采用可见/近红外光谱检测大麦叶片过氧化氢酶与过氧化物酶含量的研究

采用可见/近红外光谱对丙酯草醚胁迫下大麦叶片过氧化氢酶(catalase, CAT)与过氧化物酶(peroxidase, POD)含量预测进行研究。对500～900 nm光谱采用移动平均法(moving average, MA)11点平滑方法进行预处理。采用蒙特卡罗-偏最小二乘法(monte carlo-partial least squares, MCPLS)方法分别对于CAT与POD的含量预测剔除7个与8个异常样本。基于全部光谱建立了CAT与POD含量预测的PLS,最小二乘支持向量机(least-squares support vector machine, LS-SVM)与极限学习机(extreme learning machine, ELM)模型,ELM模型对CAT含量预测效果最好,建模集相关系数(correlation coefficient of calibration, R_c)为0.916,预测集相关系数R_p为0.786;PLS模型对POD含量预测效果最佳,R_c为0.984,R_p为0.876。采用连续投影算法(successive projections algorithm, SPA)算法分别为CAT与POD预测选择了8个与19个特征波长,基于特征波长建立的PLS,LS-SVM与ELM模型中,ELM模型对CAT与POD含量预测效果均最佳,CAT含量预测的相关系数为R_c=0.928,R_p=0.790;POD含量预测的相关系数R_c=0.965,R_p=0.941。基于全谱与基于特征波长的回归分析模型预测效果相当,且对POD含量的预测效果优于对CAT含量的预测效果,而这需要进一步研究以得到精度和稳定性更高的预测模型。研究结果表明,采用可见/近红外光谱结合化学计量学方法可以实现对除草剂胁迫下大麦叶片CAT与POD含量的预测。     

Luminescence investigation of red phosphors Ca0.54Sr0.34−1.5xEu0.08Smx(MoO4)y (WO4)1−y for UV-white LED device

Ca_0.54Sr_0.34−1.5xEu_0.08Sm_x(MoO₄)_y (WO₄)_1−y red phosphors were prepared by solid-state reaction using Na⁺ as a charge compensator for light-emitting diodes (LED). The effects of Na⁺ concentration, synthesis temperature, reaction time and Eu³⁺ concentration were studied for the properties of luminescence and crystal structure of red phosphors. The results show that the optimum reaction condition is 6%, 900 °C, 2 h and 8%. The photoluminescence spectra show that red phosphors are effectively excited at 616 nm by 292, 395 and 465 nm. The wavelengths of 465 nm nicely match the widely applied emission wavelengths of blue LED chips.     

Investigation of defect centres responsible for TL/OSL in MgAl2O4:Tb

Magnesium aluminate doped with Tb³⁺ (MgAl₂O₄:Tb³⁺) was prepared by combustion synthesis. Three thermoluminsence (TL) peaks at 120, 220 and 340 °C were observed. PL and TL emission spectrum shows that Tb³⁺ acts as the luminescent centre. Optically stimulated luminescence (OSL) was observed when stimulated by 470 nm blue light.Electron spin resonance (ESR) studies were carried out to identify the defect centres responsible for the TL and OSL processes in MgAl₂O₄:Tb³⁺. Two defect centres were identified in irradiated MgAl₂O₄:Tb³⁺ phosphor by ESR measurements which was carried out at room temperature and these were assigned to V and F⁺ centres. V centre (hole centre) is correlated to 120 and 220 °C TL peaks and F⁺ centre (electron centre), which acts as a recombination centre is correlated to 120, 220 and 340 °C.     

Experimental low energy values of CH4 transitions near 1.33 μm by absorption spectroscopy at 81 K

The high resolution absorption spectrum of methane has been recorded at liquid nitrogen temperature by direct absorption spectroscopy between 1.36 and 1.30 μm (7351-7655 cm⁻¹) using a cryogenic cell and a series of distributed feed back (DFB) diode lasers. The investigated spectral range corresponds to the high energy part of the icosad dominated by the ν₂+2ν₃ band near 7510 cm⁻¹. The positions and strengths at 81 K of 3473 transitions were obtained from the spectrum analysis. The minimum value of the measured line intensities (at 81 K) is on the order of 10⁻²⁶ cm/molecule, i.e. significantly lower than the intensity cut off of the HITRAN database in the region (4×10⁻²⁵ cm/molecule at 296 K). From the variation of the line strength between 81 and 296 K, the low energy values of 1273 transitions could be determined. They represent 69% and 81% of the absorbance in the region at 296 and 81 K, respectively. The obtained results are discussed in relation with the few rovibrational assignments previously reported in the region.     

