2-Polyfluoroalkylchromones. 9. Synthesis and structures of 5-(2-hydroxyaryl)-7-polyfluoroalkyl-1,4,8-triazabicyclo[5.3.0]dec-4-enes

2-Polyfluoroalkylchromones reacted with diethylenetriamine at 20 °C to form the corresponding 1,4,8-triazabicyclo[5.3.0]dec-4-ene derivatives. The crystal structures of 5-(2-hydroxyphenyl)-7-trifluoromethyl-1,4,8-triazabicyclo[5.3.0]dec-4-ene and 1-(2-aminoethyl)-7-(2-hydroxy-5-methoxyphenyl)-5-(1,1,2,2-tetrafluoroethyl)-2,3-dihydro-1H-1,4-diazepine were established by X-ray diffraction analysis.     

(R)-2,3-Cyclohexylideneglyceraldehyde, a novel template for facile and simple entry into chiral hydroxy γ-lactones: synthesis of (−)-muricatacin

(R)-2,3-Cyclohexylideneglyceraldehyde 1 has been used in a simple and efficient synthesis of (−)-muricatacin 10. The required chiron, syn-alkanetriol 2a was prepared by the reduction of a ketone 3 derived from 1.     

Ab initio studies of the protonation of CO,N2 and NO+: Calculation of the minimum energy reaction paths

Ab initio molecular orbital calculations employing a 4-31G basis set have been used to study the minimum energy paths for the formation of HCO⁺, COH⁺, and HCOH²⁺ from CO by protonation. The protonation of N₂ to give NNH⁺ and HNNH²⁺ and of NO⁺ to form HNO²⁺ and NOH²⁺ have also been investigated. All species formed have linear equilibrium geometries and the minimum energy path for approach of the proton is along the line-of-centers of the heavy atoms. Energy barriers to the formation of the various species are given, where appropriate, and changes in geometry, ordering of molecular orbitals and orbital occupancy are discussed.     

2-Trif luoromethyl-4H-thiochromen-4-one and 2-trif luoromethyl-4H-thiochromene-4-thione: Synthesis and reactivities

2-Trifluoromethyl-4H-thiochromene-4-thione obtained from 2-trifluoromethyl-4H-thiochromen-4-one and P₂S₅ reacts with aromatic amines, hydrazine hydrate, phenylhydrazine, and hydroxylamine at the C(4) atom of the chromene ring to give the corresponding anils, azine, hydrazones, and oxime of thiochromone. 2-Trifluoromethyl-4H-thiochromen-4-one is oxidized by hydrogen peroxide in AcOH into 4-oxo-2-trifluoromethyl-4H-thiochromene 1,1-dioxide and reduced by NaBH₄ to 2-trifluoromethyl-4H-thiochromen-4-ol or cis-2-(trifluoromethyl)thiochroman-4-ol. When treated with hydrazine hydrate, thiochromen-4-one gives 3(5)-(2-mercaptophenyl)-5(3)-trifluoromethylpyrazole. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 504–509, March, 2006.     

Ein Neues,tricyclisches schwefelreiches Phosphan

A New Tricyclic Sulfur-rich Phosphane From the products of the reaction of P₄S₃ with tert-Butyliodide the compound (t-Bu(S)P)₂P₄S₃ was isolated in low yield. The compound is stable and has a structure related to the hydrocarbon brexane. By reaction with triphenylphosphin the compounds (t-BuP)(t-Bu(S)P)P₄S₃ and (t-BuP)₂P₄S₃ were obtained. The ³¹P-nmr spectra of all compounds were solved and used to determine the structure of the molecules. A complete set of ³¹P-nmr data is given.     

Synthesis of PNIPAAm-g-P4VP Microgel as Draw Agent in Forward Osmosis by RAFT Polymerization and Reverse Suspension Polymerization to Improve Water Flux

Microgels have unique and versatile properties allowing their use in forward osmosis areas as a draw agent. In this contribution, poly(4-vinylpyridine) (P4VP) was synthesized via RAFT polymerization and then grafted to a poly(N-Isopropylacrylamide) (PNIPAAm) crosslinking network by reverse suspension polymerization. P4VP was successfully obtained by the quasiliving polymerization with the result of nuclear magnetic resonance and gel permeation chromatography characterization. The particle size and particle size distribution of the PNIPAAm-g-P4VP microgels containing 0, 5, 10, 15 and 20 wt% P4VP were measured by means of a laser particle size analyzer. It was found that all the microgels were of micrometer scale and the particle size was increased with the P4VP load. Inter/intra-molecular-specific interactions, i.e., hydrogen bond interactions were then investigated by Fourier infrared spectroscopy. In addition, the water flux measurements showed that all the PNIPAAm-g-P4VP microgels can draw water more effectively than a blank PNIPAAm microgel. For the copolymer microgel incorporating 20 wt% P4VP, the water flux was measured to be 7.48 L∙m⁻²∙h⁻¹.     

