Pressure and temperature dependence of the gas‐transport properties of dense poly[2,6‐toluene‐2,2‐bis(3,4‐dicarboxylphenyl)hexafluoropropane diimide] membranes

The gas‐transport properties of poly[2,6‐toluene‐2,2‐bis(3,4‐dicarboxylphenyl)hexafluoropropane diimide] (6FDA‐2,6‐DAT) have been investigated. The sorption behavior of dense 6FDA‐2,6‐DAT membranes is well described by the dual‐mode sorption model and has certain relationships with the critical temperatures of the penetrants. The solubility coefficient decreases with an increase in either the pressure or temperature. The temperature dependence of the diffusivity coefficient increases with an increase in the penetrant size, as the order of the activation energy for the diffusion jump is CH₄ > N₂ > O₂ > CO₂. Also, the average diffusion coefficient increases with increasing pressure for all the gases tested. As a combined contribution from sorption and diffusion, permeability decreases with increases in the pressure and the kinetic diameter of the penetrant molecules. Even up to 32.7 atm, no plasticization phenomenon can be observed on flat dense 6FDA‐2,6‐DAT membranes from their permeability–pressure curves. However, just as for other gases, the absolute value of the heat of sorption of CO₂ decreases with increasing pressure at a low‐pressure range, but the trend changes when the feed pressure is greater than 10 atm. This implies that CO₂‐induced plasticization may occur and reduce the positive enthalpy required to create a site into which a penetrant can be sorbed. Therefore, a better diagnosis of the inherent threshold pressure for the plasticization of a glassy polymer membrane may involve examining the absolute value of the heat of sorption as a function of pressure and identifying the turning point at which the gradient of the absolute value of the heat of sorption against pressure turns from a negative value to a positive one. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 354–364, 2004     

On a Question of Phillips

In [5] Phillips proved that one can obtain the additive group of any nonstandard model *? of the ring ? of integers by using a linear mod 1 function h : F ?, where F is the α-dimensional vector space over ? when α is the cardinality of *?. In this connection it arises the question whether there are linear mod 1 functions which are neither addition nor quasi-linear. We prove that this is the case.     

Shape transition from InAs quantum dash to quantum dot on InP(3 1 1)A

We report on the shape transition from InAs quantum dashes to quantum dots (QDs) on lattice-matched GaInAsP on InP(3 1 1)A substrates. InAs quantum dashes develop during chemical-beam epitaxy of 3.2 monolayers InAs, which transform into round InAs QDs by introducing a growth interruption without arsenic flux after InAs deposition. The shape transition is solely attributed to surface properties, i.e., increase of the surface energy and symmetry under arsenic deficient conditions. The round QD shape is maintained during subsequent GaInAsP overgrowth because the reversed shape transition from dot to dash is kinetically hindered by the decreased ad-atom diffusion under arsenic flux.     

Poly(L‐lysine) and clay nanocomposite with desired matrix secondary structure: Effects of polypeptide molecular weight

Nanocomposites (NC) were formed using cationic poly(L ‐lysine) (PLL), a semicrystalline polypeptide, that was reinforced by sodium montmorillonite (MMT) clay via solution intercalation technique. By varying solution conditions such as pH, temperature, and polypeptide concentration in the presence of clay platelets, the secondary structure of PLL was controllably altered into α‐helical, β‐sheet, and random coil. The high molecular weight polypeptide shows a strong propensity to fold into the β‐sheet structure when cast as films, irrespective of the initial secondary structure in solution. Nanocomposite local morphology confirms intercalated MMT platelets with PLL over a wide range of compositions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 239–252, 2007.     

Structure of norbornene-fused 3,1-oxazine double cycloadducts

Pentacyclic isoxazolines were obtained by the cycloaddition of benzonitrile oxide to norbornene-azetidinone-fused 3,1-oxazines. The constitutions of two of the isomers obtained, and the configurations and conformations of all products, were determined by means of ¹H and ¹³C NMR spectroscopy and DNOE experiments.     

Self‐curable polyester by a reaction of glycidol with maleic anhydride

The controlled reaction of equimolar quantities of maleic anhydride and glycidol in dimethoxyethane gives soluble polyesters with one hydroxyl group in each repeating unit. The reaction proceeds with stepwise ring opening of the components and gives highly viscous clear solutions in relatively short periods. In the first step, monomaleate ester formation takes place around 80 °C. The ring opening of the oxirane group is the second step, and it occurs at 120 °C. The overall reaction is the formation of soluble polyesters with moderate molecular weights (6000–18,000), without the elimination of water. The soluble polyesters can be crosslinked tightly by direct heating at 190 °C without additional vinyl monomer. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2549–2555, 2003     

1H and 13C NMR assignments of abietane diterpenes from Aegiphila lhotzkyana

An NMR study of one new and several known abietane diterpenes isolated from the roots of Aegiphila lhotzkyana is described. In addition to 1D NMR, several 2D shift‐correlated NMR pulse sequences (¹H–¹H‐COSY, NOESY, HMQC and HMBC) were used to establish all the structures, and unambiguously perform the ¹H and ¹³C chemical shift assignments of the new natural diterpene and three derivatives, the NMR data for which have not been reported previously. Revision of current data assignment for teuvincenone H is also suggested. Copyright © 2003 John Wiley & Sons, Ltd.     

Dihalodimethyltin(IV) complexes of 2‐(pyrazol‐1‐ylmethyl)pyridine

Reaction of dichloro‐ and dibromodimethyltin(IV) with 2‐(pyrazol‐1‐ylmethyl)pyridine (PMP) afforded [SnMe₂Cl₂(PMP)] and [SnMe₂Br₂(PMP)] respectively. The new complexes were characterized by elemental analysis and mass spectrometry and by IR, Raman and NMR (¹H, ¹³C) spectroscopies. Structural studies by X‐ray diffraction techniques show that the compounds consist of discrete units with the tin atom octahedrally coordinated to the carbon atoms of the two methyl groups in a trans disposition (Sn? C = 2.097(5), 2.120(5) Å and 2.110(6), 2.121(6) Å in the chloro and in the bromo compounds respectively), two cis halogen atoms (Sn? Cl = 2.4908(16), 2.5447(17) Å; Sn? Br = 2.6875(11), 2.7464(9) Å) and the two donor atoms of the ligand (Sn? N = 2.407(4), 2.471(4) Å and 2.360(5), 2.455(5) Å). In both cases, the Sn? N(pyridine) bond length is markedly longer than the Sn? N(pyrazole) distance. Copyright © 2003 John Wiley & Sons, Ltd.     

Characterization of reduced iso‐α‐acids derived from hops (Humulus lupulus) by NMR

Reduced forms of iso‐α‐acids (isohumulones), used in modern beer brewing were separated and characterized by ¹H and ¹³C NMR spectroscopy. Components from mixtures of rho‐iso‐α‐acids, tetrahydro‐iso‐α‐acids, and hexahydro‐iso‐α‐acids were isolated using high‐performance liquid chromatography (HPLC) and analyzed by use of one‐ and two‐dimensional NMR experiments. The data presented assign the identities of the main peaks in the HPLC traces for the reduced iso‐α‐acids. Previous tentative assignments regarding the cis and trans configurations and the structures of the acyl residues of the reduced iso‐α‐acids were confirmed and extensive NMR assignments were made. Furthermore, the previously unknown stereochemistry in the C‐4 side‐chain of the rho‐ and hexahydro‐iso‐α‐acids was assigned. Copyright © 2003 John Wiley & Sons, Ltd.