p) and MPW1K/6-311G(d,p) levels. Higher-level energies are obtained at the approximate QCISD(T)/6-311++G(3df, 2pd) level using the MP2 geometries as well as by the multicoefficient correlation method based on QCISD (MC-QCISD) using the MPW1K geometries. Complexes with energies less than those of the reactants or products are located at the entrance or the exit channels of these reactions, which indicate that the reactions may proceed via an indirect mechanism. The enthalpies of formation for the species XSH/XSD (X = Cl and Br) are evaluated using hydrogenation working reactions method. By canonical variational transition-state theory (CVT), the rate constants of SH and SD radicals with Cl2, Br2, and BrCl are calculated over a wide temperature range of 200-2000 K at the a-QCISD(T)/6-311++G(3df, 2pd)//MP2/6-311G(d, p) level. Good agreement between the calculated and experimental rate constants is obtained in the measured temperature range. Our calculations show that for SH (SD) + BrCl reaction bromine abstraction (R3a or R3a') leading to the formation of BrSH (BrSD) + Cl in a barrierless process dominants the reaction with the branching ratios for channels 3a and 3a' of 99% at 298 K, which is quite different from the experimental result of k3a'/k3' = 54 +/- 10%. Negative activation energies are found at the higher level for the SH + Br2 and SH + BrCl (Br-abstraction) reactions; as a result, the rate constants show a slightly negative temperature dependence, which is consistent with the determination in the literature. The kinetic isotope effects for the three reactions are "inverse". The values of kH/kD are 0.88, 0.91, and 0.69 at room temperature, respectively, and they increase as the temperature increases.     

Silica nanoparticles for separation of biologically active amines by capillary electrophoresis with laser-induced native fluorescence detection

This paper describes the analysis of biologically active amines by capillary electrophoresis (CE) in conjunction with laser-induced native fluorescence detection. In order to simultaneously analyze amines and acids as well as to achieve high sensitivity, 10 mM formic acid solutions (pH < 4.0) containing silica nanoparticles (SiNPs) were chosen as the background electrolytes. With increasing SiNP concentration, the migration times for seven analytes decrease as a result of increase in electroosmotic flow (EOF) and decrease in their electrophoretic mobilities against EOF. A small EOF generated at pH 3.0 reveals adsorption of SiNPs on the deactivated capillary wall. The decreases in electrophoretic mobilities with increasing SiNP concentration up to 0.3x indicate the interactions between the analytes and the SiNPs. Having a great sensitivity (the limits of detection at a signal-to-noise ratio (S/N) = 3 of 0.09 nM for tryptamine (TA)), high efficiency, and excellent reproducibility (less than 2.4% of the migration times), this developed method has been applied to the analysis of urinal samples with the concentrations of 0.50 +/- 0.02 microM, 0.49 +/- 0.04 microM, and 74 +/- 2 microM for TA, 5-hydroxytryptamine, and tryptophan, respectively. The successful examples demonstrated in this study open up a possibility of using functional nanoparticles for the separation of different analytes by CE.     

Identification (GC and GC-MS) of unsaturated acetates in Elasmopalpus lignosellus and their biological activity (GC-EAD and EAG)

Two insect colonies of Elasmopalpus lignosellus were reared in our laboratory, the first being initiated from pupae obtained from a cornfield in the region of Sete Lagoas, Minas Gerais and the second from a cornfield in the region of Goiania, Goiás. From the two colonies, two extracts were prepared from the pheromone glands of virgin E. lignosellus females. The extract obtained from the first colony was designated as extract 1 while the extract obtained from the second colony was designated as extract 2. Extract 1 was analyzed by gas chromatography-mass spectrometry (GC-MS) with (Z)-9-hexadecenyl acetate [(Z)-9-HDA] and (Z)-11-hexadecenyl acetate [(Z)-11-HDA] being identified and confirmed by the formation of DMDS derivatives. In addition, a third acetate, which could be either (E)-8-hexadecenyl acetate [(E)-8-HDA] or (E)-9-hexadecenyl acetate [(E)-9-HDA] was detected by GC-MS. Extract 2 was analyzed by gas chromatography (GC) and gas chromatography-electroannetography (GC-EAD) revealing the presence of (Z)-11-HDA and (Z)-9-TDA. In addition, the same compounds elicited a response with the E. lignosellus male antenna obtained from the second insect colony. Electroantennography (EAG) screening with the male E. lignosellus antenna (obtained from the second insect colony) was conducted with the 23 possible tetradecenyl acetates (TDA) and 22 hexadecenyl acetates (HDA) as standards. Out of the 23 TDA isomers evaluated, only (Z)-9-TDA elicited a response and out of the 22 HDA [(Z) and (E) isomers gamma2 to delta13] evaluated only (Z)-11-HDA elicited a response. The acetate compositions of two extracts obtained from insects originating from the two states (Minas Gerais and Goiás) of Brazil were different from one another as well as from that obtained from insects in Tifton, GA, USA. The bioactivity data (GC-EAD) of the extract 2 differed from those reported for the Tifton, GA, USA population. These data suggest polymorphism in relation to the insect populations found in Brazil and in the USA. The possibility of the existence of an E. lignosellus sub-species cannot be ruled out.     