晶格畸变检测仪研究碳化硅晶片中位错缺陷分布

利用晶格畸变检测仪研究了SiC晶片位错分布情况,通过对熔融KOH腐蚀后的SiC晶片进行全片或局部扫描,从而得到完整SiC晶片或局部区域的位错分布.与LEXT OLS40003D激光共聚焦显微镜扫描腐蚀图进行比较,晶格畸变检测仪扫描腐蚀图可以将晶片上位错腐蚀坑信息完全呈现出来,且根据腐蚀坑呈现的颜色及尺寸大小,可以分辨出...     

Discriminating between Parallel,Anti-Parallel and Hybrid G-Quadruplexes: Mechanistic Details on Their Binding to Small Molecules

G-quadruplexes (G4) are now extensively recognised as a peculiar non-canonical DNA geometry that plays a prime importance role in processes of biological relevance whose number is increasing continuously. The same is true for the less-studied RNA G4 counterpart. G4s are stable structures; however, their geometrical parameters may be finely tuned not only by the presence of particular sequences of nucleotides but also by the salt content of the medium or by a small molecule that may act as a peculiar topology inducer. As far as the interest in G4s increases and our knowledge of these species deepens, researchers do not only verify the G4s binding by small molecules and the subsequent G4 stabilisation. The most innovative studies now aim to elucidate the mechanistic details of the interaction and the ability of a target species (drug) to bind only to a peculiar G4 geometry. In this focused review, we survey the advances in the studies of the binding of small molecules of medical interest to G4s, with particular attention to the ability of these species to bind differently (intercalation, lateral binding or sitting atop) to different G4 topologies (parallel, anti-parallel or hybrid structures). Some species, given the very high affinity with some peculiar G4 topology, can first bind to a less favourable geometry and then induce its conversion. This aspect is also considered.     

Insight into the Inclusion Complexation of Fluconazole with Sulfonatocalix[4]naphthalene in Aqueous Solution,Solid-State,and Its Antimycotic Activity

The study aims to assess the interaction between fluconazole and sulfonatocalix[4]naphthalene towards enhancing its dissolution performance and antimycotic activity. A solubility study was carried out at different pH conditions, and the results revealed the formation of a 1:1 molar ratio fluconazole-sulfonatocalix[4]naphthalene inclusion complex with an A_L type phase solubility diagrams. The solid powder systems of fluconazole-sulfonatocalix[4]naphthalene were prepared using kneaded and co-evaporation techniques and physical mixtures. DCS, PXRD, TGA-DTG, FT-IR, and in vitro dissolution performance characterize the prepared systems. According to physicochemical characterization, the co-evaporation approach produces an amorphous inclusion complex of the drug inside the cavity of sulfonatocalix[4]naphthalene. The co-evaporate product significantly increased the drug dissolution rate up to 93 ± 1.77% within 10 min, unlike other prepared solid powders. The antimycotic activity showed an increase substantially (p ≤ 0.05, t-test) antimycotic activity of fluconazole co-evaporate mixture with sulfonatocalix[4]naphthalene compared with fluconazole alone against clinical strains of Candida albicans and Candida glabrata. In conclusion, sulfonatocalix[4]naphthalene could be considered an efficient complexing agent for fluconazole to enhance its aqueous solubility, dissolution performance, and antimycotic activity.     

Numerical Study of φ4 Model by Potential Importance Sampling Method

We investigate the phenomena of spontaneous symmetry breaking for φ⁴ model on a square lattice in the parameter space by using the potential importance sampling method, which was proposed by Milchev, Heermann, and Binder [J. Stat. Phys. 44 (1986) 749]. The critical values of the parameters allow us to determine the phase diagram of the model. At the same time, some relevant quantities such as susceptibility and specific heat are also obtained.