Influence of the substrate material on the properties of pulsed laser deposited thin Li1+xMn2O4−δ films

Thin Li_1+xMn₂O_4−δ films were deposited on several substrate materials (stainless steel, p-doped silicon and glassy carbon) by pulsed laser deposition. To obtain the correct thin film stoichiometries, targets with a different amount of excess lithium were required (Li_1.03Mn₂O₄ + xLi₂O; x = 2.5 and 7.5 mol%). The resulting polycrystalline thin films were characterized with respect to their morphology and electrochemical activity. It was found that only thin Li_1+xMn₂O_4−δ films deposited on stainless steel and glassy carbon showed the typical insertion and deinsertion peaks of Li⁺ during cycling.     

Biosynthesis and magnetic properties of mesoporous Fe3O4 composites

Magnetic Fe₃O₄ materials with mesoporous structure are synthesized by co-precipitation method using yeast cells as a template. The X-ray diffraction (XRD) pattern indicates that the as-synthesized mesoporous hybrid Fe₃O₄ is well crystallized. The Barrett-Joyner-Halenda (BJH) models reveal the existence of mesostructure in the dried sample which has a specific surface area of 96.31 m²/g and a pore size distribution of 8-14 nm. Transmission electron microscopy (TEM) measurements confirm the wormhole-like structure of the resulting samples. The composition and chemical bonds of the Fe₃O₄/cells composites are studied by Fourier transform infrared (FT-IR) spectroscopy. Preliminary magnetic properties of the mesoporous hybrid Fe₃O₄ are characterized by a vibrating sample magnetometer (VSM). The magnetic Fe₃O₄/cells composites with mesoporous structure have potential applications in biomedical areas, such as drug delivery.     

Photoluminescence properties of thenardite activated with Eu

Na₂SO₄:Eu phosphors were prepared by heating pure natural thenardite with EuF₃ at 900 °C for 20 min in air. The photoluminescence (PL) and excitation spectra of as-prepared and γ-ray-irradiated phosphors were observed at 300 K. The PL spectrum under 394 nm excitation consisted of strong narrow bands with peaks at 579, 592, 616, 652, 697 and 741 nm, assigned to the ⁵D₀→⁷F_J (J=0, 1, 2, …, 5) transitions, respectively, within Eu³⁺. The PL spectrum under 340 nm excitation consisted of a broad Eu²⁺ band with a peak at 435 nm. The excitation spectrum obtained by monitoring the violet luminescence consisted of a weak band with a peak at approximately 261 nm and a broad Eu²⁺ band with a peak at approximately 338 nm. The relative efficiency of the violet luminescence of the γ-ray-irradiated phosphor at the exposure of 46 kGy increased up to 3.0 times that of the unirradiated phosphor. The enhancement of violet luminescence by γ-ray irradiation was ascribed to the conversion of Eu³⁺ to Eu²⁺ in Na₂SO₄.     

Effect of intervening structure between CuO2 sheets in heavily Fe-substituted high-Tc superconductor FeSr2YCu2O6+δ

Heavily Fe-substituted Ba₂YCu₃O_6+δ-type compound FeSr₂YCu₂O_6+δ exhibits superconductivity around 60 K, only when it is annealed in N₂ and subsequently in O₂. Cationic distribution in this compound is strongly dependent on ionic radius at the Y site, and its superconducting properties are affected by the cationic distribution. In contrast, although the compound with the substitution of fluorite-type unit for Y has cationic order, it does not exhibit superconductivity. We have analyzed the crystal structure of the compounds with the substitution of other lanthanoid elements for Y and with substitution of fluorite-type unit for Y.     

一种新型红色荧光粉CaAl12O19： Eu,Mn的制备及发光性能

固相法制备了碱土金属铝酸盐荧光粉CaAl₁₂O₁₉ : Eu,Mn,测试了样品的XRD及激发与发射光谱,对样品的结构及其发光性能进行了分析,并且考察了灼烧温度及Eu³⁺的浓度对样品发光性能的影响,对Eu³⁺的作用机理进行了探讨。 该荧光粉能被波长短于550 nm的蓝绿光以及紫外和近紫外光激发,其发射光谱峰值在590,615,645,657 nm,其中前两个为Eu³⁺的特征发射,后两个为Mn⁴⁺的²E-⁴ A₂跃迁发射。该荧光粉的最佳烧结温度与时间分别为1 550 ℃和4 h,Eu³⁺的最佳掺杂摩尔分数为0.11%左右。     

ICP-AES测定钾石盐中的硫酸根离子

在选定的最佳条件下,样品直接溶解后采用ICP-AES测定钾石盐中硫酸根离子的含量,其最终检测结果与化学法测定结果一致。该方法简便、快速、线性范围宽、测量稳定。回收率为89.0%—102.0%。