Fluoroapatite - material for medicine,Growth, morphology and thermoanalytical properties

Fluoroapatite containing glass-ceramics were prepared from Li₂O-CaO-CaF₂-P₂O₅-SiO₂ system. The glass was melted at 1480°C for 1 h. The object of observation was the preparing crystal phase of fluoroapatite in amorphous glass matrix. The morphology of lithium disilicate glass-ceramics was studied by SEM. The crystal growth and thermal properties of fluoroapatite were studied by X-ray diffraction and DTA. The more the content of P₂O₅, the more the presence of fluoroapatite particles. SEM investigation clearly indicated the phase separation and formation of a primary crystalline phase of fluoroapatite in the studied glass-ceramics. DTA curves of the fluoroapatite samples exhibit exothermic effects in the temperature range 337-694°C depending on the composition of the materials. The position of exothermic peak for lithium disilicate on DTA curves moves with increasing specific surfacetowards lower temperatures which points on its preferential surface crystallization. As far as physical qualities are concerned, mainly color and gloss, the best qualities of all observed materials belong to glass-ceramics with 10% P₂O₅. This revised version was published online in July 2006 with corrections to the Cover Date.     

Reaction Of 3-Nitro-1,2,4-triazolederivatives with Alkylating Agents. 1. Alkylation in the Presence of Alkali

Alkylation of 3-nitro-1,2,4-triazole and 5-methyl-3-nitro-1,2,4-triazole with dialkyl sulfates or alkyl halides in the presence of alkali proceeds with a low selectivity for the alkylating agent with the formation of two regioisomers at the N₍₁₎ and N₍₂₎ atoms of the heterocycle. Depending on the reaction conditions the proportion of the N₍₂₎ isomer was 14.6-33.8%. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 1020–1025, July, 2005.     

Oxidative addition of the ethane C-C bond to Pd. An ab initio benchmark and DFT validation study

We have computed a state-of-the-art benchmark potential energy surface (PES) for the archetypal oxidative addition of the ethane C-C bond to the palladium atom and have used this to evaluate the performance of 24 popular density functionals, covering LDA, GGA, meta-GGA, and hybrid density functionals, for describing this reaction. The ab initio benchmark is obtained by exploring the PES using a hierarchical series of ab initio methods [HF, MP2, CCSD, CCSD(T)] in combination with a hierarchical series of five Gaussian-type basis sets, up to g polarization. Relativistic effects are taken into account either through a relativistic effective core potential for palladium or through a full four-component all-electron approach. Our best estimate of kinetic and thermodynamic parameters is -10.8 (-11.3) kcal/mol for the formation of the reactant complex, 19.4 (17.1) kcal/mol for the activation energy relative to the separate reactants, and -4.5 (-6.8) kcal/mol for the reaction energy (zero-point vibrational energy-corrected values in parentheses). Our work highlights the importance of sufficient higher angular momentum polarization functions for correctly describing metal-d-electron correlation. Best overall agreement with our ab initio benchmark is obtained by functionals from all three categories, GGA, meta-GGA, and hybrid DFT, with mean absolute errors of 1.5 to 2.5 kcal/mol and errors in activation energies ranging from -0.2 to -3.2 kcal/mol. Interestingly, the well-known BLYP functional compares very reasonably with a slight underestimation of the overall barrier by -0.9 kcal/mol. For comparison, with B3LYP we arrive at an overestimation of the overall barrier by 5.8 kcal/mol. On the other hand, B3LYP performs excellently for the central barrier (i.e., relative to the reactant complex) which it underestimates by only -0.1 kcal/mol.     

Supramolecular approaches to generate libraries of chelating bidentate ligands for homogeneous catalysis

The process of catalyst discovery and development relying on combinatorial methods has suffered so far from the difficult access to structurally diverse and large libraries of ligands, in particular the structurally more complex class of bidentate ligands. A completely new approach to streamline the difficult ligand synthesis process is to use structurally less complex monodentate ligands that self-assemble in the coordination sphere of a metal center through noncovalent attractive ligand-ligand interactions to generate bidentate, chelating ligands. When complementary attractive ligand-ligand interactions are employed, it is even possible to generate libraries of defined chelate-ligand catalysts by simply mixing two different monomeric ligands. This Minireview summarizes the first approaches and results in this new field of combinatorial homogeneous catalysis.